smdk2410.h

来自「SMDK2440 boot code, base on vivi」· C头文件 代码 · 共 77 行

#include <config.h>
#include <arch/s3c2410.h>

/*
 * Architecture magic and machine type
 */
#define MACH_TYPE		193	
#define VIVI_MAGIC		(0x43090000 | MACH_TYPE)

/*
 * 扁鸥 殿殿
 */
#define FIN			12000000
#define UART_REF_CLK		(50700000)

/*
 * CPU 饭瘤胶磐 汲沥 蔼甸
 */

/* CPU clcok */
/* 50.00 MHz */
#define MDIV_50			0x5c
#define PDIV_50			0x4
#define SDIV_50			0x2
/* 200.00 MHz */
#define MDIV_200		0x5c
#define PDIV_200		0x4
#define SDIV_200		0x0

/* initial values for DRAM */
#define vBWSCON			0x22111110
#define vBANKCON0		0x00000700
#define vBANKCON1		0x00000700
#define vBANKCON2		0x00000700
#define vBANKCON3		0x00000700
#define vBANKCON4		0x00000700
#define vBANKCON5		0x00000700
#define vBANKCON6		0x00018005
#define vBANKCON7		0x00018005
#define vREFRESH		0x008e0459
#define vBANKSIZE		0xb2
#define vMRSRB6			0x30
#define vMRSRB7			0x30

#define vLOCKTIME		0x00ffffff	/* It's a default value */
#define vCLKCON			0x0000fff8	/* It's a default value */
#define vCLKDIVN		0x3		/* FCLK:HCLK:PCLK = 1:2:4 */
#define vMPLLCON_50		((MDIV_50 << 12) | (PDIV_50 << 4) | (SDIV_50)) 
#define vMPLLCON_200		((MDIV_200 << 12) | (PDIV_200 << 4) | (SDIV_200)) 
#define vMPLLCON		vMPLLCON_200

/* initial values for serial */
#define vULCON			0x3	/* UART, no parity, one stop bit, 8 bits */
#define vUCON			0x245
#define vUFCON			0x0
#define vUMCON			0x0

/* inital values for GPIOs */
#define vGPACON			0x007fffff
#define vGPBCON			0x00044555
#define vGPBUP			0x000007ff
#define vGPCCON			0xaaaaaaaa
#define vGPCUP			0x0000ffff
#define vGPDCON			0xaaaaaaaa
#define vGPDUP			0x0000ffff
#define vGPECON			0xaaaaaaaa
#define vGPEUP			0x0000ffff
#define vGPFCON			0x000055aa
#define vGPFUP			0x000000ff
#define vGPGCON			0xff95ffba
#define vGPGUP			0x0000ffff
#define vGPHCON			0x0016faaa
#define vGPHUP			0x000007ff
#define vEXTINT0		0x22222222
#define vEXTINT1		0x22222222
#define vEXTINT2		0x22222222