reports.asm

mcs51,2051,x86系列MCU

TITLE "REPORTS.ASM"
;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
;   File:           reports.asm
;   Author:         Steve Roberts    8/2/96
;   Description:    Comprised of three functions that are totally
;                   independent of each other (i.e. called independently)
;                   but all have to do with writing data reports to 
;                   TXFIFO's.
;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include  82930.inc
include  donconst.inc
include  externs.inc

public  SEND_KBD_REPORT_EP2
public  SEND_KBD_REPORT_EP0
public  MOUSE_REPORT_GENERATOR
public  SEND_MOUSE_REPORT


define KBD_REPORT_REQUEST,SPACE=CODE
segment KBD_REPORT_REQUEST
;-------------------------------------------------------------------
;   Function:       SEND_KBD_REPORT_EP2
;   Description:    Sends an eight byte kbd report to TXFIFO2.
;                   Called from within lite_frm.asm when a USB
;                   TXD2 interrupt is received. It is meant to fill
;                   the TXFIFO for the next IN-TOKEN request from the 
;                   host.
;   Regs Preserved: All used
;--------------------------------------------------------------------
SEND_KBD_REPORT_EP2:
    push  R0
    push  WR16
    push  R1

    clr   SBI.4                        ; Clears the TXD2 interrupt bit
    mov   WR16, #KBD_BUFFER_START
CHECK_FIFO_VACANCY_EP2:    
    jnb    TXFLG2.6, FIFO_AVAILABLE_EP2
    jnb    TXFLG2.7, FIFO_AVAILABLE_EP2
    
    jmp    EXIT_SEND_KBD_REPORT_EP2    ; Perhaps flushing the FIFO would   
                                       ; be better, but this shouldn't
                                       ; happen anyways.  If it does, 
                                       ; something else is wrong. 
FIFO_AVAILABLE_EP2:
    mov   R0, #1
    cmp   R0, ERROR_ROLLOVER_STATE
    je    SEND_ERROR_ROLLOVER_STATE_EP2

WRITE_KBD_DATA_EP2:
    mov   R0, @WR16
    mov   TXDAT2, R0
    inc   WR16, #1
    cmp   WR16, #KBD_BUFFER_END       ; If not at end of buffer, keep filling
    jle   WRITE_KBD_DATA_EP2          ; otherwise, done writing dataset
    mov   TXCNT2, #08h
    jmp   EXIT_SEND_KBD_REPORT_EP2

SEND_ERROR_ROLLOVER_STATE_EP2:
    mov   R1, #03h
INITIAL_LOOP_EP2:
    mov   R0, @WR16                  ; Still need to send ID, modifier, &
    mov   TXDAT2, R0                 ; reserved byte
    inc   WR16, #1                   ; All other bytes = 01
    djnz  R1,INITIAL_LOOP_EP2 

    mov   R0, #01h
SEND_ERROR_ROLLOVER_STATE_LOOP_EP2:
    mov   TXDAT2, R0
    inc   WR16, #1
    cmp   WR16, #KBD_BUFFER_END               ; If not at end of buffer, keep filling
    jle   SEND_ERROR_ROLLOVER_STATE_LOOP_EP2  ; otherwise, done writing dataset
    mov   TXCNT2, #08h
     

EXIT_SEND_KBD_REPORT_EP2:
    mov   R0, IDLE_MODE             
    cmp   R0, #2                     ; If in TIMED IDLE mode need to reset
    jne   RETURN_SEND_KBD_REPORT_EP2 ; timer value and restart timer
                        
    mov   TH0, #0E0h                 ; Resets timer value
    mov   TL0, #0BFh
    setb  TCON.4                     ; Restarts timer

RETURN_SEND_KBD_REPORT_EP2:
    pop   R1
    pop   WR16
    pop   R0

    RET

;-------------------------------------------------------------------
;   Function:       SEND_KBD_REPORT_EP0
;   Description:    Sends an eight byte kbd report to TXFIFO0.
;                   Called from within lite_frm.asm when a USB
;                   GET_REPORT(Input) request is detected for EP2.
;   Regs Preserved: All used
;--------------------------------------------------------------------
SEND_KBD_REPORT_EP0:
    push  R0
    push  WR16
    push  R1

    mov   WR16, #KBD_BUFFER_START
 
    mov   R0, #1
    cmp   R0, ERROR_ROLLOVER_STATE
    je    SEND_ERROR_ROLLOVER_STATE_EP0

WRITE_KBD_DATA_EP0:               ; FIFO vacancy not checked since a 
    mov   R0, @WR16               ; flush is done before calling this
    mov   TXDAT0, R0
    inc   WR16, #1
    cmp   WR16, #KBD_BUFFER_END   ; If not at end of buffer, keep filling
    jle   WRITE_KBD_DATA_EP0      ; otherwise, done writing dataset
    mov   TXCNT0, #08h
    jmp   EXIT_SEND_KBD_REPORT_EP0

SEND_ERROR_ROLLOVER_STATE_EP0:
    mov   R1, #03h
INITIAL_LOOP_EP0:
    mov   R0, @WR16               ; Still need to send ID, modifier, &
    mov   TXDAT0, R0              ; reserved byte
    inc   WR16, #1                ; All other bytes = 01
    djnz  R1,INITIAL_LOOP_EP0 

    mov   R0, #01h
SEND_ERROR_ROLLOVER_STATE_LOOP_EP0:
    mov   TXDAT0, R0
    inc   WR16, #1
    cmp   WR16, #KBD_BUFFER_END               ; If not at end of buffer, keep filling
    jle   SEND_ERROR_ROLLOVER_STATE_LOOP_EP0  ; otherwise, done writing dataset    mov   TXCNT0, #08h
    mov   R0, #0
    mov   ERROR_ROLLOVER_STATE, R0
    
EXIT_SEND_KBD_REPORT_EP0:
    pop   R1
    pop   WR16
    pop   R0

    RET
;-------------------------------------------------------------------


define MOUSE_REPORT_REQUEST,SPACE=CODE
segment MOUSE_REPORT_REQUEST
;-------------------------------------------------------------------
;   Function:       SEND_MOUSE_REPORT
;   Description:    Sends a three byte mouse report to TXFIFO3.  It
;                   checks to be sure a FIFO is available & then
;                   checks for data availability. It sends only three
;                   bytes of data each time even if more are available.
;                   Called from IN-TOKEN and Report requests at
;                   "SEND_MOUSE_REPORT".  Called from mouseisr.asm at
;                   " MOUSE_REPORT_GENERATOR".
;   Regs Preserved: All used
;--------------------------------------------------------------------
SEND_MOUSE_REPORT:
    push  WR6
    push  WR30
    push  WR10

    clr   SBI.6                       ; Clears the TXD interrupt in SBI

    mov   R10, MOUSE_DATA_COUNTH      ; Need to make sure there are
    mov   R11, MOUSE_DATA_COUNTL      ; at least 3 bytes in mouse buffer
    cmp   WR10, #MOUSE_DATA_LENGTH    ; Otherwise, exit
    jsge  CALL_MOUSE_REPORT_GENERATOR
    jmp   EXIT_SEND_MOUSE_REPORT
 
CALL_MOUSE_REPORT_GENERATOR:
    lcall MOUSE_REPORT_GENERATOR
 
EXIT_SEND_MOUSE_REPORT:
    pop   WR10
    pop   WR30
    pop   WR6
    ret


MOUSE_REPORT_GENERATOR:
    jnb   TXFLG3.6, FIFO_AVAILABLE        ; Makes sure a fifo is available
    jmp   EXIT_MOUSE_REPORT_GENERATOR     ; If not,exit.

FIFO_AVAILABLE:
    mov   R6, MOUSE_DATA_COUNTH           ; Puts data count in WR6
    mov   R7, MOUSE_DATA_COUNTL               
    cmp   WR6, #MOUSE_DATA_LENGTH         ; Is data count >= 03?
    jsge  WRITE_DATA                      ; If not, get out
    ret

WRITE_DATA:
    mov   R10, MOUSE_BUFFER_ROFFSETH      ; Get offset of first full location
    mov   R11, MOUSE_BUFFER_ROFFSETL      ; in the endpoint buffer
                                          
    mov   WR30, #MOUSE_BUFFER             ; Set WR30 back to buffer start
    add   WR30, WR10                      ; Add offset to first full location

    mov   R0, @WR30
    anl   R0, #040h                       ; Gets bit 6
    cmp   R0, #040h                       ; Checks if it is set
    je    CONTINUE                        ; (bit 6 is always set in first
                                          ;  byte of mouse data packet)
    inc   WR10, #01h
    anl   WR10, #RINGWORDMASK             ; Rollover after buffer end hit
    mov   MOUSE_BUFFER_ROFFSETH, R10
    mov   MOUSE_BUFFER_ROFFSETL, R11

ENTER_CRITICAL_SECTION_A:
    clr   ES                              ; Disable serial interrupt as the
                                          ; SerialISR decs MOUSE_DATA_COUNT
    mov   R10, MOUSE_DATA_COUNTH
    mov   R11, MOUSE_DATA_COUNTL
    dec   WR10, #01h                      ; Get rid of this byte.
    mov   MOUSE_DATA_COUNTH, R10          ; dec. no. of bytes in the Mouse Buffer
    mov   MOUSE_DATA_COUNTL, R11
    setb  ES                              ; Enable serial interrupt
END_CRITICAL_SECTION_A:

    jmp   FIFO_AVAILABLE

CONTINUE:                                 ; First byte now being processed
    add   WR10, #MOUSE_DATA_LENGTH
    anl   WR10, #RINGWORDMASK             ; Rollover after buffer end hit
    mov   MOUSE_BUFFER_ROFFSETH, R10      ; Update Read Offset
    mov   MOUSE_BUFFER_ROFFSETL, R11

ENTER_CRITICAL_SECTION_B:
    clr   ES                              ; Disable serial interrupt
    mov   R10, MOUSE_DATA_COUNTH
    mov   R11, MOUSE_DATA_COUNTL
    sub   WR10, #MOUSE_DATA_LENGTH        ; sub no. of bytes being Xmitted now.
    mov   MOUSE_DATA_COUNTH, R10          ; dec. no. of bytes in the Mouse Buffer
    mov   MOUSE_DATA_COUNTL, R11
    setb  ES                              ; Enable serial interrupt
END_CRITICAL_SECTION_B:

    clr   EPCON3.1
    lcall PUT_REPORT_IN_FIFO              ; Sets up the bits properly.
    setb  EPCON3.1

EXIT_MOUSE_REPORT_GENERATOR:
    ret
;--------------------------------------------------------------------


;---------------------------------------------------------------------
;Function name : PUT_REPORT_IN_FIFO
;Description   : Generates a report from the 3 bytes that the mouse
;                sent back. The bytes are stored at location pointed
;                to by WR30.
;--------------------------------------------------------------------
PUT_REPORT_IN_FIFO:
    mov     R10, @WR30
    anl     R10, #03Fh             ; Makes sure top bits are 0
    mov     R11, R10               ; Save this value in R11

    mov     R7, #GET_MOUSE_BUTTONS
SHIFT_RIGHT:
    srl     R10                    ; Puts mouse button data at LSBs
    djnz    R7, SHIFT_RIGHT

    mov     TXDAT3, #02h           ; This is the Report ID
    mov     TXDAT3, R10            ; Put the modified value in the Fifo

    inc     WR30, #01h
    anl     WR30, #RINGBUFFMASK    ; Rollover to 1000 after 7FF bytes
    mov     R10, @WR30             ; Get next byte (X value)
    anl     R10, #03Fh             ; Makes sure top two bits = 0

    mov     R6, R11                ; Store the top byte in R6

    mov     R7, #GET_MOUSE_X_VALUE ; Shift the first byte 6 times
SHIFT_X_LEFT:                      ; to the left to get the top
    sll     R11                    ; 2 bits of the X co-ordinate.
    djnz    R7, SHIFT_X_LEFT

    orl     R10, R11               ; OR the top two bits in and 
    mov     TXDAT3, R10            ; place it in the fifo.

    inc     WR30, #01h
    anl     WR30, #RINGBUFFMASK    ; Rollover to 1000 after 7FF bytes
    mov     R10, @WR30             ; Get next byte (Y value)
    anl     R10, #03Fh             ; Makes sure top two bits = 0

    mov     R11, R6                ; Restore the top byte in R11
    anl     R11, #0FCh             ; Get rid of the X values in the
                                   ; top byte.
    mov     R7, #GET_MOUSE_Y_VALUE ; Shift the first byte 4 times
SHIFT_Y_LEFT:                      ; to the left to get the top
    sll     R11                    ; 2 bits of the Y co-ordinate.
    djnz    R7, SHIFT_Y_LEFT

    orl     R10, R11               ; OR the top two bits in and 
    mov     TXDAT3, R10            ; store it back.

    mov     TXCNT3, #MOUSE_DATA_LENGTH+1  ; Write the transmit count

RETURN:
    Ret
;-------------------------------------------------------------------