⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 inffast.pas

📁 一个类似indy控件包中的idhttp的控件
💻 PAS
字号:
Unit InfFast;

{
  inffast.h and
  inffast.c -- process literals and length/distance pairs fast
  Copyright (C) 1995-1998 Mark Adler

  Pascal tranlastion
  Copyright (C) 1998 by Jacques Nomssi Nzali
  For conditions of distribution and use, see copyright notice in readme.txt
}


interface

{$I zconf.inc}

uses
  zutil, zlib7;

function inflate_fast( bl : uInt;
                       bd : uInt;
                       tl : pInflate_huft;
                       td : pInflate_huft;
                      var s : inflate_blocks_state;
                      var z : z_stream) : int;


implementation

uses
  infutil;


{ Called with number of bytes left to write in window at least 258
  (the maximum string length) and number of input bytes available
  at least ten.  The ten bytes are six bytes for the longest length/
  distance pair plus four bytes for overloading the bit buffer. }

function inflate_fast( bl : uInt;
                       bd : uInt;
                       tl : pInflate_huft;
                       td : pInflate_huft;
                      var s : inflate_blocks_state;
                      var z : z_stream) : int;

var
  t : pInflate_huft;      { temporary pointer }
  e : uInt;               { extra bits or operation }
  b : uLong;              { bit buffer }
  k : uInt;               { bits in bit buffer }
  p : pBytef;             { input data pointer }
  n : uInt;               { bytes available there }
  q : pBytef;             { output window write pointer }
  m : uInt;               { bytes to end of window or read pointer }
  ml : uInt;              { mask for literal/length tree }
  md : uInt;              { mask for distance tree }
  c : uInt;               { bytes to copy }
  d : uInt;               { distance back to copy from }
  r : pBytef;             { copy source pointer }
begin
  { load input, output, bit values (macro LOAD) }
  p := z.next_in;
  n := z.avail_in;
  b := s.bitb;
  k := s.bitk;
  q := s.write;
  if ptr2int(q) < ptr2int(s.read) then
    m := uInt(ptr2int(s.read)-ptr2int(q)-1)
  else
    m := uInt(ptr2int(s.zend)-ptr2int(q));

  { initialize masks }
  ml := inflate_mask[bl];
  md := inflate_mask[bd];

  { do until not enough input or output space for fast loop }
  repeat                      { assume called with (m >= 258) and (n >= 10) }
    { get literal/length code }
    {GRABBITS(20);}             { max bits for literal/length code }
    while (k < 20) do
    begin
      Dec(n);
      b := b or (uLong(p^) shl k);
      Inc(p);
      Inc(k, 8);
    end;

    t := @(huft_ptr(tl)^[uInt(b) and ml]);

    e := t^.exop;
    if (e = 0) then
    begin
      {DUMPBITS(t^.bits);}
      b := b shr t^.bits;
      Dec(k, t^.bits);
      q^ := Byte(t^.base);
      Inc(q);
      Dec(m);
      continue;
    end;
    repeat
      {DUMPBITS(t^.bits);}
      b := b shr t^.bits;
      Dec(k, t^.bits);

      if (e and 16 <> 0) then
      begin
        { get extra bits for length }
        e := e and 15;
        c := t^.base + (uInt(b) and inflate_mask[e]);
        {DUMPBITS(e);}
        b := b shr e;
        Dec(k, e);
        { decode distance base of block to copy }
        {GRABBITS(15);}           { max bits for distance code }
        while (k < 15) do
        begin
          Dec(n);
          b := b or (uLong(p^) shl k);
          Inc(p);
          Inc(k, 8);
        end;

        t := @huft_ptr(td)^[uInt(b) and md];
        e := t^.exop;
        repeat
          {DUMPBITS(t^.bits);}
          b := b shr t^.bits;
          Dec(k, t^.bits);

          if (e and 16 <> 0) then
          begin
            { get extra bits to add to distance base }
            e := e and 15;
            {GRABBITS(e);}         { get extra bits (up to 13) }
            while (k < e) do
            begin
              Dec(n);
              b := b or (uLong(p^) shl k);
              Inc(p);
              Inc(k, 8);
            end;

            d := t^.base + (uInt(b) and inflate_mask[e]);
            {DUMPBITS(e);}
            b := b shr e;
            Dec(k, e);

            { do the copy }
            Dec(m, c);
            if (uInt(ptr2int(q) - ptr2int(s.window)) >= d) then     { offset before dest }
            begin                                  {  just copy }
              r := q;
              Dec(r, d);
              q^ := r^;  Inc(q); Inc(r); Dec(c); { minimum count is three, }
              q^ := r^;  Inc(q); Inc(r); Dec(c); { so unroll loop a little }
            end
            else                        { else offset after destination }
            begin
              e := d - uInt(ptr2int(q) - ptr2int(s.window)); { bytes from offset to end }
              r := s.zend;
              Dec(r, e);                  { pointer to offset }
              if (c > e) then             { if source crosses, }
              begin
                Dec(c, e);                { copy to end of window }
                repeat
                  q^ := r^;
                  Inc(q);
                  Inc(r);
                  Dec(e);
                until (e=0);
                r := s.window;           { copy rest from start of window }
              end;
            end;
            repeat                       { copy all or what's left }
              q^ := r^;
              Inc(q);
              Inc(r);
              Dec(c);
            until (c = 0);
            break;
          end
          else
            if (e and 64 = 0) then
            begin
              Inc(t, t^.base + (uInt(b) and inflate_mask[e]));
              e := t^.exop;
            end
          else
          begin
            z.msg := 'invalid distance code';
            {UNGRAB}
            c := z.avail_in-n;
            if (k shr 3) < c then
              c := k shr 3;
            Inc(n, c);
            Dec(p, c);
            Dec(k, c shl 3);
            {UPDATE}
            s.bitb := b;
            s.bitk := k;
            z.avail_in := n;
            Inc(z.total_in, ptr2int(p)-ptr2int(z.next_in));
            z.next_in := p;
            s.write := q;

            inflate_fast := Z_DATA_ERROR;
            exit;
          end;
        until FALSE;
        break;
      end;
      if (e and 64 = 0) then
      begin
         {t += t->base;
          e = (t += ((uInt)b & inflate_mask[e]))->exop;}

        Inc(t, t^.base + (uInt(b) and inflate_mask[e]));
        e := t^.exop;
        if (e = 0) then
        begin
          {DUMPBITS(t^.bits);}
          b := b shr t^.bits;
          Dec(k, t^.bits);

          q^ := Byte(t^.base);
          Inc(q);
          Dec(m);
          break;
        end;
      end
      else
        if (e and 32 <> 0) then
        begin
          {UNGRAB}
          c := z.avail_in-n;
          if (k shr 3) < c then
            c := k shr 3;
          Inc(n, c);
          Dec(p, c);
          Dec(k, c shl 3);
          {UPDATE}
          s.bitb := b;
          s.bitk := k;
          z.avail_in := n;
          Inc(z.total_in, ptr2int(p)-ptr2int(z.next_in));
          z.next_in := p;
          s.write := q;
          inflate_fast := Z_STREAM_END;
          exit;
        end
        else
        begin
          z.msg := 'invalid literal/length code';
          {UNGRAB}
          c := z.avail_in-n;
          if (k shr 3) < c then
            c := k shr 3;
          Inc(n, c);
          Dec(p, c);
          Dec(k, c shl 3);
          {UPDATE}
          s.bitb := b;
          s.bitk := k;
          z.avail_in := n;
          Inc(z.total_in, ptr2int(p)-ptr2int(z.next_in));
          z.next_in := p;
          s.write := q;
          inflate_fast := Z_DATA_ERROR;
          exit;
        end;
    until FALSE;
  until (m < 258) or (n < 10);

  { not enough input or output--restore pointers and return }
  {UNGRAB}
  c := z.avail_in-n;
  if (k shr 3) < c then
    c := k shr 3;
  Inc(n, c);
  Dec(p, c);
  Dec(k, c shl 3);
  {UPDATE}
  s.bitb := b;
  s.bitk := k;
  z.avail_in := n;
  Inc(z.total_in, ptr2int(p)-ptr2int(z.next_in));
  z.next_in := p;
  s.write := q;
  inflate_fast := Z_OK;
end;

end.

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -