digest.txt

emboss的linux版本的源代码

                                  digest 



Function

   Protein proteolytic enzyme or reagent cleavage digest

Description

   digest finds the positions where a specified proteolytic enzyme or
   reagent might cut a peptide sequence.

   This programs allows you to input a protein sequence and to specify
   one proteolytic agent from a list. It will then output a file
   containing the positions where the agent cuts, together with the
   peptides produced.

   Trypsin will not normally cut after a K if it is followed by (e.g.)
   another K or a P. Specifying the qualifier -unfavoured shows those
   cuts. as well as the favoured ones.

   If you wish to emulate a partial digestion, then using the -overlap
   qualifier will display the results from a digest in which all cut
   sites are used and in which one site at a time is not cut. Thus the
   resulting peptide fragments from the cut sites numbered 1, 2, 3, 4
   etc. are shown, plus the fragments produced by cutting at the sites
   1..3, 2..4, etc.

   i.e. fragments containing one potential cut site are also shown.

   If you wish to emulate a very partial digestion (!) then using the
   -allpartials qualifier will do what -overlap did, but also show all
   possible fragments from using all possible combinations of cut sites.
   For example, fragments from the cut sites numbered 1, 2, 3, 4, 5 and
   from the fragments produced by cutting between sites 1..3, 1..4, 1..5,
   2..4, 2..5, 3..5, etc.

   i.e. fragments containing one or more potential cut site are also
   shown.

   If the boolean -ragging is specified then terminal break-up fragments
   are also shown; this can be useful for mass spectrometry. Ragging is
   further controlled by the -termini option which allows you to select
   removal of residues from the N and/or C termini.

Usage

   Here is a sample session with digest


% digest 
Protein proteolytic enzyme or reagent cleavage digest
Input protein sequence(s): tsw:opsd_human
Enzymes and Reagents
         1 : Trypsin
         2 : Lys-C
         3 : Arg-C
         4 : Asp-N
         5 : V8-bicarb
         6 : V8-phosph
         7 : Chymotrypsin
         8 : CNBr
Select number [1]: 
Output report [opsd_human.digest]: 

   Go to the input files for this example
   Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers:
  [-seqall]            seqall     Protein sequence(s) filename and optional
                                  format, or reference (input USA)
   -menu               menu       [1] Select number (Values: 1 (Trypsin); 2
                                  (Lys-C); 3 (Arg-C); 4 (Asp-N); 5
                                  (V8-bicarb); 6 (V8-phosph); 7
                                  (Chymotrypsin); 8 (CNBr))
  [-outfile]           report     [*.digest] Output report file name

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers:
   -aadata             datafile   [Eamino.dat] Molecular weight data for amino
                                  acids
   -unfavoured         boolean    Trypsin will not normally cut after a K if
                                  it is followed by (e.g.) another K or a P.
                                  Specifying this shows those cuts. as well as
                                  the favoured ones.
   -ragging            boolean    Allows semi-specific and non-specific
                                  digestion. This option is particularly
                                  useful for generating lists of peptide
                                  sequences for protein identification using
                                  mass-spectrometry.
   -termini            menu       [1] Select number (Values: 1 (none); 2
                                  (nterm); 3 (cterm); 4 (nterm OR cterm))
   -overlap            boolean    Used for partial digestion. Shows all cuts
                                  from favoured cut sites plus 1..3, 2..4,
                                  3..5 etc but not (e.g.) 2..5. Overlaps are
                                  therefore fragments with exactly one
                                  potential cut site within it.
   -allpartials        boolean    As for overlap but fragments containing more
                                  than one potential cut site are included.

   Associated qualifiers:

   "-seqall" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -rformat2           string     Report format
   -rname2             string     Base file name
   -rextension2        string     File name extension
   -rdirectory2        string     Output directory
   -raccshow2          boolean    Show accession number in the report
   -rdesshow2          boolean    Show description in the report
   -rscoreshow2        boolean    Show the score in the report
   -rusashow2          boolean    Show the full USA in the report
   -rmaxall2           integer    Maximum total hits to report
   -rmaxseq2           integer    Maximum hits to report for one sequence

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write standard output
   -filter             boolean    Read standard input, write standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages

Input file format

   Any protein sequence.

  Input files for usage example

   'tsw:opsd_human' is a sequence entry in the example protein database
   'tsw'

  Database entry: tsw:opsd_human

ID   OPSD_HUMAN     STANDARD;      PRT;   348 AA.
AC   P08100; Q16414;
DT   01-AUG-1988 (Rel. 08, Created)
DT   01-AUG-1988 (Rel. 08, Last sequence update)
DT   15-JUL-1999 (Rel. 38, Last annotation update)
DE   RHODOPSIN.
GN   RHO.
OS   Homo sapiens (Human).
OC   Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Mammalia;
OC   Eutheria; Primates; Catarrhini; Hominidae; Homo.
RN   [1]
RP   SEQUENCE FROM N.A.
RX   MEDLINE; 84272729.
RA   NATHANS J., HOGNESS D.S.;
RT   "Isolation and nucleotide sequence of the gene encoding human
RT   rhodopsin.";
RL   Proc. Natl. Acad. Sci. U.S.A. 81:4851-4855(1984).
RN   [2]
RP   SEQUENCE OF 1-120 FROM N.A.
RA   BENNETT J., BELLER B., SUN D., KARIKO K.;
RL   Submitted (NOV-1994) to the EMBL/GenBank/DDBJ databases.
RN   [3]
RP   REVIEW ON ADRP VARIANTS.
RX   MEDLINE; 94004905.
RA   AL-MAGHTHEH M., GREGORY C., INGLEHEARN C., HARDCASTLE A.,
RA   BHATTACHARYA S.;
RT   "Rhodopsin mutations in autosomal dominant retinitis pigmentosa.";
RL   Hum. Mutat. 2:249-255(1993).
RN   [4]
RP   VARIANT ADRP HIS-23.
RX   MEDLINE; 90136922.
RA   DRYJA T.P., MCGEE T.L., REICHEI E., HAHN L.B., COWLEY G.S.,
RA   YANDELL D.W., SANDBERG M.A., BERSON E.L.;
RT   "A point mutation of the rhodopsin gene in one form of retinitis
RT   pigmentosa.";
RL   Nature 343:364-366(1990).
RN   [5]
RP   VARIANTS ADRP.
RX   MEDLINE; 91051574.
RA   FARRAR G.J., KENNA P., REDMOND R., MCWILLIAM P., BRADLEY D.G.,
RA   HUMPHRIES M.M., SHARP E.M., INGLEHEARN C.F., BASHIR R., JAY M.,
RA   WATTY A., LUDWIG M., SCHINZEL A., SAMANNS C., GAL A.,
RA   BHATTACHARYA S.S., HUMPHRIES P.;
RT   "Autosomal dominant retinitis pigmentosa: absence of the rhodopsin
RT   proline-->histidine substitution (codon 23) in pedigrees from
RT   Europe.";
RL   Am. J. Hum. Genet. 47:941-945(1990).
RN   [6]
RP   VARIANTS ADRP HIS-23; ARG-58; LEU-347 AND SER-347.
RX   MEDLINE; 91015273.


  [Part of this file has been deleted for brevity]

FT                                /FTId=VAR_004816.
FT   VARIANT     209    209       V -> M (EFFECT NOT KNOWN).
FT                                /FTId=VAR_004817.
FT   VARIANT     211    211       H -> P (IN ADRP).
FT                                /FTId=VAR_004818.
FT   VARIANT     211    211       H -> R (IN ADRP).
FT                                /FTId=VAR_004819.
FT   VARIANT     216    216       M -> K (IN ADRP).
FT                                /FTId=VAR_004820.
FT   VARIANT     220    220       F -> C (IN ADRP).
FT                                /FTId=VAR_004821.
FT   VARIANT     222    222       C -> R (IN ADRP).
FT                                /FTId=VAR_004822.
FT   VARIANT     255    255       MISSING (IN ADRP).
FT                                /FTId=VAR_004823.
FT   VARIANT     264    264       MISSING (IN ADRP).
FT                                /FTId=VAR_004824.
FT   VARIANT     267    267       P -> L (IN ADRP).
FT                                /FTId=VAR_004825.
FT   VARIANT     267    267       P -> R (IN ADRP).
FT                                /FTId=VAR_004826.
FT   VARIANT     292    292       A -> E (IN CSNB4).
FT                                /FTId=VAR_004827.
FT   VARIANT     296    296       K -> E (IN ADRP).
FT                                /FTId=VAR_004828.
FT   VARIANT     297    297       S -> R (IN ADRP).
FT                                /FTId=VAR_004829.
FT   VARIANT     342    342       T -> M (IN ADRP).
FT                                /FTId=VAR_004830.
FT   VARIANT     345    345       V -> L (IN ADRP).
FT                                /FTId=VAR_004831.
FT   VARIANT     345    345       V -> M (IN ADRP).
FT                                /FTId=VAR_004832.
FT   VARIANT     347    347       P -> A (IN ADRP).
FT                                /FTId=VAR_004833.
FT   VARIANT     347    347       P -> L (IN ADRP; COMMON VARIANT).
FT                                /FTId=VAR_004834.
FT   VARIANT     347    347       P -> Q (IN ADRP).
FT                                /FTId=VAR_004835.
FT   VARIANT     347    347       P -> R (IN ADRP).
FT                                /FTId=VAR_004836.
FT   VARIANT     347    347       P -> S (IN ADRP).
FT                                /FTId=VAR_004837.
SQ   SEQUENCE   348 AA;  38892 MW;  07443BEA CRC32;
     MNGTEGPNFY VPFSNATGVV RSPFEYPQYY LAEPWQFSML AAYMFLLIVL GFPINFLTLY
     VTVQHKKLRT PLNYILLNLA VADLFMVLGG FTSTLYTSLH GYFVFGPTGC NLEGFFATLG
     GEIALWSLVV LAIERYVVVC KPMSNFRFGE NHAIMGVAFT WVMALACAAP PLAGWSRYIP
     EGLQCSCGID YYTLKPEVNN ESFVIYMFVV HFTIPMIIIF FCYGQLVFTV KEAAAQQQES
     ATTQKAEKEV TRMVIIMVIA FLICWVPYAS VAFYIFTHQG SNFGPIFMTI PAFFAKSAAI
     YNPVIYIMMN KQFRNCMLTT ICCGKNPLGD DEASATVSKT ETSQVAPA
//

Output file format

   The output is a standard EMBOSS report file.

   The results can be output in one of several styles by using the
   command-line qualifier -rformat xxx, where 'xxx' is replaced by the
   name of the required format. The available format names are: embl,
   genbank, gff, pir, swiss, trace, listfile, dbmotif, diffseq, excel,
   feattable, motif, regions, seqtable, simple, srs, table, tagseq

   See: http://emboss.sf.net/docs/themes/ReportFormats.html for further
   information on report formats.

   By default digest writes a 'seqtable' report file.

  Output files for usage example

  File: opsd_human.digest

########################################
# Program: digest
# Rundate: Sat 15 Jul 2006 12:00:00
# Commandline: digest
#    -seqall tsw:opsd_human
# Report_format: seqtable
# Report_file: opsd_human.digest
########################################

#=======================================
#
# Sequence: OPSD_HUMAN     from: 1   to: 348
# HitCount: 14
#
# Complete digestion with Trypsin yields 14 fragments
#
#=======================================

  Start     End Mol_Weight Cterm  Nterm  Sequence
     70     135   7129.319 R      Y      TPLNYILLNLAVADLFMVLGGFTSTLYTSLHGYFVFGP
TGCNLEGFFATLGGEIALWSLVVLAIER
    178     231   6335.495 R      E      YIPEGLQCSCGIDYYTLKPEVNNESFVIYMFVVHFTIP
MIIIFFCYGQLVFTVK
     22      69   5788.873 R      T      SPFEYPQYYLAEPWQFSMLAAYMFLLIVLGFPINFLTL
YVTVQHKKLR
    253     296   5004.085 R      S      MVIIMVIAFLICWVPYASVAFYIFTHQGSNFGPIFMTI
PAFFAK
    136     177   4600.460 R      Y      YVVVCKPMSNFRFGENHAIMGVAFTWVMALACAAPPLA
GWSR
      1      21   2257.495 .      S      MNGTEGPNFYVPFSNATGVVR
    297     311   1728.089 K      Q      SAAIYNPVIYIMMNK
    232     245   1490.538 K      A      EAAAQQQESATTQK
    326     339   1403.457 K      T      NPLGDDEASATVSK
    315     325   1186.476 R      N      NCMLTTICCGK
    340     348    902.950 K      .      TETSQVAPA
    249     252    503.550 K      M      EVTR
    312     314    449.504 K      N      QFR
    246     248    346.378 K      E      AEK

#---------------------------------------
#---------------------------------------

   The header information contains the program name, date of run, name of
   the reagent used to digest the protein and the number of fragments
   reported. The header will report if complete or partial digestion was
   chosen.

   The rest of the file consists of columns holding the following data:
     * The start position of the fragment
     * The end position of the fragment
     * The molecular weight of the fragment
     * The residue before the cut site ('.' if start of sequence)
     * The residue after the second cut site ('.' if end of sequence)
     * The sequence of the fragment.

Data files

   None.

Notes

   None.

References

   None.

Warnings

   None.

Diagnostic Error Messages

   None.

Exit status

   It always exits with a status of 0.

Known bugs

   None.

See also

    Program name                         Description
   antigenic      Finds antigenic sites in proteins
   epestfind      Finds PEST motifs as potential proteolytic cleavage sites
   fuzzpro        Protein pattern search
   fuzztran       Protein pattern search after translation
   helixturnhelix Report nucleic acid binding motifs
   oddcomp        Find protein sequence regions with a biased composition
   patmatdb       Search a protein sequence with a motif
   patmatmotifs   Search a PROSITE motif database with a protein sequence
   pepcoil        Predicts coiled coil regions
   preg           Regular expression search of a protein sequence
   pscan          Scans proteins using PRINTS
   sigcleave      Reports protein signal cleavage sites

Author(s)

   Alan Bleasby (ajb