666.ini

mcs51,2051,x86系列MCU

[82930]
Title=82930A
ClockRate=.001 12.0
InstEditIns=USB\misc\666.ins
InstEditMan=USB\help\ie251.hlp
RegEditor=USB\misc\82930.rcd USB\code\82930a.cod USB\code\82930c.cod
DRegEditor=USB\misc\82930.DRE
PeriphEditor=USB\misc\pe82930.idx USB\code\82930a.cod USB\code\82930c.cod
Hilites=USB\misc\hl82930.txt
Q&A=USB\help\qa666.hlp
FACT=USB\help\f666.hlp
VarFile=USB\misc\_df82930.var
CommonGenFileDir=USB\code
GenFile=82930.gen
Sample1=sample1.gen
Sample1Desc=Converts legacy keyboard & mouse signals to USB.
FileDirSample1=USB\code\sample1
Sample2=sample2.gen
Sample2Desc=8x930Ax firmware solution to support function devices.  The assembly file supports the USB 1.0 standard requests and will enumerate the 8x930Ax as a single function device.  The descriptor sets up the device for loopback on EP1, 2 & 3.
FileDirSample2=USB\code\sample2
#enumeration code file generation for Ax
AXENUMCodeGen=ax_enum.gen
AXENUMCodeGenDir=USB\code

[82930H]
Title=82930H
ClockRate=.001 12.0
InstEditIns=USB\misc\666.ins
InstEditMan=USB\help\ie251.hlp
RegEditor=USB\misc\82930H.rcd USB\code\82930Ha.cod USB\code\82930Hc.cod
DRegEditor=USB\misc\82930H.DRE
PeriphEditor=USB\misc\pe82930H.idx USB\code\82930Ha.cod USB\code\82930Hc.cod
Hilites=USB\misc\hl82930H.txt
Q&A=USB\help\qa666.hlp
FACT=USB\help\f666.hlp
VarFile=USB\misc\_df8293H.var
CommonGenFileDir=USB\code
GenFile=82930.gen
Sample1=sample1.gen
Sample1Desc=Legacy to USB converter is done through a combination of a hardware and software interface.  This sample application is the software to convert a PS/2 keyboard and serial mouse to USB.
FileDirSample1=USB\code\sample1
Sample2=sample2.gen
Sample2Desc=8x930Ax firmware solution to support function devices.  The assembly file supports the USB 1.0 standard requests and will enumerate the 8x930Ax as a single function device.  The descriptor sets up the device for loopback on EP1, 2 & 3.
FileDirSample2=USB\code\sample2
Sample3=sample3.gen
Sample3Desc=8x930Hx firmware solution to support the hub and embedded function. These files support the USB 1.0 standard and hub requests and will enumerate the 8x930Hx with 4 downstream ports with internal downstream port 4 as an embedded function.
FileDirSample3=USB\code\sample3
Sample4=sample4.gen
Sample4Desc=8x930Hx firmware solution to support the hub and embedded function with a single source code.  It supports the USB 1.0 standard and hub requests and will enumerate the 8x930Hx with 4 downstream ports, port 4 being the embedded function.
FileDirSample4=USB\code\sample4
#Full Code generation (all files available), for HUB and Embedded function using multi-file viewer.
USBCodeGen=usbcode.gen
USBCodeGenDir=USB\code
#Init code file only generation for HUB and Embedded function using multi-file viewer.
INITCodeGen=usbinit.gen
INITCodeGenDir=USB\code
#Embedded function only Code generation using multi-file viewer.
EMBCodeGen=embonly.gen
EMBCodeGenDir=USB\code
#Hub code only code generation using multi-file viewer.
HUBCodeGen=hubonly.gen
HUBCodeGenDir=USB\code


[Register Editor]
RegSubDir=usb\misc
SaveOption=Query
List_By=DESC

[Instruction Editor]