📄 16巡检仪.searchresults
字号:
KEYdeal.c: kr=3;
KEYdeal.c: kr=3;
KEYdeal.c: kr=2;
KEYdeal.c: kr=2;
KEYdeal.c: kr=2;
KEYdeal.c: kr=2;
KEYdeal.c: kr=2;
KEYdeal.c: kr=3;
KEYdeal.c: kr=2;
KEYdeal.c: flashByteR(LEDbuf, kr, leng, 4);
VFdeal.c: bit kr1=1;
VFdeal.c: default:kr1=0;
VFdeal.c: if(kr1!=0)
---- kt Matches (6 in 2 files) ----
KEYdeal.c: bit kt=1;
KEYdeal.c: default:kt=0;
KEYdeal.c: default:kt=0;
KEYdeal.c: default:kt=0;
KEYdeal.c: if(kt!=0)
Reg51.h (c:\documents and settings\administrator\桌面\16路巡检仪):Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
---- leng Matches (57 in 1 files) ----
KEYdeal.c: uint leng,sysleng,funleng,temp;
KEYdeal.c: sysleng=wk*16;
KEYdeal.c: funleng=wt*16;
KEYdeal.c: leng=0;
KEYdeal.c: leng=4;
KEYdeal.c: // leng=96+portl;
KEYdeal.c: leng=8;
KEYdeal.c: leng=12;
KEYdeal.c: leng=4;
KEYdeal.c: leng=20;
KEYdeal.c: leng=24+sysleng;
KEYdeal.c: leng=28+sysleng;
KEYdeal.c: leng=32+sysleng;
KEYdeal.c: leng=36+sysleng;
KEYdeal.c: leng=16;
KEYdeal.c: leng=284+funleng;
KEYdeal.c: leng=288+funleng;
KEYdeal.c: leng=292+funleng;
KEYdeal.c: leng=296+funleng;
KEYdeal.c: leng=300+funleng;
KEYdeal.c: leng=280;
KEYdeal.c: leng=36;
KEYdeal.c: leng=40;
KEYdeal.c: leng=44;
KEYdeal.c: leng=48;
KEYdeal.c: leng=52;
KEYdeal.c: leng=56;
KEYdeal.c: leng=32;
KEYdeal.c: leng=64;
KEYdeal.c: leng=68;
KEYdeal.c: leng=72;
KEYdeal.c: leng=76;
KEYdeal.c: leng=80;
KEYdeal.c: leng=84+portl;
KEYdeal.c: leng=88+portl;
KEYdeal.c: leng=92+portl;
KEYdeal.c: leng=96+portl;
KEYdeal.c: leng=32;
KEYdeal.c: leng=4;
KEYdeal.c: leng=16;
KEYdeal.c: leng=280;
KEYdeal.c: leng=16;
KEYdeal.c: leng=280;
KEYdeal.c: leng=32;
KEYdeal.c: leng=4;
KEYdeal.c: flashByteR(LEDbuf, kr, leng, 4);
---- pp Matches (18 in 2 files) ----
float to HEX.c:uchar pp;
float to HEX.c: pp=0;
float to HEX.c: pp=1;
float to HEX.c: pp=2;
float to HEX.c: pp=3;
float to HEX.c: pp=3;
float to HEX.c: pp=3;
float to HEX.c: pp=3;
float to HEX.c: pp=0;
LEDdeal.c:extern uchar pp;
LEDdeal.c: if(pp==1)
LEDdeal.c: else if(pp==2)
LEDdeal.c: else if(pp==3)
LEDdeal.c: pp=0;
LEDdeal.c: if(pp==1)
LEDdeal.c: else if(pp==2)
LEDdeal.c: else if(pp==3)
LEDdeal.c: pp=0;
---- pp Matches (18 in 2 files) ----
float to HEX.c:uchar pp;
float to HEX.c: pp=0;
float to HEX.c: pp=1;
float to HEX.c: pp=2;
float to HEX.c: pp=3;
float to HEX.c: pp=3;
float to HEX.c: pp=3;
float to HEX.c: pp=3;
float to HEX.c: pp=0;
LEDdeal.c:extern uchar pp;
LEDdeal.c: if(pp==1)
LEDdeal.c: else if(pp==2)
LEDdeal.c: else if(pp==3)
LEDdeal.c: pp=0;
LEDdeal.c: if(pp==1)
LEDdeal.c: else if(pp==2)
LEDdeal.c: else if(pp==3)
LEDdeal.c: pp=0;
---- TMing1 Matches (6 in 2 files) ----
Inttrup.c:extern uchar keyn,Chose,TMing1;
Inttrup.c: TMing1++;
Inttrup.c: TMing1=0;
KEYdeal.c:uchar keyn=0,TMing1=0;
KEYdeal.c: case zcdisplay: if(TMing1>20)
KEYdeal.c: TMing1=0;
---- Sampldata Matches (12 in 3 files) ----
Inttrup.c:extern uint Sampldata1;
KEYdeal.c: temp=Sampldata-SampldataG;
VFdeal.c:uint Sampldata1=0;
VFdeal.c: X=(Sampldata-SampldataG)*100.0/VR[VFport-1];
VFdeal.c: X=(Sampldata-SampldataG)*280.98/AR[VFport-1];
VFdeal.c: X=(Sampldata-SampldataG)*5.0/VR[VFport-1];
VFdeal.c: X=(Sampldata-SampldataG)*20.0/IR[VFport-1];
---- cytwo Matches (7 in 2 files) ----
Inttrup.c:extern bit cytwo;
Inttrup.c: { if(cytwo==1)
Inttrup.c: if(cytwo==0)
Sysint.c:bit cytwo=0;
Sysint.c: if(cytwo==0)
Sysint.c: cytwo=1;
Sysint.c: cytwo=0;
---- vfcy Matches (4 in 2 files) ----
Inttrup.c:bit vfcy;
VFdeal.c:extern bit vfcy,vfmark;
VFdeal.c: if(vfcy==1) //采集完一路 采集下一路
VFdeal.c: vfcy=0;
---- tt Matches (30 in 5 files) ----
Flash.c: uchar tt=0;
Flash.c: if((ty*4)==512*tt)
Flash.c: tt++;
Head.h:#define settime 4 //设置LED刷新时间
Head.h:#define settime 4
Hex to bcd.ASM:; 程序来源： http://www.yymcu.com
Hex to bcd.ASM:; 欢迎防问： http://www.yymcu.com
Inttrup.c:uchar count,kcout,jitter,jiasu,KEYbuf[4],VFnowt,Refreshtime=settime,countt=1;
Inttrup.c:uchar tt=0;
Inttrup.c: Refreshtime=settime; //重装刷新时间
Inttrup.c: tt=0;
Inttrup.c: { jitter++; //判断键盘是否有没按下
Inttrup.c: jitter=0; //无键盘按下
Inttrup.c: if(jitter==30) //给键盘赋值
Inttrup.c: jitter=0;
Inttrup.c: tt++;
Inttrup.c: if(tt>=8)
Inttrup.c: tt=0;
KEYdeal.c: float adatt;
KEYdeal.c: { adatt=dotdat[dot[wk]];
KEYdeal.c: rangeL[wk]+=adatt;
KEYdeal.c: rangeH[wk]+=adatt;
KEYdeal.c: warmH[wt]+=adatt;
KEYdeal.c: warmL[wt]+=adatt;
KEYdeal.c: rangeL[wk]-=adatt;
KEYdeal.c: rangeH[wk]-=adatt;
KEYdeal.c: warmH[wt]-=adatt;
KEYdeal.c: warmL[wt]-=adatt;
---- port Matches (71 in 6 files) ----
Deal.c: switch(typdat[VFport]) //选择输入类型
Deal.c: if(typdat[VFport]<=11) //热电偶
Deal.c: PV[VFport]=temp1[0]+temp1[1]*X+temp1[2]*X*X+temp1[3]*X*X*X+temp1[4]*X*X*X*X;//计算采样值
Deal.c: else if(typdat[VFport]<=13)
Deal.c: PV[VFport]=pvdat[3]/VR[VFport]*(rangeH[VFport]-rangeL[VFport])+rangeL[VFport];
Deal.c: else if(typdat[VFport]<=16)
Deal.c: PV[VFport]=pvdat[3]/IR[VFport]*(rangeH[VFport]-rangeL[VFport])+rangeL[VFport];
Inttrup.c:extern uchar keyn,Chose,TMing1,VFport;
KEYdeal.c:extern uchar xdata port;
KEYdeal.c:{ uchar kr,portl,wk,wt;
KEYdeal.c: portl=(port-1)*12;
KEYdeal.c: leng=96+portl;
KEYdeal.c: leng=84+portl;
KEYdeal.c: leng=88+portl;
KEYdeal.c: leng=92+portl;
KEYdeal.c: leng=96+portl;
KEYdeal.c: case jianyan5: if(port<road)
KEYdeal.c: port++;
KEYdeal.c: Hex2Bcd(port,si);
KEYdeal.c: case jianyan6: AR[port-1]=temp;
KEYdeal.c: case jianyan7: temp=pvdat1[port-1]<<8|pvdat11[port-1]-pvdat3[port-1]<<8|pvdat33[port-1];
KEYdeal.c: IR[port-1]=temp;
KEYdeal.c: Hex2Bcd(IR[port-1],si);
KEYdeal.c: case jianyan8: VR[port]=temp;
KEYdeal.c: case jianyan5: if(port>1)
KEYdeal.c: port--;
KEYdeal.c: Hex2Bcd(port,si);
KEYdeal.c: case jianyan6: AR[port-1]=temp;
KEYdeal.c: case jianyan7: IR[port-1]=temp;
KEYdeal.c: Hex2Bcd(IR[port-1],si);
KEYdeal.c: case jianyan8: VR[port-1]=temp;
KEYdeal.c: Hex2Bcd(VR[port-1],si);
LEDdeal.c:uchar VFport1=1;
LEDdeal.c: { if(VFport1<16)
LEDdeal.c: VFport1++;
LEDdeal.c: VFport1=1;
LEDdeal.c: { if(VFport1<16)
LEDdeal.c: VFport1++;
LEDdeal.c: VFport1=1;
LEDdeal.c: floatToBCD(PV[VFport1-1], LEDbuf1);
LEDdeal.c: Hex2Bcd((int)VFport1,LEDbuf1);
Sysint.c:extern uchar xdata port;
Sysint.c:extern uchar VFport,VFnowt;
Sysint.c: VFstart(VFport);
VFdeal.c:extern uchar xdata collt,port, typdat[16];
VFdeal.c:uchar VFport=0;
VFdeal.c: if(typdat[VFport]<=11)
VFdeal.c: if(typdat[VFport]<=8)
VFdeal.c: X=pvdat[4]*100.0/VR[VFport]
VFdeal.c: else if(typdat[VFport]<=11)
VFdeal.c: X=pvdat[4]*280.98/AR[VFport];
VFdeal.c: else if(typdat[VFport]<=13)
VFdeal.c: X=pvdat[4]*5.0/VR[VFport];
VFdeal.c: else if(typdat[VFport]<=16)
VFdeal.c: X=pvdat[4]*20.0/IR[VFport];
VFdeal.c: if((VFport<15)&&(dt==1))
VFdeal.c: VFport++;
VFdeal.c: VFport=0;
VFdeal.c: VFstart(VFport);
---- port Matches (69 in 6 files) ----
Deal.c: switch(typdat[VFport]) //选择输入类型
Deal.c: if(typdat[VFport]<=11) //热电偶
Deal.c: PV[VFport]=temp1[0]+temp1[1]*X+temp1[2]*X*X+temp1[3]*X*X*X+temp1[4]*X*X*X*X;//计算采样值
Deal.c: else if(typdat[VFport]<=13)
Deal.c: PV[VFport]=pvdat[3]/VR[VFport]*(rangeH[VFport]-rangeL[VFport])+rangeL[VFport];
Deal.c: else if(typdat[VFport]<=16)
Deal.c: PV[VFport]=pvdat[3]/IR[VFport]*(rangeH[VFport]-rangeL[VFport])+rangeL[VFport];
Inttrup.c:extern uchar keyn,Chose,TMing1,VFport;
KEYdeal.c:extern uchar xdata port;
KEYdeal.c:{ uchar kr,portl,wk,wt;
KEYdeal.c: portl=VFport*12;
KEYdeal.c: leng=96+portl;
KEYdeal.c: leng=84+portl;
KEYdeal.c: leng=88+portl;
KEYdeal.c: leng=92+portl;
KEYdeal.c: leng=96+portl;
KEYdeal.c: case jianyan5: if(VFport<15)
KEYdeal.c: VFport++;
KEYdeal.c: Hex2Bcd(VFport,si);
KEYdeal.c: AR[VFport]=pvdat[3];
KEYdeal.c: Hex2Bcd(AR[VFport],si);
KEYdeal.c: IR[VFport]=pvdat[3];
KEYdeal.c: Hex2Bcd(IR[VFport],si);
KEYdeal.c: VR[VFport]=pvdat[3];
KEYdeal.c: Hex2Bcd(VR[VFport],si);
KEYdeal.c: case jianyan5: if(port>1)
KEYdeal.c: port--;
KEYdeal.c: Hex2Bcd(port,si);
KEYdeal.c: case jianyan6: AR[port-1]=temp;
KEYdeal.c: case jianyan7: IR[port-1]=temp;
KEYdeal.c: Hex2Bcd(IR[port-1],si);
KEYdeal.c: case jianyan8: VR[port-1]=temp;
KEYdeal.c: Hex2Bcd(VR[port-1],si);
LEDdeal.c:uchar VFport1=1;
LEDdeal.c: { if(VFport1<16)
LEDdeal.c: VFport1++;
LEDdeal.c: VFport1=1;
LEDdeal.c: { if(VFport1<16)
LEDdeal.c: VFport1++;
LEDdeal.c: VFport1=1;
LEDdeal.c: floatToBCD(PV[VFport1-1], LEDbuf1);
LEDdeal.c: Hex2Bcd((int)VFport1,LEDbuf1);
Sysint.c:extern uchar xdata port;
Sysint.c:extern uchar VFport,VFnowt;
Sysint.c: VFstart(VFport);
VFdeal.c:extern uchar xdata collt,port, typdat[16];
VFdeal.c:uchar VFport=0;
VFdeal.c: if(typdat[VFport]<=11)
VFdeal.c: if(typdat[VFport]<=8)
VFdeal.c: X=pvdat[4]*100.0/VR[VFport]
VFdeal.c: else if(typdat[VFport]<=11)
VFdeal.c: X=pvdat[4]*280.98/AR[VFport];
VFdeal.c: else if(typdat[VFport]<=13)
VFdeal.c: X=pvdat[4]*5.0/VR[VFport];
VFdeal.c: else if(typdat[VFport]<=16)
VFdeal.c: X=pvdat[4]*20.0/IR[VFport];
VFdeal.c: if((VFport<15)&&(dt==1))
VFdeal.c: VFport++;
VFdeal.c: VFport=0;
VFdeal.c: VFstart(VFport);
---- pvdat Matches (36 in 3 files) ----
Deal.c: PV[VFport]=pvdat[3]/VR[VFport]*(rangeH[VFport]-rangeL[VFport])+rangeL[VFport];
Deal.c: PV[VFport]=pvdat[3]/IR[VFport]*(rangeH[VFport]-rangeL[VFport])+rangeL[VFport];
KEYdeal.c:uchar xdata pvdat1[16],pvdat11[16],pvdat2[16],pvdat22[16],pvdat3[16],pvdat33[16];
KEYdeal.c:extern uint pvdat[4];
KEYdeal.c: t0=pvdat[3];
KEYdeal.c: mv=pvdat[3];
KEYdeal.c: bsdatH=pvdat[3];
KEYdeal.c: bsdatL=pvdat[3];
KEYdeal.c: AR[VFport]=pvdat[3];
KEYdeal.c: IR[VFport]=pvdat[3];
KEYdeal.c: VR[VFport]=pvdat[3];
KEYdeal.c: t0=pvdat[3];
KEYdeal.c: mv=pvdat[3];
KEYdeal.c: bsdatH=pvdat[3];
KEYdeal.c: bsdatL=pvdat[3];
KEYdeal.c: AR[VFport]=pvdat[3];
KEYdeal.c: IR[VFport]=pvdat[3];
KEYdeal.c: VR[VFport]=pvdat[3];
VFdeal.c:uint xdata pvdat[4];
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -