smartrf_cc2510.prs

本程序是TI研讨会赠送ez430-2500无线通信模块板

FSCTRL1 |0xDF07|0x0A|Frequency synthesizer control.
FSCTRL0 |0xDF08|0x00|Frequency synthesizer control.
FREQ2   |0xDF09|0x5D|Frequency control word, high byte.
FREQ1   |0xDF0A|0x93|Frequency control word, middle byte.
FREQ0   |0xDF0B|0xB1|Frequency control word, low byte.
MDMCFG4 |0xDF0C|0x2D|Modem configuration.
MDMCFG3 |0xDF0D|0x3B|Modem configuration.
MDMCFG2 |0xDF0E|0x73|Modem configuration.
MDMCFG1 |0xDF0F|0x22|Modem configuration.
MDMCFG0 |0xDF10|0xF8|Modem configuration.
CHANNR  |0xDF06|0xEB|Channel number.
DEVIATN |0xDF11|0x01|Modem deviation setting (when FSK modulation is enabled).
FREND1  |0xDF1A|0xB6|Front end RX configuration.
FREND0  |0xDF1B|0x10|Front end RX configuration.
MCSM0   |0xDF14|0x10|Main Radio Control State Machine configuration.
FOCCFG  |0xDF15|0x1D|Frequency Offset Compensation Configuration.
BSCFG   |0xDF16|0x1C|Bit synchronization Configuration.
AGCCTRL2|0xDF17|0xC7|AGC control.
AGCCTRL1|0xDF18|0x00|AGC control.
AGCCTRL0|0xDF19|0xB2|AGC control.
FSCAL3  |0xDF1C|0xEA|Frequency synthesizer calibration.
FSCAL2  |0xDF1D|0x0A|Frequency synthesizer calibration.
FSCAL0  |0xDF1F|0x11|Frequency synthesizer calibration.
TEST2   |0xDF23|0x88|Various test settings.
TEST1   |0xDF24|0x31|Various test settings.
TEST0   |0xDF25|0x0B|Various test settings.
IOCFG2  |0xDF2F|0x0B|GDO2 output pin configuration.
IOCFG0  |0xDF31|0x06|GDO0 output pin configuration. Refer to SmartRF