⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 match.c

📁 Rsync 3.0.5 source code
💻 C
字号:
/* * Block matching used by the file-transfer code. * * Copyright (C) 1996 Andrew Tridgell * Copyright (C) 1996 Paul Mackerras * Copyright (C) 2003-2008 Wayne Davison * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, visit the http://fsf.org website. */#include "rsync.h"extern int verbose;extern int do_progress;extern int checksum_seed;extern int append_mode;int updating_basis_file;static int false_alarms;static int hash_hits;static int matches;static int64 data_transfer;static int total_false_alarms;static int total_hash_hits;static int total_matches;extern struct stats stats;#define TRADITIONAL_TABLESIZE (1<<16)static uint32 tablesize;static int32 *hash_table;#define SUM2HASH2(s1,s2) (((s1) + (s2)) & 0xFFFF)#define SUM2HASH(sum) SUM2HASH2((sum)&0xFFFF,(sum)>>16)#define BIG_SUM2HASH(sum) ((sum)%tablesize)static void build_hash_table(struct sum_struct *s){	static uint32 alloc_size;	int32 i;	/* Dynamically calculate the hash table size so that the hash load	 * for big files is about 80%.  A number greater than the traditional	 * size must be odd or s2 will not be able to span the entire set. */	tablesize = (uint32)(s->count/8) * 10 + 11;	if (tablesize < TRADITIONAL_TABLESIZE)		tablesize = TRADITIONAL_TABLESIZE;	if (tablesize > alloc_size || tablesize < alloc_size - 16*1024) {		if (hash_table)			free(hash_table);		hash_table = new_array(int32, tablesize);		if (!hash_table)			out_of_memory("build_hash_table");		alloc_size = tablesize;	}	memset(hash_table, 0xFF, tablesize * sizeof hash_table[0]);	if (tablesize == TRADITIONAL_TABLESIZE) {		for (i = 0; i < s->count; i++) {			uint32 t = SUM2HASH(s->sums[i].sum1);			s->sums[i].chain = hash_table[t];			hash_table[t] = i;		}	} else {		for (i = 0; i < s->count; i++) {			uint32 t = BIG_SUM2HASH(s->sums[i].sum1);			s->sums[i].chain = hash_table[t];			hash_table[t] = i;		}	}}static OFF_T last_match;/** * Transmit a literal and/or match token. * * This delightfully-named function is called either when we find a * match and need to transmit all the unmatched data leading up to it, * or when we get bored of accumulating literal data and just need to * transmit it.  As a result of this second case, it is called even if * we have not matched at all! * * @param i If >0, the number of a matched token.  If 0, indicates we * have only literal data. **/static void matched(int f, struct sum_struct *s, struct map_struct *buf,		    OFF_T offset, int32 i){	int32 n = (int32)(offset - last_match); /* max value: block_size (int32) */	int32 j;	if (verbose > 2 && i >= 0) {		rprintf(FINFO,			"match at %.0f last_match=%.0f j=%d len=%ld n=%ld\n",			(double)offset, (double)last_match, i,			(long)s->sums[i].len, (long)n);	}	send_token(f, i, buf, last_match, n, i < 0 ? 0 : s->sums[i].len);	data_transfer += n;	if (i >= 0) {		stats.matched_data += s->sums[i].len;		n += s->sums[i].len;	}	for (j = 0; j < n; j += CHUNK_SIZE) {		int32 n1 = MIN(CHUNK_SIZE, n - j);		sum_update(map_ptr(buf, last_match + j, n1), n1);	}	if (i >= 0)		last_match = offset + s->sums[i].len;	else		last_match = offset;	if (buf && do_progress)		show_progress(last_match, buf->file_size);}static void hash_search(int f,struct sum_struct *s,			struct map_struct *buf, OFF_T len){	OFF_T offset, end;	int32 k, want_i, backup;	char sum2[SUM_LENGTH];	uint32 s1, s2, sum;	int more;	schar *map;	/* want_i is used to encourage adjacent matches, allowing the RLL	 * coding of the output to work more efficiently. */	want_i = 0;	if (verbose > 2) {		rprintf(FINFO, "hash search b=%ld len=%.0f\n",			(long)s->blength, (double)len);	}	k = (int32)MIN(len, (OFF_T)s->blength);	map = (schar *)map_ptr(buf, 0, k);	sum = get_checksum1((char *)map, k);	s1 = sum & 0xFFFF;	s2 = sum >> 16;	if (verbose > 3)		rprintf(FINFO, "sum=%.8x k=%ld\n", sum, (long)k);	offset = 0;	end = len + 1 - s->sums[s->count-1].len;	if (verbose > 3) {		rprintf(FINFO, "hash search s->blength=%ld len=%.0f count=%.0f\n",			(long)s->blength, (double)len, (double)s->count);	}	do {		int done_csum2 = 0;		int32 i;		if (verbose > 4) {			rprintf(FINFO, "offset=%.0f sum=%04x%04x\n",				(double)offset, s2 & 0xFFFF, s1 & 0xFFFF);		}		if (tablesize == TRADITIONAL_TABLESIZE) {			if ((i = hash_table[SUM2HASH2(s1,s2)]) < 0)				goto null_hash;			sum = (s1 & 0xffff) | (s2 << 16);		} else {			sum = (s1 & 0xffff) | (s2 << 16);			if ((i = hash_table[BIG_SUM2HASH(sum)]) < 0)				goto null_hash;		}		hash_hits++;		do {			int32 l;			if (sum != s->sums[i].sum1)				continue;			/* also make sure the two blocks are the same length */			l = (int32)MIN((OFF_T)s->blength, len-offset);			if (l != s->sums[i].len)				continue;			/* in-place: ensure chunk's offset is either >= our			 * offset or that the data didn't move. */			if (updating_basis_file && s->sums[i].offset < offset			    && !(s->sums[i].flags & SUMFLG_SAME_OFFSET))				continue;			if (verbose > 3) {				rprintf(FINFO,					"potential match at %.0f i=%ld sum=%08x\n",					(double)offset, (long)i, sum);			}			if (!done_csum2) {				map = (schar *)map_ptr(buf,offset,l);				get_checksum2((char *)map,l,sum2);				done_csum2 = 1;			}			if (memcmp(sum2,s->sums[i].sum2,s->s2length) != 0) {				false_alarms++;				continue;			}			/* When updating in-place, the best possible match is			 * one with an identical offset, so we prefer that over			 * the following want_i optimization. */			if (updating_basis_file) {				int32 i2;				for (i2 = i; i2 >= 0; i2 = s->sums[i2].chain) {					if (s->sums[i2].offset != offset)						continue;					if (i2 != i) {						if (sum != s->sums[i2].sum1)							break;						if (memcmp(sum2, s->sums[i2].sum2,							   s->s2length) != 0)							break;						i = i2;					}					/* This chunk was at the same offset on					 * both the sender and the receiver. */					s->sums[i].flags |= SUMFLG_SAME_OFFSET;					goto set_want_i;				}			}			/* we've found a match, but now check to see			 * if want_i can hint at a better match. */			if (i != want_i && want_i < s->count			    && (!updating_basis_file || s->sums[want_i].offset >= offset			     || s->sums[want_i].flags & SUMFLG_SAME_OFFSET)			    && sum == s->sums[want_i].sum1			    && memcmp(sum2, s->sums[want_i].sum2, s->s2length) == 0) {				/* we've found an adjacent match - the RLL coder				 * will be happy */				i = want_i;			}		    set_want_i:			want_i = i + 1;			matched(f,s,buf,offset,i);			offset += s->sums[i].len - 1;			k = (int32)MIN((OFF_T)s->blength, len-offset);			map = (schar *)map_ptr(buf, offset, k);			sum = get_checksum1((char *)map, k);			s1 = sum & 0xFFFF;			s2 = sum >> 16;			matches++;			break;		} while ((i = s->sums[i].chain) >= 0);	  null_hash:		backup = (int32)(offset - last_match);		/* We sometimes read 1 byte prior to last_match... */		if (backup < 0)			backup = 0;		/* Trim off the first byte from the checksum */		more = offset + k < len;		map = (schar *)map_ptr(buf, offset - backup, k + more + backup)		    + backup;		s1 -= map[0] + CHAR_OFFSET;		s2 -= k * (map[0]+CHAR_OFFSET);		/* Add on the next byte (if there is one) to the checksum */		if (more) {			s1 += map[k] + CHAR_OFFSET;			s2 += s1;		} else			--k;		/* By matching early we avoid re-reading the		   data 3 times in the case where a token		   match comes a long way after last		   match. The 3 reads are caused by the		   running match, the checksum update and the		   literal send. */		if (backup >= s->blength+CHUNK_SIZE && end-offset > CHUNK_SIZE)			matched(f, s, buf, offset - s->blength, -2);	} while (++offset < end);	matched(f, s, buf, len, -1);	map_ptr(buf, len-1, 1);}/** * Scan through a origin file, looking for sections that match * checksums from the generator, and transmit either literal or token * data. * * Also calculates the MD4 checksum of the whole file, using the md * accumulator.  This is transmitted with the file as protection * against corruption on the wire. * * @param s Checksums received from the generator.  If <tt>s->count == * 0</tt>, then there are actually no checksums for this file. * * @param len Length of the file to send. **/void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len){	char file_sum[MAX_DIGEST_LEN];	int sum_len;	last_match = 0;	false_alarms = 0;	hash_hits = 0;	matches = 0;	data_transfer = 0;	sum_init(checksum_seed);	if (append_mode > 0) {		if (append_mode == 2) {			OFF_T j = 0;			for (j = CHUNK_SIZE; j < s->flength; j += CHUNK_SIZE) {				if (buf && do_progress)					show_progress(last_match, buf->file_size);				sum_update(map_ptr(buf, last_match, CHUNK_SIZE),					   CHUNK_SIZE);				last_match = j;			}			if (last_match < s->flength) {				int32 n = (int32)(s->flength - last_match);				if (buf && do_progress)					show_progress(last_match, buf->file_size);				sum_update(map_ptr(buf, last_match, n), n);			}		}		last_match = s->flength;		s->count = 0;	}	if (len > 0 && s->count > 0) {		build_hash_table(s);		if (verbose > 2)			rprintf(FINFO,"built hash table\n");		hash_search(f, s, buf, len);		if (verbose > 2)			rprintf(FINFO,"done hash search\n");	} else {		OFF_T j;		/* by doing this in pieces we avoid too many seeks */		for (j = last_match + CHUNK_SIZE; j < len; j += CHUNK_SIZE)			matched(f, s, buf, j, -2);		matched(f, s, buf, len, -1);	}	sum_len = sum_end(file_sum);	/* If we had a read error, send a bad checksum. */	if (buf && buf->status != 0)		file_sum[0]++;	if (verbose > 2)		rprintf(FINFO,"sending file_sum\n");	write_buf(f, file_sum, sum_len);	if (verbose > 2)		rprintf(FINFO, "false_alarms=%d hash_hits=%d matches=%d\n",			false_alarms, hash_hits, matches);	total_hash_hits += hash_hits;	total_false_alarms += false_alarms;	total_matches += matches;	stats.literal_data += data_transfer;}void match_report(void){	if (verbose <= 1)		return;	rprintf(FINFO,		"total: matches=%d  hash_hits=%d  false_alarms=%d data=%.0f\n",		total_matches, total_hash_hits, total_false_alarms,		(double)stats.literal_data);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -