16f628.lkr

DALI系统主控制器的软件代码

// File: 16f628.lkr
// Linker file for Balast interface by Ross Fosler
//  v1.00 10/29/00	...created...

LIBPATH  .


CODEPAGE   NAME=svector   START=0x0      END=0x3      PROTECTED
CODEPAGE   NAME=ivector   START=0x4      END=0x15     PROTECTED
CODEPAGE   NAME=page      START=0x16     END=0x7FF
CODEPAGE   NAME=.idlocs   START=0x2000   END=0x2003   PROTECTED
CODEPAGE   NAME=.config   START=0x2007   END=0x2007   PROTECTED
CODEPAGE   NAME=eedata	  START=0x2100	 END=0x217F   PROTECTED	

DATABANK   NAME=sfr0      START=0x0      END=0x1F     PROTECTED
DATABANK   NAME=sfr1      START=0x80     END=0x9F     PROTECTED
DATABANK   NAME=sfr2      START=0x100    END=0x11F    PROTECTED
DATABANK   NAME=sfr3      START=0x180    END=0x19F    PROTECTED

DATABANK   NAME=gpr0      START=0x20     END=0x6F
DATABANK   NAME=gpr1      START=0xA0     END=0xEF
DATABANK   NAME=gpr2      START=0x120    END=0x14F

SHAREBANK  NAME=gprnobnk  START=0x70     END=0x7F
SHAREBANK  NAME=gprnobnk  START=0xF0     END=0xFF
SHAREBANK  NAME=gprnobnk  START=0x170    END=0x17F
SHAREBANK  NAME=gprnobnk  START=0x1F0    END=0x1FF



//*****************************************************************************
SECTION	   NAME=MAIN_DATA	RAM=gpr0  //Required defined variables
SECTION	   NAME=MAIN_OTHER_DATA	RAM=gpr0
SECTION	   NAME=COUNTERS	RAM=gpr0
//*****************************************************************************


//*****************************************************************************
SECTION	NAME=STARTUP  	ROM=svector    	// Reset and interrupt vectors
SECTION	NAME=IDLOCS   	ROM=.idlocs    	// ID locations
SECTION	NAME=CONFIG   	ROM=.config    	// Configuration bits location
SECTION	NAME=INTVCT	ROM=ivector    	// Interrupt vector code

//SECTION	NAME=COM_JUMP1	ROM=page	//Command Jump Routine one
//SECTION	NAME=C0		ROM=page	// Command 0
//SECTION	NAME=C1		ROM=page	// Command 1
//SECTION	NAME=C2		ROM=page	// Command 2
//SECTION	NAME=C3		ROM=page	// Command 3
//SECTION	NAME=C4		ROM=page	// Command 4
//SECTION	NAME=C5		ROM=page	// Command 5
//SECTION	NAME=C6		ROM=page	// Command 6
//SECTION	NAME=C16_31	ROM=page	// Command 16-31
//*****************************************************************************