zigbee.def

zigbee 协调器应用演示程序源代码。zigbee是轻量级无线网络协议

#ifndef _ZIGBEE_DEF
#define _ZIGBEE_DEF

/*
 * Clock frequency value.
 * This value is used to calculate Tick Counter value
 */
#define CLOCK_FREQ                      (16000000)      // Hz Using HS-PLL

// For debug output.
#define BAUD_RATE                       (19200)

#if defined(WIN32)
#define TICKS_PER_SECOND                (CLOCKS_PER_SEC)
#define TICK_PRESCALE_VALUE             (2)
#else
#define TICKS_PER_SECOND                (50)
#define TICK_PRESCALE_VALUE             (2)
#endif

// Uncomment only one of the following as per hardware.
#define USE_CC2420
// ZMD is not supported yet.
//#define USE_ZMD44101

// Uncomment following line if you want to enable debug mode for entire project
// You may also enable debug selectively per source file by defining ENABLE_DEBUG
// in the individual file.
//#define ENABLE_DEBUG


// Uncomment one of the below to describe this node's functionality.
#define I_AM_COORDINATOR        
    //#define I_AM_ROUTER
    //#define I_AM_END_DEVICE

// Uncomment one of the below to specifiy frequency band of operation.
    //#define MY_FREQ_BAND_IS_868_MHZ
    //#define MY_FREQ_BAND_IS_900_MHZ
    #define MY_FREQ_BAND_IS_2400_MHZ

// Uncomment below if this node is a FFD and wants to be alternate PAN
// coordinator - note that only FFD can be alternate PAN coordinator
    //#define I_AM_ALT_PAN_COORD

// Uncomment one of the below to specify the power source
    #define I_AM_MAINS_POWERED
    //#define I_AM_RECHARGEABLE_BATTERY_POWERED
    //#define I_AM_DISPOSABLE_BATTERY_POWERED

// Uncomment one of the below to specify security capability.
// In current version security capability is not implemented.
    //#define I_AM_SECURITY_CAPABLE

// Uncomment one of the below to specify how receiver on/off is managed.
// Current version only implements non-beacon-enabled network,
// meaning, either you may have receiver always on, periodically or
// stimulated ON.
//#define MY_RX_IS_ALWAYS_ON_OR_SYNCED_WITH_BEACON
#define MY_RX_IS_PERIODICALLY_ON
//#define MY_RX_IS_ON_WHEN_STIMULATED


// All node must have unique extended address to begin with.
#define MAC_LONG_ADDR_BYTE0             (0x01)      // BYTE0:3 are user defined
#define MAC_LONG_ADDR_BYTE1             (0x00)
#define MAC_LONG_ADDR_BYTE2             (0x00)
#define MAC_LONG_ADDR_BYTE3             (0x00)
#define MAC_LONG_ADDR_BYTE4             (0x00)      // BYTE4:7 are OUI bytes.
#define MAC_LONG_ADDR_BYTE5             (0xa3)
#define MAC_LONG_ADDR_BYTE6             (0x04)
#define MAC_LONG_ADDR_BYTE7             (0x00)

// Increase this count as per your application requirement.
// These are the number of endpoints we will support.
#define MAX_EP_COUNT        (4)

// Uncomment following to use MAC RF test code.
#define MAC_USE_RF_TEST_CODE

// Uncomment following if this node is not a coordinator
// and wants coordinator to assign a short address to it.
#if defined(I_AM_END_DEVICE)
    #define MAC_USE_SHORT_ADDR
#endif

// RF RSSI energy threshold after which a channel is said to be
// occupied.
#define MAC_CHANNEL_ENERGY_THRESHOLD    (0x20)

// Number of times a frame should be retried before declaring error
#define MAC_MAX_FRAME_RETRIES           (3)

// Amount of time we should wait for ACK from remote node.
#define MAC_ACK_WAIT_DURATION           (TICK_SECOND/2)

// Amount of time we should wait for response from remote node.
#define MAC_RESPONSE_WAIT_TIME          (TICK_SECOND)

// Amount of time we should wait for RF energy measurement.
#define MAC_ED_SCAN_PERIOD              (TICK_SECOND/4)

// Amount of time we should do active scan.
#define MAC_ACTIVE_SCAN_PERIOD          (TICK_SECOND/2)

// Amount of time a staged frame should be kept in buffer and within
// which intended receipt must request that frame.
#define MAC_MAX_DATA_REQ_PERIOD         (TICK_SECOND*10)

// Staging transmit buffer size - used by coordinator devices only.
#define MAX_HEAP_SIZE       250

// Maximum number of neighbors this coordinator is to support
// This number if limited by amount of program memory available.
#define MAX_NEIGHBORS       (8)

// Maximum number of binding entries this coordinator is to support.
// This number if limited by amount of program memory available.
#define MAX_BINDINGS        (10)




#endif