📄 pconst.cdg
字号:
#define RRGRR_SUSPEND_DCCH_REQ (0x2d0d)
#define RRGRR_SUSPEND_DCCH_CNF (0x6d10)
#define RRGRR_RECONNECT_DCCH_REQ (0x2d0e)
#define RRGRR_RECONNECT_DCCH_CNF (0x6d11)
#define RRGRR_RESUMED_TBF_REQ (0x2d01)
#define RRGRR_RESUMED_TBF_CNF (0x6d07)
#define RRGRR_STOP_DCCH_IND (0x6d12)
#define RRGRR_CR_IND (0x6d13)
#define RRGRR_NCELL_SYNC_REQ (0x2d0f)
#define RRGRR_NCELL_SYNC_IND (0x6d15)
#define RRGRR_SYNC_REQ (0x2d10)
#define RRGRR_SYNC_IND (0x6d16)
#define RRGRR_STOP_ALL_ACTIVITIES (0x2d11)
#define RRGRR_UPDATE_BA_REQ (0x2d12)
#define RRGRR_MEAS_REP_REQ (0x2d13)
#define RRGRR_MEAS_REP_CNF (0x6d17)
#define RRGRR_TBF_ESTABLISHED_REQ (0x2d14)
#define RRGRR_CR_RSP (0x2d15)
#define RRGRR_MS_ID_IND (0x6d19)
#define RRGRR_EXT_MEAS_REQ (0x2d16)
#define RRGRR_EXT_MEAS_CNF (0x6d0a)
#define RRGRR_EXT_MEAS_STOP_REQ (0x2d17)
#define RRGRR_STOP_ALL_ACTIVITIES_CNF (0x6d18)
#define RRGRR_STOP_TASK_REQ (0x2d18)
#define RRGRR_STOP_TASK_CNF (0x6d09)
#define RRGRR_START_TASK_REQ (0x2d19)
#define RRGRR_START_TASK_CNF (0x6d1a)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_RRGRR (0x1a) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_RRGRR (0x304) /* max length of data part in primitive */
#define CCDSAP_RRGRR (0x2d)
/*
* Constants for the Service access point MPHP
*/
#define MPHP_SCELL_PBCCH_REQ (0x21c)
#define MPHP_DATA_IND (0x228)
#define MPHP_SCELL_PBCCH_STOP_REQ (0x21d)
#define MPHP_SCELL_PBCCH_STOP_CON (0x21e)
#define MPHP_START_PCCCH_REQ (0x219)
#define MPHP_STOP_PCCCH_REQ (0x21a)
#define MPHP_STOP_PCCCH_CON (0x21b)
#define MPHP_CR_MEAS_REQ (0x21f)
#define MPHP_CR_MEAS_IND (0x229)
#define MPHP_CR_MEAS_STOP_REQ (0x220)
#define MPHP_CR_MEAS_STOP_CON (0x221)
#define MPHP_INT_MEAS_REQ (0x222)
#define MPHP_INT_MEAS_IND (0x22a)
#define MPHP_INT_MEAS_STOP_REQ (0x223)
#define MPHP_INT_MEAS_STOP_CON (0x224)
#define MPHP_NCELL_PBCCH_REQ (0x225)
#define MPHP_NCELL_PBCCH_IND (0x22c)
#define MPHP_NCELL_PBCCH_STOP_REQ (0x226)
#define MPHP_NCELL_PBCCH_STOP_CON (0x227)
#define MPHP_RA_REQ (0x212)
#define MPHP_RA_CON (0x213)
#define MPHP_RA_STOP_REQ (0x214)
#define MPHP_RA_STOP_CON (0x215)
#define MPHP_POLLING_RESPONSE_REQ (0x216)
#define MPHP_POLLING_IND (0x217)
#define MPHP_ASSIGNMENT_REQ (0x206)
#define MPHP_ASSIGNMENT_CON (0x207)
#define MPHP_REPEAT_UL_FIXED_ALLOC_REQ (0x20a)
#define MPHP_REPEAT_UL_FIXED_ALLOC_CON (0x20b)
#define MPHP_SINGLE_BLOCK_REQ (0x201)
#define MPHP_SINGLE_BLOCK_CON (0x202)
#define MPHP_STOP_SINGLE_BLOCK_REQ (0x203)
#define MPHP_STOP_SINGLE_BLOCK_CON (0x204)
#define MPHP_TBF_RELEASE_REQ (0x208)
#define MPHP_TBF_RELEASE_CON (0x209)
#define MPHP_PDCH_RELEASE_REQ (0x20c)
#define MPHP_PDCH_RELEASE_CON (0x20d)
#define MPHP_TIMING_ADVANCE_REQ (0x20e)
#define MPHP_TIMING_ADVANCE_CON (0x20f)
#define MPHP_UPDATE_PSI_PARAM_REQ (0x210)
#define MPHP_UPDATE_PSI_PARAM_CON (0x211)
#define MPHP_TCR_MEAS_REQ (0x22d)
#define MPHP_TCR_MEAS_IND (0x22e)
#define MPHP_TINT_MEAS_IND (0x22b)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_MPHP (0x2e) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_MPHP (0x144) /* max length of data part in primitive */
#define CCDSAP_MPHP (0x2)
/*
* Constants for the Service access point MAC
*/
#define MAC_DATA_REQ (0x3200)
#define MAC_DATA_IND (0x7200)
#define MAC_READY_IND (0x7201)
#define MAC_POLL_REQ (0x3201)
#define MAC_PWR_CTRL_IND (0x7202)
#define MAC_PWR_CTRL_REQ (0x3202)
#define MAC_TA_VALUEL_IND (0x7203)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_MAC (0x3) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_MAC (0x48) /* max length of data part in primitive */
#define CCDSAP_MAC (0x32)
/*
* Constants for the Service access point GSIM
*/
#define GSIM_UPDATE_REQ (0x2900)
#define GSIM_STORE_KC_REQ (0x2901)
#define GSIM_INSERTED_IND (0x6900)
#define GSIM_REMOVED_IND (0x6901)
#define GSIM_AUTHENTICATION_REQ (0x2902)
#define GSIM_AUTHENTICATION_CNF (0x6902)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_GSIM (0x2) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_GSIM (0x2c) /* max length of data part in primitive */
#define CCDSAP_GSIM (0x29)
/*
* Constants for the Service access point SMREG
*/
#define SMREG_PDP_ACTIVATE_REQ (0x2600)
#define SMREG_PDP_ACTIVATE_CNF (0x6600)
#define SMREG_PDP_ACTIVATE_REJ (0x6601)
#define SMREG_PDP_ACTIVATE_IND (0x6602)
#define SMREG_PDP_DEACTIVATE_REQ (0x2601)
#define SMREG_PDP_DEACTIVATE_CNF (0x6603)
#define SMREG_PDP_DEACTIVATE_IND (0x6604)
#define SMREG_PDP_MODIFY_IND (0x6605)
#define SMREG_PDP_ACTIVATE_RES (0x2602)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_SMREG (0x5) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_SMREG (0xa8) /* max length of data part in primitive */
#define CCDSAP_SMREG (0x26)
/*
* Constants for the Service access point SN
*/
#define SN_DATA_REQ (0x2800)
#define SN_DATA_IND (0x6800)
#define SN_UNITDATA_REQ (0x2801)
#define SN_UNITDATA_IND (0x6801)
#define SN_XID_REQ (0x2802)
#define SN_XID_IND (0x6802)
#define SN_XID_RES (0x2803)
#define SN_XID_CNF (0x6803)
#define SN_READY_IND (0x6804)
#define SN_UNITREADY_IND (0x6805)
#define SN_GETDATA_REQ (0x2804)
#define SN_GETUNITDATA_REQ (0x2805)
#define SN_DATA_REQ_TEST (0x2806)
#define SN_DATA_IND_TEST (0x6806)
#define SN_UNITDATA_REQ_TEST (0x2807)
#define SN_UNITDATA_IND_TEST (0x6807)
#define SN_MODIFICATION_IND (0x6808)
#define SN_COUNT_REQ (0x2808)
#define SN_COUNT_CNF (0x6809)
#define SN_SWITCH_REQ (0x2809)
#define SN_SWITCH_CNF (0x680a)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_SN (0xa) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_SN (0x18) /* max length of data part in primitive */
#define CCDSAP_SN (0x28)
/*
* Constants for the Service access point SNSM
*/
#define SNSM_ACTIVATE_IND (0x6700)
#define SNSM_ACTIVATE_RES (0x2700)
#define SNSM_DEACTIVATE_IND (0x6701)
#define SNSM_DEACTIVATE_RES (0x2701)
#define SNSM_MODIFY_IND (0x6702)
#define SNSM_MODIFY_RES (0x2702)
#define SNSM_STATUS_REQ (0x2703)
#define SNSM_SEQUENCE_IND (0x6703)
#define SNSM_SEQUENCE_RES (0x2704)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_SNSM (0x4) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_SNSM (0x24) /* max length of data part in primitive */
#define CCDSAP_SNSM (0x27)
/*
* Constants for the Service access point PPP
*/
#define PPP_ESTABLISH_REQ (0x7500)
#define PPP_ESTABLISH_CNF (0x3500)
#define PPP_TERMINATE_REQ (0x7501)
#define PPP_TERMINATE_IND (0x3501)
#define PPP_PDP_ACTIVATE_IND (0x3502)
#define PPP_PDP_ACTIVATE_RES (0x7502)
#define PPP_PDP_ACTIVATE_REJ (0x7503)
#define PPP_MODIFICATION_REQ (0x7504)
#define PPP_MODIFICATION_CNF (0x3503)
#define PPP_DTI_CONNECTED_IND (0x3504)
#define NEW_POWER_STATUS (0x7505)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_PPP (0x5) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_PPP (0x70) /* max length of data part in primitive */
#define CCDSAP_PPP (0x35)
/*
* Constants for the Service access point TB
*/
#define TB_MEAS_IND (0x1800)
#define TB_RXLEV_SC_REQ (0x5800)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_TB (0x0) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_TB (0x108) /* max length of data part in primitive */
#define CCDSAP_TB (0x18)
/*
* Constants for the Service access point PKT
*/
#define PKT_CONNECT_IND (0x80004045)
#define PKT_CONNECT_RES (0x80000045)
#define PKT_CONNECT_REJ (0x80010045)
#define PKT_DISCONNECT_IND (0x80014045)
#define PKT_DTI_OPEN_REQ (0x80020045)
#define PKT_DTI_OPEN_CNF (0x80024045)
#define PKT_MODIFY_REQ (0x80030045)
#define PKT_MODIFY_CNF (0x80034045)
#define PKT_DTI_CLOSE_REQ (0x80040045)
#define PKT_DTI_CLOSE_CNF (0x80044045)
#define PKT_DTI_CLOSE_IND (0x80054045)
#define PKT_SIG_CLEAR_IND (0x80050045)
#define PKT_SIG_FLUSH_IND (0x80060045)
#define PKT_SIG_READ_IND (0x80070045)
#define PKT_SIG_WRITE_IND (0x80080045)
#define PKT_SIG_CONNECT_IND (0x80090045)
#define PKT_SIG_DISCONNECT_IND (0x800a0045)
#define PKT_DIO_SIGNAL_IND (0x80200045)
#define PKT_DIO_INIT_REQ (0x80204045)
#define PKT_DIO_INIT_CNF (0x80210045)
#define PKT_DIO_EXIT_REQ (0x80214045)
#define PKT_DIO_READ_REQ (0x80224045)
#define PKT_DIO_READ_CNF (0x80220045)
#define PKT_DIO_GETDATA_REQ (0x80234045)
#define PKT_DIO_GETDATA_CNF (0x80230045)
#define PKT_DIO_WRITE_REQ (0x80244045)
#define PKT_DIO_WRITE_CNF (0x80240045)
#define PKT_DIO_GETBUFFER_REQ (0x80254045)
#define PKT_DIO_GETBUFFER_CNF (0x80250045)
#define PKT_DIO_CLEAR_REQ (0x80264045)
#define PKT_DIO_CLEAR_CNF (0x80260045)
#define PKT_DIO_FLUSH_REQ (0x80274045)
#define PKT_DIO_FLUSH_CNF (0x80270045)
#define PKT_DIO_SETSIGNAL_REQ (0x80284045)
#define PKT_DIO_SETSIGNAL_CNF (0x80280045)
#define PKT_DIO_RESETSIGNAL_REQ (0x80294045)
#define PKT_DIO_RESETSIGNAL_CNF (0x80290045)
#define PKT_DIO_GETCAP_REQ (0x802a4045)
#define PKT_DIO_GETCAP_CNF (0x802a0045)
#define PKT_DIO_SETCONFIG_REQ (0x802b4045)
#define PKT_DIO_SETCONFIG_CNF (0x802b0045)
#define PKT_DIO_GETCONFIG_REQ (0x802c4045)
#define PKT_DIO_GETCONFIG_CNF (0x802c0045)
#define PKT_DIO_CLOSEDEVICE_REQ (0x802d4045)
#define PKT_DIO_CLOSEDEVICE_CNF (0x802d0045)
/*
* calculated constants
*/
#define MAX_PRIMITIVE_ID_PKT (0x2d) /* highest value for prim identifier */
#define MAX_PSTRUCT_LEN_PKT (0x28) /* max length of data part in primitive */
#define CCDSAP_PKT (0x45)
/*
* global constants
*/
#undef CCD_SYMBOLS
#define MAX_SAP_NUM (0x45) /* number of service access points */
#define MAX_PRIMITIVE_ID (0x7a) /* maximum of all used prim opcodes */
#define MAX_PSTRUCT_LEN (0x1b00) /* max size of all primitive structures */
#end
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -