makefile.in

multi-tabed terminal based on rxvt

# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# All portions of code are copyright by their respective author/s.
#   Copyright (c) 2006	   Gautam Iyer <[e-mail]>
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc., 675 Mass
# Ave, Cambridge, MA 02139, USA.

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = share
DIST_COMMON = $(dist_conf_DATA) $(dist_etc_DATA) $(dist_pixmap_DATA) \
	$(dist_scripts_DATA) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(confdir)" "$(DESTDIR)$(etcdir)" \
	"$(DESTDIR)$(pixmapdir)" "$(DESTDIR)$(scriptsdir)"
dist_confDATA_INSTALL = $(INSTALL_DATA)
dist_etcDATA_INSTALL = $(INSTALL_DATA)
dist_pixmapDATA_INSTALL = $(INSTALL_DATA)
dist_scriptsDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_conf_DATA) $(dist_etc_DATA) $(dist_pixmap_DATA) \
	$(dist_scripts_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XMKMF = @XMKMF@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = $(datadir)/doc/$(PACKAGE_NAME)
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
dist_conf_DATA = default.menu submenus.menu mrxvtrc mrxvtrc.sample
confdir = $(sysconfdir)/$(PACKAGE_NAME)

# Distribute scripts with documentation. Package maintaners can clean them up
# and install them if necessary.
dist_scripts_DATA = scripts/mrxvt.vbs scripts/mrxvtset.pl scripts/settitle.c
scriptsdir = $(docdir)/scripts
dist_pixmap_DATA = pixmaps/mrxvt-csh.png	\
		    pixmaps/mrxvt-root.png	\
		    pixmaps/mrxvt.png		\
		    pixmaps/mrxvt-csh.xpm	\
		    pixmaps/mrxvt-root.xpm	\
		    pixmaps/mrxvt.xpm

pixmapdir = $(datadir)/pixmaps

# builds_DATA =	builds/mrxvt.SlackBuild		\
#		builds/mrxvt.slack-desc		\
#		builds/mrxvt.spec
# buildsdir = $(pkgdatadir)/builds
dist_etc_DATA = etc/XTerm.ad		\
		    etc/mrxvt.terminfo		\
		    etc/rxvt.termcap		\
      		    etc/rxvt.terminfo

etcdir = $(docdir)/etc
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  share/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  share/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
install-dist_confDATA: $(dist_conf_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(confdir)" || $(MKDIR_P) "$(DESTDIR)$(confdir)"
	@list='$(dist_conf_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_confDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(confdir)/$$f'"; \
	  $(dist_confDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(confdir)/$$f"; \
	done

uninstall-dist_confDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_conf_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(confdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(confdir)/$$f"; \
	done
install-dist_etcDATA: $(dist_etc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(etcdir)" || $(MKDIR_P) "$(DESTDIR)$(etcdir)"
	@list='$(dist_etc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_etcDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(etcdir)/$$f'"; \
	  $(dist_etcDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(etcdir)/$$f"; \
	done

uninstall-dist_etcDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_etc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(etcdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(etcdir)/$$f"; \
	done
install-dist_pixmapDATA: $(dist_pixmap_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pixmapdir)" || $(MKDIR_P) "$(DESTDIR)$(pixmapdir)"
	@list='$(dist_pixmap_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_pixmapDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pixmapdir)/$$f'"; \
	  $(dist_pixmapDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pixmapdir)/$$f"; \
	done

uninstall-dist_pixmapDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pixmap_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pixmapdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pixmapdir)/$$f"; \
	done
install-dist_scriptsDATA: $(dist_scripts_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(scriptsdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptsdir)"
	@list='$(dist_scripts_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_scriptsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(scriptsdir)/$$f'"; \
	  $(dist_scriptsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(scriptsdir)/$$f"; \
	done

uninstall-dist_scriptsDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_scripts_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(scriptsdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(scriptsdir)/$$f"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(confdir)" "$(DESTDIR)$(etcdir)" "$(DESTDIR)$(pixmapdir)" "$(DESTDIR)$(scriptsdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-dist_confDATA install-dist_etcDATA \
	install-dist_pixmapDATA install-dist_scriptsDATA

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_confDATA uninstall-dist_etcDATA \
	uninstall-dist_pixmapDATA uninstall-dist_scriptsDATA

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-dist_confDATA install-dist_etcDATA \
	install-dist_pixmapDATA install-dist_scriptsDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-dist_confDATA uninstall-dist_etcDATA \
	uninstall-dist_pixmapDATA uninstall-dist_scriptsDATA

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: