⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 socrates.c

📁 uboot详细解读可用启动引导LINUX2.6内核
💻 C
字号:
/* * (C) Copyright 2008 * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. * * Copyright 2004 Freescale Semiconductor. * (C) Copyright 2002,2003, Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <pci.h>#include <asm/processor.h>#include <asm/immap_85xx.h>#include <ioports.h>#include <flash.h>#include <libfdt.h>#include <fdt_support.h>#include <asm/io.h>#if defined(CFG_FPGA_BASE)#include "upm_table.h"#endifDECLARE_GLOBAL_DATA_PTR;extern flash_info_t flash_info[];	/* FLASH chips info */void local_bus_init (void);ulong flash_get_size (ulong base, int banknum);int checkboard (void){	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);	char *src;	int f;	char *s = getenv("serial#");	puts("Board: Socrates");	if (s != NULL) {		puts(", serial# ");		puts(s);	}	putc('\n');#ifdef CONFIG_PCI	/* Check the PCI_clk sel bit */	if (in_be32(&gur->porpllsr) & (1<<15)) {		src = "SYSCLK";		f = CONFIG_SYS_CLK_FREQ;	} else {		src = "PCI_CLK";		f = CONFIG_PCI_CLK_FREQ;	}	printf ("PCI1:  32 bit, %d MHz (%s)\n",	f/1000000, src);#else	printf ("PCI1:  disabled\n");#endif	/*	 * Initialize local bus.	 */	local_bus_init ();#if defined(CFG_FPGA_BASE)	/* Init UPMA for FPGA access */	upmconfig(UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int));#endif	return 0;}int misc_init_r (void){	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);	/*	 * Adjust flash start and offset to detected values	 */	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;	gd->bd->bi_flashoffset = 0;	/*	 * Check if boot FLASH isn't max size	 */	if (gd->bd->bi_flashsize < (0 - CFG_FLASH0)) {		memctl->or0 = gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff);		memctl->br0 = gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff);		/*		 * Re-check to get correct base address		 */		flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);	}	/*	 * Check if only one FLASH bank is available	 */	if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {		memctl->or1 = 0;		memctl->br1 = 0;		/*		 * Re-do flash protection upon new addresses		 */		flash_protect (FLAG_PROTECT_CLEAR,			       gd->bd->bi_flashstart, 0xffffffff,			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);		/* Monitor protection ON by default */		flash_protect (FLAG_PROTECT_SET,			       CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);		/* Environment protection ON by default */		flash_protect (FLAG_PROTECT_SET,			       CFG_ENV_ADDR,			       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);		/* Redundant environment protection ON by default */		flash_protect (FLAG_PROTECT_SET,			       CFG_ENV_ADDR_REDUND,			       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);	}	return 0;}/* * Initialize Local Bus */void local_bus_init (void){	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */	ecm->eedr = 0xffffffff;		/* Clear ecm errors */	ecm->eeer = 0xffffffff;		/* Enable ecm errors */}#if defined(CONFIG_PCI)/* * Initialize PCI Devices, report devices found. */#ifndef CONFIG_PCI_PNPstatic struct pci_config_table pci_mpc85xxads_config_table[] = {	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,	 PCI_IDSEL_NUMBER, PCI_ANY_ID,	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,				     PCI_ENET0_MEMADDR,				     PCI_COMMAND_MEMORY |				     PCI_COMMAND_MASTER}},	{}};#endifstatic struct pci_controller hose = {#ifndef CONFIG_PCI_PNP	config_table:pci_mpc85xxads_config_table,#endif};#endif /* CONFIG_PCI */void pci_init_board (void){#ifdef CONFIG_PCI	pci_mpc85xx_init (&hose);#endif /* CONFIG_PCI */}#ifdef CONFIG_BOARD_EARLY_INIT_Rint board_early_init_r (void){#ifdef CONFIG_PS2MULT	ps2mult_early_init();#endif /* CONFIG_PS2MULT */	return (0);}#endif /* CONFIG_BOARD_EARLY_INIT_R */#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)voidft_board_setup(void *blob, bd_t *bd){	u32 val[4];	int rc;	ft_cpu_setup(blob, bd);	/* Fixup NOR mapping */	val[0] = 0;				/* chip select number */	val[1] = 0;				/* always 0 */	val[2] = gd->bd->bi_flashstart;	val[3] = gd->bd->bi_flashsize;	rc = fdt_find_and_setprop(blob, "/localbus", "ranges",				  val, sizeof(val), 1);	if (rc)		printf("Unable to update property NOR mapping, err=%s\n",		       fdt_strerror(rc));#if defined (CFG_FPGA_BASE)	memset(val, 0, sizeof(val));	val[0] = CFG_FPGA_BASE;	rc = fdt_find_and_setprop(blob, "/localbus/fpga", "virtual-reg",				  val, sizeof(val), 1);	if (rc)		printf("Unable to update property \"fpga\", err=%s\n",		       fdt_strerror(rc));#endif}#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -