linuxver.h

wi-fi sources for asus wl138g v2 pci card

/*
 * Linux-specific abstractions to gain some independence from linux kernel versions.
 * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
 *
 * Copyright 2005-2006, Broadcom Corporation
 * All Rights Reserved.
 * 
 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 *
 * $Id$
 */

#ifndef _linuxver_h_
#define _linuxver_h_

#include <linux/config.h>
#include <linux/version.h>

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0))
/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
#ifdef __UNDEF_NO_VERSION__
#undef __NO_VERSION__
#else
#define __NO_VERSION__
#endif
#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0) */

#if defined(MODULE) && defined(MODVERSIONS)
#include <linux/modversions.h>
#endif

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0)
#include <linux/moduleparam.h>
#endif


#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0)
#define module_param(_name_, _type_, _perm_)	MODULE_PARM(_name_, "i")
#define module_param_string(_name_, _string_, _size_, _perm_) \
		MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
#endif

/* linux/malloc.h is deprecated, use linux/slab.h instead. */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 9))
#include <linux/malloc.h>
#else
#include <linux/slab.h>
#endif

#include <linux/types.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <asm/io.h>

#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41))
#include <linux/workqueue.h>
#else
#include <linux/tqueue.h>
#ifndef work_struct
#define work_struct tq_struct
#endif
#ifndef INIT_WORK
#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
#endif
#ifndef schedule_work
#define schedule_work(_work) schedule_task((_work))
#endif
#ifndef flush_scheduled_work
#define flush_scheduled_work() flush_scheduled_tasks()
#endif
#endif	/* LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41) */

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
/* Some distributions have their own 2.6.x compatibility layers */
#ifndef IRQ_NONE
typedef void irqreturn_t;
#define IRQ_NONE
#define IRQ_HANDLED
#define IRQ_RETVAL(x)
#endif
#else
typedef irqreturn_t(*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0) */

#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)

#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 69))
/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which
 * does this, but it's not in 2.4 so we do our own for now.
 */
static inline void
cs_error(client_handle_t handle, int func, int ret)
{
	error_info_t err = { func, ret };
	CardServices(ReportError, handle, &err);
}
#endif

#endif /* CONFIG_PCMCIA */

#ifndef __exit
#define __exit
#endif
#ifndef __devexit
#define __devexit
#endif
#ifndef __devinit
#define __devinit	__init
#endif
#ifndef __devinitdata
#define __devinitdata
#endif
#ifndef __devexit_p
#define __devexit_p(x)	x
#endif

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0))

#define pci_get_drvdata(dev)		(dev)->sysdata
#define pci_set_drvdata(dev, value)	(dev)->sysdata = (value)

/*
 * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
 */

struct pci_device_id {
	unsigned int vendor, device;		/* Vendor and device ID or PCI_ANY_ID */
	unsigned int subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
	unsigned int class, class_mask;		/* (class,subclass,prog-if) triplet */
	unsigned long driver_data;		/* Data private to the driver */
};

struct pci_driver {
	struct list_head node;
	char *name;
	const struct pci_device_id *id_table;	/* NULL if wants all devices */
	int (*probe)(struct pci_dev *dev,
	             const struct pci_device_id *id); /* New device inserted */
	void (*remove)(struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug
						 * capable driver)
						 */
	void (*suspend)(struct pci_dev *dev);	/* Device suspended */
	void (*resume)(struct pci_dev *dev);	/* Device woken up */
};

#define MODULE_DEVICE_TABLE(type, name)
#define PCI_ANY_ID (~0)

/* compatpci.c */
#define pci_module_init pci_register_driver
extern int pci_register_driver(struct pci_driver *drv);
extern void pci_unregister_driver(struct pci_driver *drv);

#endif /* PCI registration */

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18))
#ifdef MODULE
#define module_init(x) int init_module(void) { return x(); }
#define module_exit(x) void cleanup_module(void) { x(); }
#else
#define module_init(x)	__initcall(x);
#define module_exit(x)	__exitcall(x);
#endif
#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18) */

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 48))
#define list_for_each(pos, head) \
	for (pos = (head)->next; pos != (head); pos = pos->next)
#endif

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 13))
#define pci_resource_start(dev, bar)	((dev)->base_address[(bar)])
#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 44))
#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
#endif

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 23))
#define pci_enable_device(dev) do { } while (0)
#endif

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 14))
#define net_device device
#endif

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 42))

/*
 * DMA mapping
 *
 * See linux/Documentation/DMA-mapping.txt
 */

#ifndef PCI_DMA_TODEVICE
#define	PCI_DMA_TODEVICE	1
#define	PCI_DMA_FROMDEVICE	2
#endif

typedef u32 dma_addr_t;

/* Pure 2^n version of get_order */
static inline int get_order(unsigned long size)
{
	int order;

	size = (size-1) >> (PAGE_SHIFT-1);
	order = -1;
	do {
		size >>= 1;
		order++;
	} while (size);
	return order;
}

static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
                                         dma_addr_t *dma_handle)
{
	void *ret;
	int gfp = GFP_ATOMIC | GFP_DMA;

	ret = (void *)__get_free_pages(gfp, get_order(size));

	if (ret != NULL) {
		memset(ret, 0, size);
		*dma_handle = virt_to_bus(ret);
	}
	return ret;
}
static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
                                       void *vaddr, dma_addr_t dma_handle)
{
	free_pages((unsigned long)vaddr, get_order(size));
}
#ifdef ILSIM
extern uint pci_map_single(void *dev, void *va, uint size, int direction);
extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
#else
#define pci_map_single(cookie, address, size, dir)	virt_to_bus(address)
#define pci_unmap_single(cookie, address, size, dir)
#endif

#endif /* DMA mapping */

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 43))

#define dev_kfree_skb_any(a)		dev_kfree_skb(a)
#define netif_down(dev)			do { (dev)->start = 0; } while (0)

/* pcmcia-cs provides its own netdevice compatibility layer */
#ifndef _COMPAT_NETDEVICE_H

/*
 * SoftNet
 *
 * For pre-softnet kernels we need to tell the upper layer not to
 * re-enter start_xmit() while we are in there. However softnet
 * guarantees not to enter while we are in there so there is no need
 * to do the netif_stop_queue() dance unless the transmit queue really
 * gets stuck. This should also improve performance according to tests
 * done by Aman Singla.
 */

#define dev_kfree_skb_irq(a)	dev_kfree_skb(a)
#define netif_wake_queue(dev) \
		do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while (0)
#define netif_stop_queue(dev)	set_bit(0, &(dev)->tbusy)

static inline void netif_start_queue(struct net_device *dev)
{
	dev->tbusy = 0;
	dev->interrupt = 0;
	dev->start = 1;
}

#define netif_queue_stopped(dev)	(dev)->tbusy
#define netif_running(dev)		(dev)->start

#endif /* _COMPAT_NETDEVICE_H */

#define netif_device_attach(dev)	netif_start_queue(dev)
#define netif_device_detach(dev)	netif_stop_queue(dev)

/* 2.4.x renamed bottom halves to tasklets */
#define tasklet_struct				tq_struct
static inline void tasklet_schedule(struct tasklet_struct *tasklet)
{
	queue_task(tasklet, &tq_immediate);
	mark_bh(IMMEDIATE_BH);
}

static inline void tasklet_init(struct tasklet_struct *tasklet,
                                void (*func)(unsigned long),
                                unsigned long data)
{
	tasklet->next = NULL;
	tasklet->sync = 0;
	tasklet->routine = (void (*)(void *))func;
	tasklet->data = (void *)data;
}
#define tasklet_kill(tasklet)	{ do{} while (0); }

/* 2.4.x introduced del_timer_sync() */
#define del_timer_sync(timer) del_timer(timer)

#else

#define netif_down(dev)

#endif /* SoftNet */

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3))

/*
 * Emit code to initialise a tq_struct's routine and data pointers
 */
#define PREPARE_TQUEUE(_tq, _routine, _data)			\
	do {							\
		(_tq)->routine = _routine;			\
		(_tq)->data = _data;				\
	} while (0)

/*
 * Emit code to initialise all of a tq_struct
 */
#define INIT_TQUEUE(_tq, _routine, _data)			\
	do {							\
		INIT_LIST_HEAD(&(_tq)->list);			\
		(_tq)->sync = 0;				\
		PREPARE_TQUEUE((_tq), (_routine), (_data));	\
	} while (0)

#endif	/* LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3) */

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 6))

/* Power management related routines */

static inline int
pci_save_state(struct pci_dev *dev, u32 *buffer)
{
	int i;
	if (buffer) {
		for (i = 0; i < 16; i++)
			pci_read_config_dword(dev, i * 4, &buffer[i]);
	}
	return 0;
}

static inline int
pci_restore_state(struct pci_dev *dev, u32 *buffer)
{
	int i;

	if (buffer) {
		for (i = 0; i < 16; i++)
			pci_write_config_dword(dev, i * 4, buffer[i]);
	}
	/*
	 * otherwise, write the context information we know from bootup.
	 * This works around a problem where warm-booting from Windows
	 * combined with a D3(hot)->D0 transition causes PCI config
	 * header data to be forgotten.
	 */
	else {
		for (i = 0; i < 6; i ++)
			pci_write_config_dword(dev,
			                       PCI_BASE_ADDRESS_0 + (i * 4),
			                       pci_resource_start(dev, i));
		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
	}
	return 0;
}

#endif /* PCI power management */

/* Old cp0 access macros deprecated in 2.4.19 */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 19))
#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
#endif

/* Module refcount handled internally in 2.6.x */
#ifndef SET_MODULE_OWNER
#define SET_MODULE_OWNER(dev)		do {} while (0)
#define OLD_MOD_INC_USE_COUNT		MOD_INC_USE_COUNT
#define OLD_MOD_DEC_USE_COUNT		MOD_DEC_USE_COUNT
#else
#define OLD_MOD_INC_USE_COUNT		do {} while (0)
#define OLD_MOD_DEC_USE_COUNT		do {} while (0)
#endif

#ifndef SET_NETDEV_DEV
#define SET_NETDEV_DEV(net, pdev)	do {} while (0)
#endif

#ifndef HAVE_FREE_NETDEV
#define free_netdev(dev)		kfree(dev)
#endif

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
/* struct packet_type redefined in 2.6.x */
#define af_packet_priv			data
#endif

#endif /* _linuxver_h_ */