at91sam9263.h

iso7816 interface for at91sam9263ek,其中编辑环境为keil for arm mdk

	AT91_REG	 SYS_MATRIX_PRBS1; 	//  PRBS1
	AT91_REG	 SYS_MATRIX_PRAS2; 	//  PRAS2
	AT91_REG	 SYS_MATRIX_PRBS2; 	//  PRBS2
	AT91_REG	 SYS_MATRIX_PRAS3; 	//  PRAS3
	AT91_REG	 SYS_MATRIX_PRBS3; 	//  PRBS3
	AT91_REG	 SYS_MATRIX_PRAS4; 	//  PRAS4
	AT91_REG	 SYS_MATRIX_PRBS4; 	//  PRBS4
	AT91_REG	 SYS_MATRIX_PRAS5; 	//  PRAS5
	AT91_REG	 SYS_MATRIX_PRBS5; 	//  PRBS5
	AT91_REG	 SYS_MATRIX_PRAS6; 	//  PRAS6
	AT91_REG	 SYS_MATRIX_PRBS6; 	//  PRBS6
	AT91_REG	 SYS_MATRIX_PRAS7; 	//  PRAS7
	AT91_REG	 SYS_MATRIX_PRBS7; 	//  PRBS7
	AT91_REG	 Reserved8[16]; 	//
	AT91_REG	 SYS_MATRIX_MRCR; 	//  Master Remp Control Register
	AT91_REG	 Reserved9[63]; 	//
	AT91_REG	 SYS_DBGU_CR; 	// Control Register
	AT91_REG	 SYS_DBGU_MR; 	// Mode Register
	AT91_REG	 SYS_DBGU_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_DBGU_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_DBGU_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_DBGU_CSR; 	// Channel Status Register
	AT91_REG	 SYS_DBGU_RHR; 	// Receiver Holding Register
	AT91_REG	 SYS_DBGU_THR; 	// Transmitter Holding Register
	AT91_REG	 SYS_DBGU_BRGR; 	// Baud Rate Generator Register
	AT91_REG	 Reserved10[7]; 	//
	AT91_REG	 SYS_DBGU_CIDR; 	// Chip ID Register
	AT91_REG	 SYS_DBGU_EXID; 	// Chip ID Extension Register
	AT91_REG	 SYS_DBGU_FNTR; 	// Force NTRST Register
	AT91_REG	 Reserved11[45]; 	//
	AT91_REG	 SYS_DBGU_RPR; 	// Receive Pointer Register
	AT91_REG	 SYS_DBGU_RCR; 	// Receive Counter Register
	AT91_REG	 SYS_DBGU_TPR; 	// Transmit Pointer Register
	AT91_REG	 SYS_DBGU_TCR; 	// Transmit Counter Register
	AT91_REG	 SYS_DBGU_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 SYS_DBGU_RNCR; 	// Receive Next Counter Register
	AT91_REG	 SYS_DBGU_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 SYS_DBGU_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 SYS_DBGU_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 SYS_DBGU_PTSR; 	// PDC Transfer Status Register
	AT91_REG	 Reserved12[54]; 	//
	AT91_REG	 SYS_AIC_SMR[32]; 	// Source Mode Register
	AT91_REG	 SYS_AIC_SVR[32]; 	// Source Vector Register
	AT91_REG	 SYS_AIC_IVR; 	// IRQ Vector Register
	AT91_REG	 SYS_AIC_FVR; 	// FIQ Vector Register
	AT91_REG	 SYS_AIC_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_AIC_IPR; 	// Interrupt Pending Register
	AT91_REG	 SYS_AIC_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_AIC_CISR; 	// Core Interrupt Status Register
	AT91_REG	 Reserved13[2]; 	//
	AT91_REG	 SYS_AIC_IECR; 	// Interrupt Enable Command Register
	AT91_REG	 SYS_AIC_IDCR; 	// Interrupt Disable Command Register
	AT91_REG	 SYS_AIC_ICCR; 	// Interrupt Clear Command Register
	AT91_REG	 SYS_AIC_ISCR; 	// Interrupt Set Command Register
	AT91_REG	 SYS_AIC_EOICR; 	// End of Interrupt Command Register
	AT91_REG	 SYS_AIC_SPU; 	// Spurious Vector Register
	AT91_REG	 SYS_AIC_DCR; 	// Debug Control Register (Protect)
	AT91_REG	 Reserved14[1]; 	//
	AT91_REG	 SYS_AIC_FFER; 	// Fast Forcing Enable Register
	AT91_REG	 SYS_AIC_FFDR; 	// Fast Forcing Disable Register
	AT91_REG	 SYS_AIC_FFSR; 	// Fast Forcing Status Register
	AT91_REG	 Reserved15[45]; 	//
	AT91_REG	 SYS_PIOA_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOA_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOA_PSR; 	// PIO Status Register
	AT91_REG	 Reserved16[1]; 	//
	AT91_REG	 SYS_PIOA_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOA_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOA_OSR; 	// Output Status Register
	AT91_REG	 Reserved17[1]; 	//
	AT91_REG	 SYS_PIOA_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOA_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOA_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved18[1]; 	//
	AT91_REG	 SYS_PIOA_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOA_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOA_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOA_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOA_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOA_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOA_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOA_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOA_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOA_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOA_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved19[1]; 	//
	AT91_REG	 SYS_PIOA_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOA_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOA_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved20[1]; 	//
	AT91_REG	 SYS_PIOA_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOA_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOA_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved21[9]; 	//
	AT91_REG	 SYS_PIOA_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOA_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOA_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved22[85]; 	//
	AT91_REG	 SYS_PIOB_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOB_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOB_PSR; 	// PIO Status Register
	AT91_REG	 Reserved23[1]; 	//
	AT91_REG	 SYS_PIOB_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOB_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOB_OSR; 	// Output Status Register
	AT91_REG	 Reserved24[1]; 	//
	AT91_REG	 SYS_PIOB_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOB_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOB_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved25[1]; 	//
	AT91_REG	 SYS_PIOB_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOB_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOB_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOB_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOB_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOB_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOB_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOB_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOB_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOB_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOB_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved26[1]; 	//
	AT91_REG	 SYS_PIOB_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOB_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOB_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved27[1]; 	//
	AT91_REG	 SYS_PIOB_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOB_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOB_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved28[9]; 	//
	AT91_REG	 SYS_PIOB_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOB_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOB_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved29[85]; 	//
	AT91_REG	 SYS_PIOC_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOC_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOC_PSR; 	// PIO Status Register
	AT91_REG	 Reserved30[1]; 	//
	AT91_REG	 SYS_PIOC_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOC_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOC_OSR; 	// Output Status Register
	AT91_REG	 Reserved31[1]; 	//
	AT91_REG	 SYS_PIOC_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOC_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOC_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved32[1]; 	//
	AT91_REG	 SYS_PIOC_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOC_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOC_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOC_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOC_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOC_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOC_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOC_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOC_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOC_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOC_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved33[1]; 	//
	AT91_REG	 SYS_PIOC_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOC_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOC_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved34[1]; 	//
	AT91_REG	 SYS_PIOC_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOC_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOC_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved35[9]; 	//
	AT91_REG	 SYS_PIOC_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOC_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOC_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved36[85]; 	//
	AT91_REG	 SYS_PIOD_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOD_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOD_PSR; 	// PIO Status Register
	AT91_REG	 Reserved37[1]; 	//
	AT91_REG	 SYS_PIOD_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOD_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOD_OSR; 	// Output Status Register
	AT91_REG	 Reserved38[1]; 	//
	AT91_REG	 SYS_PIOD_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOD_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOD_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved39[1]; 	//
	AT91_REG	 SYS_PIOD_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOD_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOD_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOD_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOD_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOD_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOD_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOD_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOD_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOD_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOD_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved40[1]; 	//
	AT91_REG	 SYS_PIOD_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOD_PPUER; 	// Pull-up Enable Register