181.txt

1000 HOWTOs for various needs [WINDOWS]

                            ANARCHY 'N' EXPLOSIVES
                            =====> VOLUME 3 <=====

  This is the MOST important or one of the most important volumes regarding
the various mixtures of anarchy that I will be "publishing" to the "public".
Also, it may as well be the MOST DANGEROUS to prepare, the substance we will
be dealing with is Trinitrotoluene, or short - TNT. This high expolosive
is a VERY DANGEROUS, slightly unstable substance. The crystalized crude TNT
is about the color of brown sugar and feels greasy to the touch. It is
suitable for many uses as a high-explosive, but not for the use in high-
explosive shells. It is also highly reactive to many other chemical
substances. It can be incorporated into dynamite and many other explosives
that will be explained in further detail later, in other volumes of ANARCHY.

                                   WARNING:
  DO NOT ATTEMPT TO FINISH THIS PROJECT UNLESS YOU ARE FULLY CAPABLE SAFELY
  EXECUTING THE PROCESSES IN A SAFE ENVIRONMENT! IF YOU CHOOSE TO CONTINUE,
    READ THE INSTRUCTIONS COMPLETELY THROUGH BEFORE BEGINNING AND HAVE ALL
  MATERIALS AND TOOLS (INCLUDING SAFETY/EMERGENCY EQUIPTMENT) READY FOR USE
  WHEN OR IF THEY ARE NEEDED. THIS IS NOT A JOKE! USE AT YOUR OWN RISK!!!!!

  Preparation of Trinitrotoluene (Three Stages). A mixture of 294 grams
    of concentrated sulfuric acid (density 1.84) and 147 grams of nitric
    acid (density 1.42) is added slowly from a dropping funnel to 100
    grams of toluene in a tall 600-cc. beaker, while the liquid is stirred
    vigorously with an electric stirrer and it's temperature is maintained
    at 30 to 40 degrees celsius by running cold water in the vessel in
    which the beaker is standing. The addition of acid will require from an
    hour to an hour and a half. The stirring is then continued for half an
    hour longer without cooling; the mixture is allowed to stand over night
    in a separatory funnel; the lower layer of spent acid is drawn off; and
    the crude mononitrotoluene is weighed. One-half of it, corresponding to
    50 grams of toluene, is taken for the dinitration.
      The mononitrotoluene (MNT) is dissolved in 109 grams of concentrated
    sulfuric acid (d. 1.84) while the mixture is cooled in running water.
    The solution in a tall beaker is warmed to 50 degrees
  and a mixed acid,
    composed of 54.5 grams each of nitric acid (d. 1.50) and sulfuric acid
    (d. 1.84), is added slowly drop by drop from a dropping funnel while
    the mixture is stirred mechanically. The heat generated by the reaction
    raises the temperature, and the rate of addition of the acid is regulated
    so that the temperature of the mixture lies always between 90 degrees
    and 100 degrees. The addition of the acid will require about 1 hour.
    After the acid has been added, the mixture is stirred for 2 hours longer
    at 90-100 degrees to complete the nitration. Two layers seperate on
    standing. The upper layer consists largely of dinitrotoluene (DNT), but
    probobly contains a certain amount of TNT. The trinitration in the
    laboratory is converniently carried out without separating the DNT from
    the spent acid.

      While the dinitration mixture is stirred actively at a temperature of
    about 90 degrees, 145 grams of fuming sulfuric aced (oleum containing
    15% free SO3) is added slowly by pouring from a beaker. A mixed acid,
    composed of 72.5 grams each of nitric acid (d. 1.50) and the 15% oleum,
    is now added drop by drop with good agitation while the heat of the
    reaction maintains the temperature at 100-115 degrees. After about
    three-quarters of the acid has been added, it will be found necessary
    to apply external heat to maintain the temperature. After all the acid
    has been added (taking 1 1/2 to 2 hours), the heating and stirring are
    continued for 2 hours longer at 100-115 degrees. After the material has
    stood overnight, the upper TNT layer will be found to have solidified
    to a hard cake, and the lower layer of spent acid to be filled with
    cdata  bstals. The acid is filtered through a Buchner funnel (without filter
    paper), and the cake is broken up and washed with water on the same
    filter to remove excess of acid. The spent acid contains considerable
    amounts of TNT in solution; this is precipitated by pouring the acid
    into a large volume of water, filtered off, rinsed with water, and added
    to the main batch. All the of the product is washed three or four times
    by agitating it vigorously with hot water under which it is melted.
    After the last washing, the TNT is  granulated by allowing it to cool
    slowly under hot water while the stirring is continued. The product,
    filtered off and dried at ordinary room temperature, is equal to a good
    commercial sample of crude TNT. It may be purified by dissolving in warm
    alcohol at 60 degrees and allowing to cool slowly, or it may be purified
    by digesting with 5 times its weight of 5% sodium hydrogen sulfite
    solution at 90 degrees for half an hour with vigorous stirring, washing
    with hot water until the washings are colorless, and finally granulating
    as before. The product of this last treatment is equal to a good
    commercial sample of purified TNT. Pure ALPHA-TNT, melting point 80.8
    degrees, may be procured by recrystallizing this material once from
    nitric acid (d. 1.42) and once from alcohol.

                 Well, that's it... AND REMEMBER MY WARNING!

future editions of ANARCHY 'N' EXPLOSIVES comming soon.....
                                    (whenever I have time to type them up!)



by Doctor Dissector of course!



---------------------------------------