📄 yaffscfg2k.c
字号:
/* * YAFFS: Yet Another Flash File System. A NAND-flash specific file system. * * Copyright (C) 2002-2007 Aleph One Ltd. * for Toby Churchill Ltd and Brightstar Engineering * * Created by Charles Manning <charles@aleph1.co.uk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. *//* * yaffscfg2k.c The configuration for the "direct" use of yaffs. * * This file is intended to be modified to your requirements. * There is no need to redistribute this file. */#include "yaffscfg.h"#include "yaffsfs.h"#include "yaffs_fileem2k.h"#include "yaffs_nandemul2k.h"#include <errno.h>unsigned yaffs_traceMask = YAFFS_TRACE_SCAN | YAFFS_TRACE_GC | YAFFS_TRACE_GC_DETAIL | YAFFS_TRACE_ERASE | YAFFS_TRACE_TRACING | YAFFS_TRACE_ALLOCATE | YAFFS_TRACE_CHECKPOINT | YAFFS_TRACE_BAD_BLOCKS | YAFFS_TRACE_VERIFY | YAFFS_TRACE_VERIFY_NAND | YAFFS_TRACE_VERIFY_FULL |// (~0) | 0; void yaffsfs_SetError(int err){ //Do whatever to set error errno = err;}void yaffsfs_Lock(void){}void yaffsfs_Unlock(void){}__u32 yaffsfs_CurrentTime(void){ return 0;}static int yaffs_kill_alloc = 0;static size_t total_malloced = 0;static size_t malloc_limit = 0 & 6000000;void *yaffs_malloc(size_t size){ size_t this; if(yaffs_kill_alloc) return NULL; if(malloc_limit && malloc_limit <(total_malloced + size) ) return NULL; this = malloc(size); if(this) total_malloced += size; return this;}void yaffs_free(void *ptr){ free(ptr);}void yaffsfs_LocalInitialisation(void){ // Define locking semaphore.}// Configuration for:// /ram 2MB ramdisk// /boot 2MB boot disk (flash)// /flash 14MB flash disk (flash)// NB Though /boot and /flash occupy the same physical device they// are still disticnt "yaffs_Devices. You may think of these as "partitions"// using non-overlapping areas in the same device.// #include "yaffs_ramdisk.h"#include "yaffs_flashif.h"#include "yaffs_nandemul2k.h"static yaffs_Device ramDev;static yaffs_Device bootDev;static yaffs_Device flashDev;static yaffs_Device ram2kDev;static yaffsfs_DeviceConfiguration yaffsfs_config[] = {#if 0 { "/ram", &ramDev}, { "/boot", &bootDev}, { "/flash/", &flashDev}, { "/ram2k", &ram2kDev}, {(void *)0,(void *)0}#else { "/", &ramDev}, { "/flash/boot", &bootDev}, { "/flash/flash", &flashDev}, { "/ram2k", &ram2kDev}, {(void *)0,(void *)0} /* Null entry to terminate list */#endif};int yaffs_StartUp(void){ // Stuff to configure YAFFS // Stuff to initialise anything special (eg lock semaphore). yaffsfs_LocalInitialisation(); // Set up devices // /ram memset(&ramDev,0,sizeof(ramDev)); ramDev.nDataBytesPerChunk = 512; ramDev.nChunksPerBlock = 32; ramDev.nReservedBlocks = 2; // Set this smaller for RAM ramDev.startBlock = 0; // Can use block 0 ramDev.endBlock = 127; // Last block in 2MB. //ramDev.useNANDECC = 1; ramDev.nShortOpCaches = 0; // Disable caching on this device. ramDev.genericDevice = (void *) 0; // Used to identify the device in fstat. ramDev.writeChunkWithTagsToNAND = yramdisk_WriteChunkWithTagsToNAND; ramDev.readChunkWithTagsFromNAND = yramdisk_ReadChunkWithTagsFromNAND; ramDev.eraseBlockInNAND = yramdisk_EraseBlockInNAND; ramDev.initialiseNAND = yramdisk_InitialiseNAND; // /boot memset(&bootDev,0,sizeof(bootDev)); bootDev.nDataBytesPerChunk = 512; bootDev.nChunksPerBlock = 32; bootDev.nReservedBlocks = 5; bootDev.startBlock = 0; // Can use block 0 bootDev.endBlock = 63; // Last block //bootDev.useNANDECC = 0; // use YAFFS's ECC bootDev.nShortOpCaches = 10; // Use caches bootDev.genericDevice = (void *) 1; // Used to identify the device in fstat. bootDev.writeChunkWithTagsToNAND = yflash_WriteChunkWithTagsToNAND; bootDev.readChunkWithTagsFromNAND = yflash_ReadChunkWithTagsFromNAND; bootDev.eraseBlockInNAND = yflash_EraseBlockInNAND; bootDev.initialiseNAND = yflash_InitialiseNAND; bootDev.markNANDBlockBad = yflash_MarkNANDBlockBad; bootDev.queryNANDBlock = yflash_QueryNANDBlock; // /flash // Set this puppy up to use // the file emulation space as // 2kpage/64chunk per block/128MB device memset(&flashDev,0,sizeof(flashDev)); flashDev.nDataBytesPerChunk = 2048; flashDev.nChunksPerBlock = 64; flashDev.nReservedBlocks = 5; flashDev.nCheckpointReservedBlocks = 5; //flashDev.checkpointStartBlock = 1; //flashDev.checkpointEndBlock = 20; flashDev.startBlock = 0; flashDev.endBlock = 200; // Make it smaller //flashDev.endBlock = yflash_GetNumberOfBlocks()-1; flashDev.isYaffs2 = 1; flashDev.wideTnodesDisabled=0; flashDev.nShortOpCaches = 10; // Use caches flashDev.genericDevice = (void *) 2; // Used to identify the device in fstat. flashDev.writeChunkWithTagsToNAND = yflash_WriteChunkWithTagsToNAND; flashDev.readChunkWithTagsFromNAND = yflash_ReadChunkWithTagsFromNAND; flashDev.eraseBlockInNAND = yflash_EraseBlockInNAND; flashDev.initialiseNAND = yflash_InitialiseNAND; flashDev.markNANDBlockBad = yflash_MarkNANDBlockBad; flashDev.queryNANDBlock = yflash_QueryNANDBlock; // /ram2k // Set this puppy up to use // the file emulation space as // 2kpage/64chunk per block/128MB device memset(&ram2kDev,0,sizeof(ram2kDev)); ram2kDev.nDataBytesPerChunk = nandemul2k_GetBytesPerChunk(); ram2kDev.nChunksPerBlock = nandemul2k_GetChunksPerBlock(); ram2kDev.nReservedBlocks = 5; ram2kDev.startBlock = 0; // First block after /boot //ram2kDev.endBlock = 127; // Last block in 16MB ram2kDev.endBlock = nandemul2k_GetNumberOfBlocks() - 1; // Last block in 512MB ram2kDev.isYaffs2 = 1; ram2kDev.nShortOpCaches = 10; // Use caches ram2kDev.genericDevice = (void *) 3; // Used to identify the device in fstat. ram2kDev.writeChunkWithTagsToNAND = nandemul2k_WriteChunkWithTagsToNAND; ram2kDev.readChunkWithTagsFromNAND = nandemul2k_ReadChunkWithTagsFromNAND; ram2kDev.eraseBlockInNAND = nandemul2k_EraseBlockInNAND; ram2kDev.initialiseNAND = nandemul2k_InitialiseNAND; ram2kDev.markNANDBlockBad = nandemul2k_MarkNANDBlockBad; ram2kDev.queryNANDBlock = nandemul2k_QueryNANDBlock; yaffs_initialise(yaffsfs_config); return 0;}void SetCheckpointReservedBlocks(int n){ flashDev.nCheckpointReservedBlocks = n;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -