📄 m_rr_com.val
字号:
/*
+--------------------------------------------------------------------------+
| PROJEKT : PROTOCOL STACK |
| FILE : M_RR_COM.val |
| SOURCE : "Z:\condat\gsm\condat\ms\dfile\msg\RR_COM.mdf" |
| LastModified : "18 June, 2002" |
| IdAndVersion : "8443.250.02.007" |
| SrcFileTime : "Thu Aug 14 00:00:00 2003" |
| Generated by CCDGEN_2.2.4 on Thu Aug 14 16:45:17 2003 |
| !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! |
+--------------------------------------------------------------------------+
*/
/* PRAGMAS
* PREFIX : NONE
* COMPATIBILITY_DEFINES : NO (require PREFIX)
* ALWAYS_ENUM_IN_VAL_FILE: NO
* ENABLE_GROUP: NO
*/
#ifndef M_RR_COM_VAL
#define M_RR_COM_VAL
#define CDG_ENTER__M_RR_COM_VAL
#define CDG_ENTER__FILENAME _M_RR_COM_VAL
#define CDG_ENTER__M_RR_COM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__M_RR_COM_VAL__LAST_MODIFIED _18_June_2002
#define CDG_ENTER__M_RR_COM_VAL__ID_AND_VERSION _8443_250_02_007
#define CDG_ENTER__M_RR_COM_VAL__SRC_FILE_TIME _Thu_Aug_14_00_00_00_2003
#include "CDG_ENTER.h"
#undef CDG_ENTER__M_RR_COM_VAL
#undef CDG_ENTER__FILENAME
/*
* Value constants for rev_lev
*/
#define PHASE_1 (0x0) /* Reserved for GSM phase 1 */
#define PHASE_2 (0x1) /* Used by GSM phase 2 mobile stations */
#define R99_SUPPORT (0x2) /* Used by mobile stations supporting R99 or later versions */
#define REV_LEV_GNOLZ_DEF (0x0) /* Reserved by future use */
/*
* Value constants for rf_pow_cap
*/
#define RF_CLASS_1 (0x0) /* class 1 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */
#define RF_CLASS_2 (0x1) /* class 2 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */
#define RF_CLASS_3 (0x2) /* class 3 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */
#define RF_CLASS_4 (0x3) /* class 4 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900) */
#define RF_CLASS_5 (0x4) /* class 5 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900) */
#define RF_POW_CAP_GNOLZ_5 (0x5) /* reserved */
#define RF_POW_CAP_GNOLZ_6 (0x6) /* reserved */
#define RF_CLASS_IRRELEVANT (0x7) /* irrelevent for this IE (multiband GSM MS) */
/*
* Value constants for ss_screen
*/
#define SS_SCREEN_DEFAULT (0x0) /* default value of phase 1 */
#define SS_SCREEN_PHASE_2 (0x1) /* capability of handling of ellipsis notation and phase 2 error handling */
#define SS_SCREEN_GNOLZ_DEF (0x0) /* for future use (The network shall interpret these values the same as 1) */
/*
* Value constants for egsm
*/
#define EGSM_NOT_SUPPORTED (0x0) /* The mobile station does not support the extension band. */
#define EGSM_SUPPORTED (0x1) /* The mobile station does support the extension band (E-GSM or R-GSM). */
/*
* Value constants for ucs2_treat
*/
#define DEFAULT_PREF (0x0) /* the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. */
#define NO_PREF (0x1) /* the ME has no preference between the use of the default alphabet and the use of UCS2. */
/*
* Value constants for gsm400_supp
*/
#define GSM400_SUPP_GNOLZ_0 (0x0) /* reserved (if neither GSM 480 nor GSM 450 is supported the whole gsm400_struct is omitted) */
#define GSM480 (0x1) /* GSM 480 supported but GSM 450 not supported */
#define GSM450 (0x2) /* GSM 450 supported but GSM 480 not supported */
#define GSM450_480 (0x3) /* GSM 450 supported and GSM 480 supported */
/*
* Value constants for sm_val
*/
#define SM_1 (0x0) /* 1/4 timeslot (~144 micro sec) */
#define SM_2 (0x1) /* 2/4 timeslot (~288 micro sec) */
#define SM_3 (0x2) /* 3/4 timeslot (~433 micro sec) */
#define SM_4 (0x3) /* 4/4 timeslot */
#define SM_5 (0x4) /* 5/4 timeslot */
#define SM_6 (0x5) /* 6/4 timeslot */
#define SM_7 (0x6) /* 7/4 timeslot */
#define SM_8 (0x7) /* 8/4 timeslot */
#define SM_9 (0x8) /* 9/4 timeslot */
#define SM_10 (0x9) /* 10/4 timeslot */
#define SM_11 (0xa) /* 11/4 timeslot */
#define SM_12 (0xb) /* 12/4 timeslot */
#define SM_13 (0xc) /* 13/4 timeslot */
#define SM_14 (0xd) /* 14/4 timeslot */
#define SM_15 (0xe) /* 15/4 timeslot */
#define SM_16 (0xf) /* 16/4 timeslot (~2307 micro sec) */
/*
* Value constants for egde_pow2
*/
#define EGDE_POW2_GNOLZ_0 (0x0) /* Reserved */
#define POWER_CLASS_E1 (0x1)
#define POWER_CLASS_E2 (0x2)
#define POWER_CLASS_E3 (0x3)
/*
* Value constants for dtm_e_ms_class
*/
#define SUB_CLASS_1 (0x0) /* Sub-Class 1 supported */
#define SUB_CLASS_5 (0x1) /* Sub-Class 5 supported */
#define SUP_CLASS_9 (0x2) /* Sub-Class 9 supported */
#define DTM_E_MS_CLASS_GNOLZ_3 (0x3) /* Reserved */
/*
* Value constants for egprs_ms_class
*/
#define MSLOT_CLASS_1 (0x1) /* Multi Slot Class 1 */
#define MSLOT_CLASS_2 (0x2) /* Multi Slot Class 2 */
#define MSLOT_CLASS_3 (0x3) /* Multi Slot Class 3 */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -