📄 m_t30.val
字号:
/*
+--------------------------------------------------------------------------+
| PROJEKT : PROTOCOL STACK |
| FILE : M_T30.val |
| SOURCE : "Z:\condat\gsm\condat\ms\dfile\msg\T30.mdf" |
| LastModified : "February 04, 2000" |
| IdAndVersion : "8411.620.98.101" |
| SrcFileTime : "Thu Aug 14 00:00:00 2003" |
| Generated by CCDGEN_2.2.4 on Thu Aug 14 16:45:17 2003 |
| !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! |
+--------------------------------------------------------------------------+
*/
/* PRAGMAS
* PREFIX : NONE
* COMPATIBILITY_DEFINES : NO (require PREFIX)
* ALWAYS_ENUM_IN_VAL_FILE: NO
* ENABLE_GROUP: NO
*/
#ifndef M_T30_VAL
#define M_T30_VAL
#define CDG_ENTER__M_T30_VAL
#define CDG_ENTER__FILENAME _M_T30_VAL
#define CDG_ENTER__M_T30_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__M_T30_VAL__LAST_MODIFIED _February_04_2000
#define CDG_ENTER__M_T30_VAL__ID_AND_VERSION _8411_620_98_101
#define CDG_ENTER__M_T30_VAL__SRC_FILE_TIME _Thu_Aug_14_00_00_00_2003
#include "CDG_ENTER.h"
#undef CDG_ENTER__M_T30_VAL
#undef CDG_ENTER__FILENAME
/*
* Value constants for v8
*/
#define v8_not_avail (0x0) /* V.8 is not available */
#define v8_avail (0x1) /* V.8 is available */
/*
* Value constants for n_byte
*/
#define NB_256_BYTES (0x0) /* 256 octets preferred in ECM */
#define NB_64_BYTES (0x1) /* 64 octets preferred in ECM */
/*
* Value constants for ready_tx_fax
*/
#define RTF_NO_TX_RDY (0x0) /* not ready to transmit a facsimile document */
#define RTF_TX_RDY (0x1) /* ready to transmit a facsimile document */
/*
* Value constants for rec_fax_op
*/
#define RFO_NO_RX_RDY (0x0) /* not ready to receive a facsimile document */
#define RFO_RX_RDY (0x1) /* ready to receive a facsimile document */
/*
* Value constants for data_sig_rate
*/
#define DSR_2400_V27 (0x0) /* signalling rate 2400 bps V.27 ter */
#define DSR_4800_V27 (0x4) /* signalling rate 4800 bps V.27 ter */
#define DSR_7200_V29 (0xc) /* signalling rate 7200 bps V.29 */
#define DSR_7200_V17 (0xd) /* signalling rate 7200 bps V.17 */
#define DSR_9600_V29 (0x8) /* signalling rate 9600 bps V.29 */
#define DSR_9600_V17 (0x9) /* signalling rate 9600 bps V.17 */
#define DSR_12000_V17 (0x5) /* signalling rate 12000 bps V.17 */
#define DSR_14000_V17 (0x1) /* signalling rate 14400 bps V.19 */
#define DATA_SIG_RATE_GNOLZ_DEF (0x0) /* undefined signalling rate */
/*
* Value constants for R8_lines_pels
*/
#define R8LP_R8_ONLY (0x0) /* vertical resolution is specified by R8 only */
#define R8LP_R8_EXTENDED (0x1) /* vertical resolution is specified not only by R8 */
/*
* Value constants for two_dim_coding
*/
#define TDC_NO_2D_CODING (0x0) /* no 2D T.4 coding */
#define TDC_2D_CODING (0x1) /* 2D T.4 coding */
/*
* Value constants for rec_width
*/
#define RW_WIDTH_215_MM (0x0) /* Scan line length of 215 mm */
#define RW_WIDTH_303_MM (0x1) /* Scan line length of 215, 255 and 303 mm */
#define RW_WIDTH_255_MM (0x2) /* Scan line length of 215 and 255 mm */
#define RW_WIDTH_INVALID (0x3) /* Invalid scan line length */
/*
* Value constants for max_rec_len
*/
#define MRL_A4 (0x0) /* Maximum recording length A4 (297 mm) */
#define MRL_UNLIMITED (0x1) /* Unlimited recording length */
#define MRL_B4 (0x2) /* Maximum recording length B4 (364 mm) */
#define MRL_INVALID (0x3) /* Invalid recording length */
/*
* Value constants for min_scan_time
*/
#define MST_20_MS (0x0) /* 20 ms at 3.85 1/mm: T7.7 = T3.85 */
#define MST_40_MS (0x1) /* 40 ms at 3.85 1/mm: T7.7 = T3.85 */
#define MST_10_MS (0x2) /* 10 ms at 3.85 1/mm: T7.7 = T3.85 */
#define MST_5_MS (0x3) /* 5 ms at 3.85 1/mm: T7.7 = T3.85 */
#define MST_10_MS_HALF (0x4) /* 10 ms at 3.85 1/mm: T7.7 = 1/2 T3.85 */
#define MST_20_MS_HALF (0x5) /* 20 ms at 3.85 1/mm: T7.7 = 1/2 T3.85 */
#define MST_40_MS_HALF (0x6) /* 40 ms at 3.85 1/mm: T7.7 = 1/2 T3.85 */
#define MST_0_MS (0x7) /* 0 ms at 3.85 1/mm: T7.7 = T3.85 */
/*
* Value constants for uncomp_mode
*/
#define UCM_COMPRESSED (0x0) /* T.4 data (can be send)/(are) in compressed mode */
#define UCM_UNCOMPRESSED (0x1) /* T.4 data (can be send)/(are) in uncompressed mode */
/*
* Value constants for err_corr_mode
*/
#define ECM_OFF (0x0) /* Error correction mode is not possible/off */
#define ECM_ON (0x1) /* Error correction mode is possible/on */
/*
* Value constants for t6_coding
*/
#define T6_CODING_OFF (0x0) /* T.6 coding is not possible/off */
#define T6_CODING_ON (0x1) /* T.6 coding is possible/on */
/*
* Value constants for R8_lines
*/
#define R8_LINES_OFF (0x0) /* R8 x 15.4 lines/mm is not possible/off */
#define R8_LINES_ON (0x1) /* R8 x 15.4 lines/mm is possible/on */
/*
* Value constants for r_300_pels
*/
#define R300_PELS_OFF (0x0) /* Res 300 x 300 pels /25.4 mm is not possible/off */
#define R300_PELS_ON (0x1) /* Res 300 x 300 pels /25.4 mm is possible/on */
/*
* Value constants for R16_lines_pels
*/
#define R16_LINES_PELS_OFF (0x0) /* R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm mode is not possible/off */
#define R16_LINES_PELS_ON (0x1) /* R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm mode is possible/on */
/*
* Value constants for i_res_pref
*/
#define IRP_NO_INCH_BASED (0x0) /* Inch-based resolution not preferred */
#define IRP_INCH_BASED (0x1) /* Inch-based resolution preferred */
/*
* Value constants for m_res_pref
*/
#define IRP_NO_METRIC_BASED (0x0) /* Metric-based resolution not preferred */
#define IRP_METRIC_BASED (0x1) /* Metric-based resolution preferred */
/*
* Value constants for min_scan_time_hr
*/
#define MST_T154_EQ_T77 (0x0) /* T15.4 = T7.7 */
#define MST_T154_EQ_HALF_T77 (0x1) /* T15.4 = 0.5 x T7.7 */
/*
* Value constants for sel_polling
*/
#define SEP_NO_POLLING (0x0) /* Selective polling not possible */
#define SEP_POLLING (0x1) /* Selective polling possible */
/*
* Value constants for subaddr
*/
#define SA_NO_SUBADDRESSING (0x0) /* Sub-addressing is not possible/intended */
#define SA_SUBADDRESSNIG (0x1) /* Sub-addressing is possible/intended */
/*
* Value constants for password
*/
#define PW_NO_PASSWORD (0x0) /* Password checking is not possible/intended */
#define PW_PASSWORD (0x1) /* Password checking is possible/intended */
/*
* Value constants for ready_tx_doc
*/
#define RTD_TX_READY (0x0) /* Ready to transmit a data file */
#define RTD_NOT_TX_READY (0x1) /* Not ready to transmit a data file */
/*
* Value constants for bft
*/
#define BFT_NO_BIN_FILE_TX (0x0) /* Not possible/intended to transmit a binary file */
#define BFT_BIN_FILE_TX (0x1) /* Possibility/intention to transmit a binary file */
/*
* Value constants for dtm
*/
#define DTM_NO_DOC_TX_MODE (0x0) /* Not possible/intended to perform the DTM */
#define DTM_DOC_TX_MODE (0x1) /* Possibility/intention to perform the DTM */
/*
* Value constants for edi
*/
#define EDI_NO_ELEC_DATA_XCHNG (0x0) /* Not possible/intended to perform EDI */
#define EDI_ELEC_DATA_XCHNG (0x1) /* Possibility/intention to perform EDI */
/*
* Value constants for btm
*/
#define BTM_NO_BASIC_TRANS_MODE (0x0) /* Not possible/intended to perform the BTM */
#define BTM_BASIC_TRANS_MODE (0x1) /* Possibility/intention to perform the BTM */
/*
* Value constants for ready_tx_mixed
*/
#define RTM_NO_READY_TX_MIXED (0x0) /* Not ready to transmit a character or mixed mode document */
#define RTM_READY_TX_MIXED (0x1) /* Ready to transmit a character or mixed mode document */
/*
* Value constants for char_mode
*/
#define CM_NO_CHARACTER_MODE (0x0) /* Not possible/intended to perform the character mode */
#define CM_CHARACTER_MODE (0x1) /* Possibility/intention to perform the character mode */
/*
* Value constants for mixed_mode
*/
#define MM_NO_MIXED_MODE (0x0) /* Not possible/intended to perform the mixed mode */
#define MM_MIXED_MODE (0x1) /* Possibility/intention to perform the mixed mode */
/*
* Value constants for proc_mode_26
*/
#define PM_NO_PROC_MODE_26 (0x0) /* Not possible/intended to perform the processable mode 26 */
#define PM_PROC_MODE_26 (0x1) /* Possibility/intention to perform the processable mode 26 */
/*
* Value constants for dig_network_cap
*/
#define DNC_NO_DIGITAL_NETWORK (0x0) /* Terminal is not on a digital network */
#define DNC_DIGITAL_NETWORK (0x1) /* Terminal is on a digital network */
/*
* Value constants for duplex
*/
#define DUP_HALF_DUPLEX (0x0) /* Operate in half duplex mode only */
#define DUP_FULL_DUPLEX (0x1) /* Operate in full-duplex or half duplex mode */
/*
* Value constants for jpeg
*/
#define JPG_NO_CODING (0x0) /* Not able/intent to code documents in JPEG */
#define JPG_CODING (0x1) /* Able/intent to code documents in JPEG */
/*
* Value constants for full_colour
*/
#define FC_NO_FULL_COLOR_MODE (0x0) /* Not able/intent to work in full colour mode */
#define FC_FULL_COLOR_MODE (0x1) /* Able/intent to work in full colour mode */
/*
* Value constants for r_12_bits_pel_comp
*/
#define BPP_8_BITS_PER_PEL (0x0) /* Images must/are digitised with 8 bits/pel */
#define BPP_12_BITS_PER_PEL (0x1) /* Images may be/are digitised with up to 12 bits/pel */
/*
* Value constants for no_subsamp
*/
#define NS_USE_4_1_1_SUB (0x0) /* Use the 4:1:1 sub-sampling ratio for the chrominance components in the image data */
#define NS_NO_SUBSAMPLING (0x1) /* Use no sub-sampling ratio for the chrominance components in the image data */
/*
* Value constants for cust_illum
*/
#define CI_USE_D50_ILLUM (0x0) /* Only the standard D50 illuminant for colour images supported/used */
#define CI_CUSTOM_ILLUM (0x1) /* Standard D50 illuminant and other illuminants are supported/used for colour images */
/*
* Value constants for cust_gamut
*/
#define CG_STD_GAMUT_RNG (0x0) /* Only the default gamut range for colour images supported/used */
#define CG_CUST_GAMUT_RNG (0x1) /* Other gamut ranges are supported/used for colour images */
/*
* Value constants for na_letter
*/
#define NLT_NO_NORTH_AMERICAN_LETTER (0x0) /* No North American Letter format is supported/used */
#define NLT_NORTH_AMERICAN_LETTER (0x1) /* No North American Letter format is supported/used */
/*
* Value constants for na_legal
*/
#define NLG_NO_NORTH_AMERICAN_LEGAL (0x0) /* No North American Legal format is supported/used */
#define NLG_NORTH_AMERICAN_LEGAL (0x1) /* No North American Legal format is supported/used */
/*
* Value constants for sing_prog_seq_coding_basic
*/
#define SPG_NO_SINGLE_PROG_BASIC (0x0) /* No single-progression sequential coding basic is supported/used */
#define SPG_SINGLE_PROG_BASIC (0x1) /* Single-progression sequential coding basic is supported/used */
/*
* Value constants for sing_prog_seq_coding_L0
*/
#define SPG_NO_SINGLE_PROG_L0 (0x0) /* No single-progression sequential coding optional L0 is supported/used */
#define SPG_SINGLE_PROG_L0 (0x1) /* Single-progression sequential coding optional L0 is supported/used */
/*
* Value constants for frame_size
*/
#define FS_256_OCTETS (0x0) /* Frame size of 256 octets is used if ECM is active */
#define FS_64_OCTETS (0x1) /* Frame size of 64 octets is used if ECM is active */
/*
* Value constants for resolution_type
*/
#define RT_METRIC_BASED (0x0) /* Metric based resolution */
#define RT_INCH_BASED (0x1) /* Inch based resolution */
/*
* Value constants for huffman_tables
*/
#define HT_NO_HUFFMAN_TABLES (0x0) /* No default Huffman tables used */
#define HT_HUFFMAN_TABLES (0x1) /* Default Huffman tables used */
/*
* user defined constants
*/
#define MAX_NSF_LEN (0x2d0)
#include "CDG_LEAVE.h"
#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -