eccnandflash.c

8bit nand flash interface for at91sam9263ek,其中编辑器为keil for mdk

/* ----------------------------------------------------------------------------
 *         ATMEL Microcontroller Software Support 
 * ----------------------------------------------------------------------------
 * Copyright (c) 2008, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

//------------------------------------------------------------------------------
//         Headers
//------------------------------------------------------------------------------

#include "EccNandFlash.h"
#include "NandCommon.h"
#include "NandSpareScheme.h"
#include <utility/trace.h>
#include <utility/hamming.h>
#include <utility/assert.h>

#include <string.h>

//------------------------------------------------------------------------------
//         Internal definitions
//------------------------------------------------------------------------------

/// Casts
#define MODEL(ecc)  ((struct NandFlashModel *) ecc)
#define RAW(ecc)    ((struct RawNandFlash *) ecc)

//------------------------------------------------------------------------------
//         Exported functions
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
/// Initializes an EccNandFlash instance.
/// \param ecc  Pointer to an EccNandFlash instance.
/// \param model  Pointer to the underlying nand chip model. Can be 0.
/// \param commandAddress  Address at which commands are sent.
/// \param addressAddress  Address at which addresses are sent.
/// \param dataAddress  Address at which data is sent.
/// \param pinChipEnable  Pin controlling the CE signal of the NandFlash.
/// \param pinReadyBusy  Pin used to monitor the ready/busy signal of the Nand.
//------------------------------------------------------------------------------
unsigned char EccNandFlash_Initialize(
    struct EccNandFlash *ecc,
    const struct NandFlashModel *model,
    unsigned int commandAddress,
    unsigned int addressAddress,
    unsigned int dataAddress,
    const Pin pinChipEnable,
    const Pin pinReadyBusy)
{
    return RawNandFlash_Initialize(RAW(ecc),
                                   model,
                                   commandAddress,
                                   addressAddress,
                                   dataAddress,
                                   pinChipEnable,
                                   pinReadyBusy);
}

//------------------------------------------------------------------------------
/// Reads the data and/or spare of a page of a nandflash chip, and verify that
/// the data is valid using the ECC information contained in the spare. If one
/// buffer pointer is 0, the corresponding area is not saved.
/// Returns 0 if the data has been read and is valid; otherwise returns either
/// NandCommon_ERROR_CORRUPTEDDATA or ...
/// \param ecc  Pointer to an EccNandFlash instance.
/// \param block  Number of block to read from.
/// \param page  Number of page to read inside given block.
/// \param data  Data area buffer.
/// \param spare  Spare area buffer.
//------------------------------------------------------------------------------
unsigned char EccNandFlash_ReadPage(
    const struct EccNandFlash *ecc,
    unsigned short block,
    unsigned short page,
    void *data,
    void *spare)
{
    unsigned char tmpData[NandCommon_MAXPAGEDATASIZE];
    unsigned char tmpSpare[NandCommon_MAXPAGESPARESIZE];
    unsigned char error;
    unsigned char hamming[NandCommon_MAXSPAREECCBYTES];
    unsigned short pageDataSize = NandFlashModel_GetPageDataSize(MODEL(ecc));
    unsigned char pageSpareSize = NandFlashModel_GetPageSpareSize(MODEL(ecc));

    TRACE_DEBUG("EccNandFlash_ReadPage(B#%d:P#%d)\n\r", block, page);

    // Start by reading the spare and the data
    error = RawNandFlash_ReadPage(RAW(ecc), block, page, tmpData, tmpSpare);
    if (error) {

        TRACE_ERROR("EccNandFlash_ReadPage: Failed to read page\n\r");
        return error;
    }

    // Retrieve ECC information from page and verify the data
    NandSpareScheme_ReadEcc(NandFlashModel_GetScheme(MODEL(ecc)), tmpSpare, hamming);
    error = Hamming_Verify256x(tmpData, pageDataSize, hamming);
    if (error && (error != Hamming_ERROR_SINGLEBIT)) {

        TRACE_ERROR("EccNandFlash_ReadPage: Unrecoverable data\n\r");
        return NandCommon_ERROR_CORRUPTEDDATA;
    }

    // Copy data and/or spare into final buffers
    if (data) {

        memcpy(data, tmpData, pageDataSize);
    }
    if (spare) {

        memcpy(spare, tmpSpare, pageSpareSize);
    }

    return 0;
}

//------------------------------------------------------------------------------
/// Writes the data and/or spare area of a nandflash page, after calculating an
/// ECC for the data area and storing it in the spare. If no data buffer is
/// provided, the ECC is read from the existing page spare. If no spare buffer
/// is provided, the spare area is still written with the ECC information
/// calculated on the data buffer.
/// Returns 0 if successful; otherwise returns an error code.
/// \param ecc Pointer to an EccNandFlash instance.
/// \param block  Number of the block to write in.
/// \param page  Number of the page to write inside the given block.
/// \param data  Data area buffer, can be 0.
/// \param spare  Spare area buffer, can be 0.
//------------------------------------------------------------------------------
unsigned char EccNandFlash_WritePage(
    const struct EccNandFlash *ecc,
    unsigned short block,
    unsigned short page,
    void *data,
    void *spare)
{
    unsigned char error;
    unsigned char tmpSpare[NandCommon_MAXPAGESPARESIZE];
    unsigned short pageDataSize = NandFlashModel_GetPageDataSize(MODEL(ecc));
    unsigned short pageSpareSize = NandFlashModel_GetPageSpareSize(MODEL(ecc));
    unsigned char hamming[NandCommon_MAXSPAREECCBYTES];

    ASSERT(data || spare, "EccNandFlash_WritePage: At least one area must be written\n\r");
    TRACE_DEBUG("EccNandFlash_WritePage(B#%d:P#%d)\n\r", block, page);

    // Compute ECC on the new data, if provided
    // If not provided, hamming code set to 0xFFFF.. to keep existing bytes
    memset(hamming, 0xFF, NandCommon_MAXSPAREECCBYTES);
    if (data) {

        // Compute hamming code on data
        Hamming_Compute256x(data, pageDataSize, hamming);
    }

    // Store code in spare buffer (if no buffer provided, use a temp. one)
    if (!spare) {

        spare = tmpSpare;
        memset(spare, 0xFF, pageSpareSize);
    }
    NandSpareScheme_WriteEcc(NandFlashModel_GetScheme(MODEL(ecc)), spare, hamming);

    // Perform write operation
    error = RawNandFlash_WritePage(RAW(ecc), block, page, data, spare);
    if (error) {

        TRACE_ERROR("EccNandFlash_WritePage: Failed to write page\n\r");
        return error;
    }

    return 0;
}