power.c

VIA VT6655 x86下的Linux Source Code

/*
 * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
 * All rights reserved.
 *
 * This software is copyrighted by and is the sole property of
 * VIA Networking Technologies, Inc. This software may only be used
 * in accordance with the corresponding license agreement. Any unauthorized
 * use, duplication, transmission, distribution, or disclosure of this
 * software is expressly forbidden.
 *
 * This software is provided by VIA Networking Technologies, Inc. "as is"
 * and any express or implied warranties, including, but not limited to, the
 * implied warranties of merchantability and fitness for a particular purpose
 * are disclaimed. In no event shall VIA Networking Technologies, Inc.
 * be liable for any direct, indirect, incidental, special, exemplary, or
 * consequential damages. 
 *
 * File: power.c
 *
 * Purpose: Handles 802.11 power managment  functions
 *
 * Author: Lyndon Chen
 *
 * Date: July 17, 2002
 *
 * Functions: 
 *      PSvEnablePowerSaving - Enable Power Saving Mode
 *      PSvDiasblePowerSaving - Disable Power Saving Mode
 *      PSbConsiderPowerDown - Decide if we can Power Down
 *      PSvSendPSPOLL - Send PS-POLL packet
 *      PSbSendNullPacket - Send Null packet
 *      PSbIsNextTBTTWakeUp - Decide if we need to wake up at next Beacon
 *
 * Revision History:
 *
 */



#if !defined(__TTYPE_H__)
#include "ttype.h"
#endif
#if !defined(__TBIT_H__)
#include "tbit.h"
#endif
#if !defined(__MAC_H__)
#include "mac.h"
#endif
#if !defined(__DEVICE_H__)
#include "device.h"
#endif
#if !defined(__WMGR_H__)
#include "wmgr.h"
#endif
#if !defined(__POWER_H__)
#include "power.h"
#endif
#if !defined(__WCMD_H__)
#include "wcmd.h"
#endif
#if !defined(__TBIT_H__)
#include "tbit.h"
#endif
#if !defined(__UMEM_H__)
#include "umem.h"
#endif
#if !defined(__RXTX_H__)
#include "rxtx.h"
#endif
#if !defined(__CARD_H__)
#include "card.h"
#endif




/*---------------------  Static Definitions -------------------------*/




/*---------------------  Static Classes  ----------------------------*/

/*---------------------  Static Variables  --------------------------*/
static int          msglevel                =MSG_LEVEL_INFO;
/*---------------------  Static Functions  --------------------------*/


/*---------------------  Export Variables  --------------------------*/


/*---------------------  Export Functions  --------------------------*/

/*+
 * 
 * Routine Description:
 * Enable hw power saving functions
 *
 * Return Value:
 *    None.
 *
-*/


VOID
PSvEnablePowerSaving(
    IN HANDLE hDeviceContext,
    IN WORD wListenInterval
    )
{
    PSDevice        pDevice = (PSDevice)hDeviceContext;
    PSMgmtObject    pMgmt = pDevice->pMgmt;
    WORD            wAID = pMgmt->wCurrAID | BIT14 | BIT15;
    
    // set period of power up before TBTT
    VNSvOutPortW(pDevice->PortOffset + MAC_REG_PWBT, C_PWBT);
    if (pDevice->eOPMode != OP_MODE_ADHOC) {
        // set AID
        VNSvOutPortW(pDevice->PortOffset + MAC_REG_AIDATIM, wAID);
    } else {
    	// set ATIM Window
        MACvWriteATIMW(pDevice->PortOffset, pMgmt->wCurrATIMWindow);	
    }
    // Set AutoSleep
    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCFG, PSCFG_AUTOSLEEP);
    // Set HWUTSF
    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_HWUTSF);

    if (wListenInterval >= 2) {
        // clear always listen beacon
        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_ALBCN);
        //pDevice->wCFG &= ~CFG_ALB;
        // first time set listen next beacon
        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_LNBCN);
        pMgmt->wCountToWakeUp = wListenInterval;
    }
    else {
        // always listen beacon
        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_ALBCN);
        //pDevice->wCFG |= CFG_ALB;
        pMgmt->wCountToWakeUp = 0;
    }

    // enable power saving hw function
    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);
    pDevice->bEnablePSMode = TRUE;
    
    if (pDevice->eOPMode == OP_MODE_ADHOC) {
//        bMgrPrepareBeaconToSend((HANDLE)pDevice, pMgmt);
    }
    // We don't send null pkt in ad hoc mode since beacon will handle this.
    else if (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) {
        PSbSendNullPacket(pDevice);
    }
    pDevice->bPWBitOn = TRUE;
    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "PS:Power Saving Mode Enable... \n");    
    return;
}






/*+
 * 
 * Routine Description:
 * Disable hw power saving functions
 *
 * Return Value:
 *    None.
 *
-*/

VOID
PSvDisablePowerSaving(
    IN HANDLE hDeviceContext
    )
{
    PSDevice        pDevice = (PSDevice)hDeviceContext;
//    PSMgmtObject    pMgmt = pDevice->pMgmt;

    // disable power saving hw function
    MACbPSWakeup(pDevice->PortOffset);
    //clear AutoSleep
    MACvRegBitsOff(pDevice->PortOffset, MAC_REG_PSCFG, PSCFG_AUTOSLEEP);
    //clear HWUTSF
    MACvRegBitsOff(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_HWUTSF);
    // set always listen beacon
    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_ALBCN);

    pDevice->bEnablePSMode = FALSE;

    if (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) {
        PSbSendNullPacket(pDevice);
    }    
    pDevice->bPWBitOn = FALSE;
    return;
}


/*+
 * 
 * Routine Description:
 * Consider to power down when no more packets to tx or rx. 
 *
 * Return Value:
 *    TRUE, if power down success
 *    FALSE, if fail  
-*/


BOOL
PSbConsiderPowerDown(
    IN HANDLE hDeviceContext,
    IN BOOL bCheckRxDMA,
    IN BOOL bCheckCountToWakeUp
    )
{
    PSDevice        pDevice = (PSDevice)hDeviceContext;
    PSMgmtObject    pMgmt = pDevice->pMgmt;
    UINT            uIdx;

    // check if already in Doze mode
    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS))
        return TRUE;

    if (pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
        // check if in TIM wake period
        if (pMgmt->bInTIMWake)
            return FALSE;
    }

    // check scan state
    if (pDevice->bCmdRunning)
        return FALSE;

    // Froce PSEN on
    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);

    // check if all TD are empty,
    for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
        if (pDevice->iTDUsed[uIdx] != 0)
            return FALSE;            
    }

    // check if rx isr is clear
    if (bCheckRxDMA && 
        ((pDevice->dwIsr& ISR_RXDMA0) != 0) &&
        ((pDevice->dwIsr & ISR_RXDMA1) != 0)){
        return FALSE;
    };

    if (pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
        if (bCheckCountToWakeUp &&
           (pMgmt->wCountToWakeUp == 0 || pMgmt->wCountToWakeUp == 1)) {
             return FALSE;
        }
    }    

    // no Tx, no Rx isr, now go to Doze
    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_GO2DOZE);
    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Go to Doze ZZZZZZZZZZZZZZZ\n");    
    return TRUE;
}



/*+
 * 
 * Routine Description:
 * Send PS-POLL packet 
 *
 * Return Value:
 *    None.
 *
-*/



VOID
PSvSendPSPOLL(
    IN HANDLE hDeviceContext
    )
{
    PSDevice            pDevice = (PSDevice)hDeviceContext;
    PSMgmtObject        pMgmt = pDevice->pMgmt;
    PSTxMgmtPacket      pTxPacket = NULL;
    

    memset(pMgmt->pbyPSPacketPool, 0, sizeof(STxMgmtPacket) + WLAN_HDR_ADDR2_LEN);
    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyPSPacketPool;
    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
    pTxPacket->p80211Header->sA2.wFrameCtl = cpu_to_le16(
         (
         WLAN_SET_FC_FTYPE(WLAN_TYPE_CTL) | 
         WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_PSPOLL) |
         WLAN_SET_FC_PWRMGT(0)         
         ));
    pTxPacket->p80211Header->sA2.wDurationID = pMgmt->wCurrAID | BIT14 | BIT15;
    memcpy(pTxPacket->p80211Header->sA2.abyAddr1, pMgmt->abyCurrBSSID, WLAN_ADDR_LEN);
    memcpy(pTxPacket->p80211Header->sA2.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
    pTxPacket->cbMPDULen = WLAN_HDR_ADDR2_LEN;
    pTxPacket->cbPayloadLen = 0;
    // send the frame 
    if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send PS-Poll packet failed..\n");
    }
    else {
//        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send PS-Poll packet success..\n");
    };    
    
    return;
}



/*+
 * 
 * Routine Description:
 * Send NULL packet to AP for notification power state of STA 
 *
 * Return Value:
 *    None.
 *
-*/
BOOL
PSbSendNullPacket(
    IN HANDLE hDeviceContext
    )
{   
    PSDevice            pDevice = (PSDevice)hDeviceContext;    
    PSTxMgmtPacket      pTxPacket = NULL;
    PSMgmtObject        pMgmt = pDevice->pMgmt;
    UINT                uIdx;
    
    
    if (pDevice->bLinkPass == FALSE) {
        return FALSE;
    }    
    
    if (pDevice->bEnablePSMode) {
        for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
            if (pDevice->iTDUsed[uIdx] != 0)
                return FALSE;            
        }            
    }
    
    memset(pMgmt->pbyPSPacketPool, 0, sizeof(STxMgmtPacket) + WLAN_NULLDATA_FR_MAXLEN);
    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyPSPacketPool;
    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
    
    if (pDevice->bEnablePSMode) {

        pTxPacket->p80211Header->sA3.wFrameCtl = cpu_to_le16(
             (
            WLAN_SET_FC_FTYPE(WLAN_TYPE_DATA) | 
            WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_NULL) |
            WLAN_SET_FC_PWRMGT(1)            
            ));
    }
    else {
        pTxPacket->p80211Header->sA3.wFrameCtl = cpu_to_le16(
             (
            WLAN_SET_FC_FTYPE(WLAN_TYPE_DATA) | 
            WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_NULL) |
            WLAN_SET_FC_PWRMGT(0)
            ));
    }
    
    if(pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
        pTxPacket->p80211Header->sA3.wFrameCtl |= cpu_to_le16((WORD)WLAN_SET_FC_TODS(1));
    }
    
    memcpy(pTxPacket->p80211Header->sA3.abyAddr1, pMgmt->abyCurrBSSID, WLAN_ADDR_LEN);
    memcpy(pTxPacket->p80211Header->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
    memcpy(pTxPacket->p80211Header->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
    pTxPacket->cbMPDULen = WLAN_HDR_ADDR3_LEN;
    pTxPacket->cbPayloadLen = 0;
    // send the frame 
    if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send Null Packet failed !\n");
        return FALSE;
    }
    else {
//            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send Null Packet success....\n");        
    }                                    


    return TRUE ;
}

/*+
 * 
 * Routine Description:
 * Check if Next TBTT must wake up
 *
 * Return Value:
 *    None.
 *
-*/

BOOL
PSbIsNextTBTTWakeUp(
    IN HANDLE hDeviceContext
    )
{
    
    PSDevice         pDevice = (PSDevice)hDeviceContext;
    PSMgmtObject        pMgmt = pDevice->pMgmt;
    BOOL                bWakeUp = FALSE;
    
    if (pMgmt->wListenInterval >= 2) {
        if (pMgmt->wCountToWakeUp == 0) {
            pMgmt->wCountToWakeUp = pMgmt->wListenInterval;
        }
        
        pMgmt->wCountToWakeUp --;
        
        if (pMgmt->wCountToWakeUp == 1) {
            // Turn on wake up to listen next beacon
            MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_LNBCN);            
            bWakeUp = TRUE;
        }         
             
    }     
            
    return bWakeUp;
}