bulkusr.h

设计一个读不死与写不死的USB程序.一般USB连写四次,别人不去读那个数据.第五次写这个数据就会死掉.本程序就是解决这个问题。

/*++

Copyright (c) 2000  Microsoft Corporation

Module Name:

    sSUsr.h

Abstract:

Environment:

    Kernel mode

Notes:

    Copyright (c) 2000 Microsoft Corporation.  
    All Rights Reserved.

--*/

#ifndef _BULKUSB_USER_H
#define _BULKUSB_USER_H

#include <initguid.h>

// {6068EB61-98E7-4c98-9E20-1F068295909A}
DEFINE_GUID(GUID_CLASS_I82930_BULK, 
//0x873fdf, 0x61a8, 0x11d1, 0xaa, 0x5e, 0x0, 0xc0, 0x4f, 0xb1, 0x72, 0x8b);
0xae18aa60, 0x7f6a, 0x11d4, 0x97, 0xdd, 0x0, 0x1, 0x2, 0x29, 0xb9, 0x59);

/*
#define BULKUSB_IOCTL_INDEX             0x0000


#define IOCTL_BULKUSB_GET_CONFIG_DESCRIPTOR CTL_CODE(FILE_DEVICE_UNKNOWN,     \
                                                     BULKUSB_IOCTL_INDEX,     \
                                                     METHOD_BUFFERED,         \
                                                     FILE_ANY_ACCESS)
                                                   
#define IOCTL_BULKUSB_RESET_DEVICE          CTL_CODE(FILE_DEVICE_UNKNOWN,     \
                                                     BULKUSB_IOCTL_INDEX + 1, \
                                                     METHOD_BUFFERED,         \
                                                     FILE_ANY_ACCESS)

#define IOCTL_BULKUSB_RESET_PIPE            CTL_CODE(FILE_DEVICE_UNKNOWN,     \
                                                     BULKUSB_IOCTL_INDEX + 2, \
                                                     METHOD_BUFFERED,         \
                                                     FILE_ANY_ACCESS)
*/

#define IOCTL_ADAPT_INDEX 0x0000

// Get the driver version
#define IOCTL_ADAPT_GET_DRIVER_VERSION         CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Get the current USBDI version
#define IOCTL_ADAPT_GET_USBDI_VERSION         CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+1, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Get the current device alt interface settings from driver
#define IOCTL_ADAPT_GET_ALT_INTERFACE_SETTING CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+2, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Set the device interface and alt interface setting
#define IOCTL_ADAPT_SELECT_INTERFACE          CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+3, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Get device address from driver
#define IOCTL_ADAPT_GET_ADDRESS               CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+4, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Get number of endpoints for current interface and alt interface setting from driver
#define IOCTL_ADAPT_GET_NUMBER_ENDPOINTS      CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+5, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Get the current device power state
#define IOCTL_ADAPT_GET_DEVICE_POWER_STATE    CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+6,   METHOD_BUFFERED, FILE_ANY_ACCESS)

// Set the device power state
#define IOCTL_ADAPT_SET_DEVICE_POWER_STATE    CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+7,   METHOD_BUFFERED, FILE_ANY_ACCESS)

// Send a raw packet to endpoint 0
#define IOCTL_ADAPT_SEND_EP0_CONTROL_TRANSFER CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+8, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Send/receive data to/from nonep0
#define IOCTL_ADAPT_SEND_NON_EP0_TRANSFER     CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+9, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Simulate a disconnect/reconnect
#define IOCTL_ADAPT_CYCLE_PORT                CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+10, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Reset the pipe
#define IOCTL_ADAPT_RESET_PIPE                CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+11, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Reset the device
#define IOCTL_ADAPT_RESET_PARENT_PORT         CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+12, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Get the current transfer size of an endpoint (in number of bytes)
#define IOCTL_ADAPT_GET_TRANSFER_SIZE         CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+13, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Set the transfer size of an endpoint (in number of bytes)
#define IOCTL_ADAPT_SET_TRANSFER_SIZE         CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+14, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Return the name of the device
#define IOCTL_ADAPT_GET_DEVICE_NAME           CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+15, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Return the "Friendly Name" of the device
#define IOCTL_ADAPT_GET_FRIENDLY_NAME         CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+16, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Abort all outstanding transfers on the pipe
#define IOCTL_ADAPT_ABORT_PIPE                CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+17, METHOD_BUFFERED, FILE_ANY_ACCESS)

// Send/receive data to/from nonep0 w/ direct buffer acccess (no buffering)
#define IOCTL_ADAPT_SEND_NON_EP0_DIRECT       CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+18, METHOD_NEITHER, FILE_ANY_ACCESS)

#define NUMBER_OF_ADAPT_IOCTLS 19 // Last IOCTL_ADAPT_INDEX + 1


#endif