brew_emu.dat

BREW SDK 3.1。BREW应用程序的开发包。

[General]
Converted=1
Location=88,88,844,952
[Settings]
PhoneFile=..\Devices\DevicePack1\DevicePack1.dpk
AppletDir=..\examples\
MIFDir=..\examples\
SpecifyMIF=0
MMC1Dir=

[Network]
LastUsed=3
Count=8

[Network1]
Name=IS-95A
TrafficUp=4
TrafficDown=4
PPPOpen=3
PPPClose=3
ForwardBPS=14400
ReverseBPS=14400
Type=1

[Network2]
Name=IS-95B
TrafficUp=4
TrafficDown=4
PPPOpen=3
PPPClose=3
ForwardBPS=64000
ReverseBPS=64000
Type=2

[Network3]
Name=CDMA2000 1x (Release 0)
TrafficUp=2
TrafficDown=2
PPPOpen=2
PPPClose=2
ForwardBPS=153600
ReverseBPS=38600
Type=3 

[Network4]
Name=CDMA2000 1x (Release A)
TrafficUp=2
TrafficDown=2
PPPOpen=2
PPPClose=2
ForwardBPS=307000
ReverseBPS=153600
Type=4

[Network5]
Name=UMTS
TrafficUp=2
TrafficDown=2
PPPOpen=2
PPPClose=2
ForwardBPS=384000
ReverseBPS=64000
Type=5 

[Network6]
Name=GSM
TrafficUp=4
TrafficDown=4
PPPOpen=3
PPPClose=3
ForwardBPS=9600
ReverseBPS=9600
Type=6

[Network7]
Name=CDMA2000 1xEV-DO
TrafficUp=2
TrafficDown=2
PPPOpen=2
PPPClose=2
ForwardBPS=2460000
ReverseBPS=153600
Type=7

[Network8]
Name=Custom
TrafficUp=0
TrafficDown=0
PPPOpen=0
PPPClose=0
ForwardBPS=0
ReverseBPS=0

[OutputWindow]
Location=94,156,624,570
Show=0

[FileSystem]
; You may add the extension to be excluded to any of the following three lists.
; NOTE: DO NOT insert spaces anywhere in the string!
ExcludeExts1=bid,brc,brh,bri,brx,bsc,c,dbg,def,dep,dll,dsp,dsw,elf,exe,exp,h,idb,ilk,lib,mak,map,ncb,o,obj,opt,pbi,pbo,pch,pdb,plg,res,sbr
ExcludeExts2=aac,amr,bci,bmp,gif,imy,jpg,mid,mmf,mp3,mp4,pmd,png,qcf,qcp,spf,wav
ExcludeExts3=

[SMS]
; 1 - UASMS
; 2 - WMS-CDMA
; 3 - WMS-GSM
SMSImplementation = 2

[misalign]
feature=off

[IgnoreMisalign]
;
; This section is designed for BREW Simulator to record components from which the user
; specifies misalign exceptions to be ignored permanently.
; BREW Simulator writes to this section all such components per usre request as simulation goes.
;
; The syntax is Modules=component_name,component_name...
;                       component_name
;                       component_name
;                       ...
;
; When multiple multiple modules are specified in a line, they should be separated by comma (',').
; There can be multiple lines (each with multiple components).
; Leading and trailing spaces are ignored.
;
; While multiple components are allowed per line, when BREW Simulator writes to this section, it always
; write only one component per line for better readability.  In other words, if this section was manual
; modified, the format might change afterwards by the Simulator when it rewrites the key to this section.
;
; In-between lines comments are OK.
; These comments are pushed to the end immediately after the key when BREW Simulator rewrites it.
;
; As this feature is mainly designed for BREW_Simulator itself to use, BREW_Simulator
;	does only minimum check on the syntax.
;	Please pay special attention when modifying this section manually.
;
; For example, to ignore all misalign exceptions from all sample BREW applications,
;	remove the first ";" from lines below.
;
;Modules=expensetracker.dll
;        mediaplayer.dll
;        netdiagnostics.dll
;        roadwarrior.dll
;        whiteboard.dll

[GPS Emulation]
Type=1
File=.\datafiles\todowntown.bgp
Delay=0
Cycle=0
Port=