pmsm_parameter_init_220708.m

jh knink jhbjhbv vhvhvg vhvghv hgvhv h hgv hgv h hbvhvhvghvh vhvhgvhvhvh hv hv hvhg hv h

close all; clear all; clc;

Rs = 2.875;  %% Stator Winding Resistance in Ohms.

Lq = 8.5e-3;  %% q-axis Inductance in Henry.

Ld = 8.5e-3;  %% d-axis Inductance in Henry.

PM_Flux = 0.175;  %% Flux Linkage due to Permanent Magnets in Webers.

Jm = 0.8e-3;  %% Motor Inertia in Kg-m^2.

Bm = 0.01;  %% Motor Viscous Friction Coefficient in Nm.sec

p = 4;  %% No of Pairs of Poles.

Vm = 220;  %% Max. Magnitude of the Voltage applied to Stator in Volts.

fs = 50; %% Frequency of the Stator applied Voltage in Hz.

Ws = 2*pi*fs; %% Frequency of the Stator applied Voltage in rad/sec.

TL_IP = 10.0;  %% Applied Torque Input to the PMSM in Newtons.

T_simu = 1e-5;  %% Simulation Step Time in the SIMULINK Model (secs).

T_stop = 0.2; %% Simulation STOP Time in the SIMULINK Model (secs).

radpsec2rpm = 60/(2*pi);  %% Rad/sec to RPM Conversion Factor.

rpm2radpsec = (2*pi)/60; %% RPM to Rad/sec Conversion Factor.