tx_modulate.m

信号与系统基础知识包括连续信号与模型、离散信号与模型；常用信号变换包括Z变换、

function [mod_symbols,table, P] = tx_modulate(bits_in, modulation)

%**************************************************************************
%This program modulates the input binary data.The inputs are:
% bits_in -> the binary input bits
%modulation -> we choose one of 'BPSK','QPSK',8PSK',16QAM'
%The outputs are:
%mod_symbols -> modulated output
%table -> the complete set of symbols in a chosen constellation. This is
%required by the demodulator.
%P -> the number of points in a chosen constellation. This is required by
%the demodulator
%**************************************************************************

full_len = length(bits_in);

% BPSK modulation
if ~isempty(findstr(modulation, 'BPSK'))
   % Angle [pi/4 -3*pi/4] corresponds to 
   % Gray code vector [0 1], respectively.
   table=exp(j*[0 -pi]);  % generates BPSK symbols
   table=table([1 0]+1); % Gray code mapping pattern for BPSK symbols
   inp=bits_in;
   mod_symbols=table(inp+1);  % maps transmitted bits into BPSK symbols
   P=2;% 2 constellation points
   % QPSK modulation
elseif ~isempty(findstr(modulation, 'QPSK'))
   % Angle [pi/4 3*pi/4 -3*pi/4 -pi/4] corresponds to 
   % Gray code vector [00 10 11 01], respectively.
   table=exp(j*[-3/4*pi 3/4*pi 1/4*pi -1/4*pi]);  % generates QPSK symbols
   table=table([0 1 3 2]+1); % Gray code mapping pattern for QPSK symbols
   inp=reshape(bits_in,2,full_len/2);
   mod_symbols=table([2 1]*inp+1);  % maps transmitted bits into QPSK symbols
   P=4;% 4 constellation points
elseif  ~isempty(findstr(modulation, '8PSK'))
    % generate constellations
       % Angle [0 pi/4 pi/2 3*pi/4 pi 5*pi/4 3*pi/2 7*pi/4] corresponds to 
   % Gray code vector [000 001 011 010 110 111 101 100], respectively.
   table=exp(j*[0 pi/4 pi/2 3*pi/4 pi 5*pi/4 3*pi/2 7*pi/4]);  % generates 8PSK symbols
   table=table([0 1 3 2 6 7 5 4]+1); % Gray code mapping pattern for 8PSK symbols
   inp=reshape(bits_in,3,full_len/3);
   mod_symbols=table([4 2 1]*inp+1);  % maps transmitted bits into 8PSK symbols
   P=8;%8 constellation points
   % 16-QAM modulation
elseif ~isempty(findstr(modulation, '16QAM'))
   % generates 16QAM symbols
      m=1;
   for k=-3:2:3
      for l=-3:2:3
         table(m) = (k+j*l)/sqrt(10); % power normalization
         m=m+1;
      end;
   end;
   table=table([0 1 3 2 4 5 7 6 12 13 15 14 8 9 11 10]+1); % Gray code mapping pattern for 8-PSK symbols
   inp=reshape(bits_in,4,full_len/4);
   mod_symbols=table([8 4 2 1]*inp+1);  % maps transmitted bits into 16QAM symbols
   P=16; %16 constellation points

else
   error('Unimplemented modulation');
end