asm_isr.s

关于测试at91sam9260的各种驱动和功能的测试源代码。

;------------------------------------------------------------------------------
;------------------------------ Copyright (c)---------------------------------- 
;
;			                  POLAR STAR
;				          北天星国际有限公司
;				        http://www.po-star.com
;
;文 件 名: it_handler.s
;
;编译环境：ADS1.2
;
;
;------------------------------------------------------------------------------


	AREA        itHandler, CODE, READONLY
;------------------------------------------------------------------------------
;- LISR vector handler for system peripherals
;--------------------------------------------
;- This macro save the context, call the LISR dispatch routine, and restore
;- the context
;------------------------------------------------------------------------------

    INCLUDE   AT91SAM9260.inc

;--------------------------------
;- ARM Core Mode and Status Bits
;--------------------------------

ARM_MODE_USER           EQU     0x10
ARM_MODE_FIQ            EQU     0x11
ARM_MODE_IRQ            EQU     0x12
ARM_MODE_SVC            EQU     0x13
ARM_MODE_ABORT          EQU     0x17
ARM_MODE_UNDEF          EQU     0x1B
ARM_MODE_SYS            EQU     0x1F

I_BIT                   EQU     0x80
F_BIT                   EQU     0x40
T_BIT                   EQU     0x20


;------------------------------------------------------------------------------
;- IRQ Entry
;-----------
;------------------------------------------------------------------------------
	MACRO
	IRQ_ENTRY   $reg

;- Adjust and save LR_irq in IRQ stack
 	sub         r14, r14, #4
	stmfd       sp!, {r14}

;- Write in the IVR to support Protect Mode
;- No effect in Normal Mode
;- De-assert the NIRQ and clear the source in Protect Mode
	ldr         r14, =AT91C_BASE_AIC
	str         r14, [r14, #AIC_IVR]

;- Save SPSR and r0 in IRQ stack
	mrs         r14, SPSR
	stmfd       sp!, {r0, r14}

;- Enable Interrupt and Switch in SYS Mode
	mrs         r0, CPSR
	bic         r0, r0, #I_BIT
	orr         r0, r0, #ARM_MODE_SYS
	msr         CPSR_c, r0

;- Save scratch/used registers and LR in User Stack
	IF  "$reg" = ""
	stmfd       sp!, { r1-r3, r12, r14}
	ELSE
	stmfd       sp!, { r1-r3, $reg, r12, r14}
	ENDIF

	MEND

;------------------------------------------------------------------------------
;- IRQ Exit
; ---------
;------------------------------------------------------------------------------
 	MACRO
	IRQ_EXIT    $reg
   
;- Restore scratch/used registers and LR from User Stack
 	IF  "$reg" = ""
	ldmia       sp!, { r1-r3, r12, r14}
	ELSE
	ldmia       sp!, { r1-r3, $reg, r12, r14}
	ENDIF

;- Disable Interrupt and switch back in IRQ mode
	mrs         r0, CPSR
	bic         r0, r0, #ARM_MODE_SYS
	orr         r0, r0, #I_BIT:OR:ARM_MODE_IRQ
	msr         CPSR_c, r0

;- Mark the End of Interrupt on the AIC
	ldr         r0, =AT91C_BASE_AIC
	str         r0, [r0, #AIC_EOICR]

;- Restore SPSR_irq and r0 from IRQ stack
	ldmia       sp!, {r0, r14}
	msr         SPSR_cxsf, r14

;- Restore adjusted  LR_irq from IRQ stack directly in the PC
	ldmia       sp!, {pc}^

	MEND


;------------------------------------------------------------------------------
; AT91F_ASM_SYSIRQ_Handler
; ---------------------
;       Handler called by the AIC
;       
;	Save context
;       Call C handler
; 	Restore context
;------------------------------------------------------------------------------
	EXPORT AT91F_ASM_I2S_Init_Handler
	IMPORT AT91F_I2S_Init_Handler
	
AT91F_ASM_I2S_Init_Handler
	IRQ_ENTRY

	ldr     r1, =AT91F_I2S_Init_Handler
	mov     r14, pc
	bx      r1

	IRQ_EXIT
;------------------------------------------------------------------------------

;------------------------------------------------------------------------------
; AT91F_ASM_SmartCI_Handler
; ---------------------
;       Handler called by the AIC
;       
;	Save context
;       Call C handler
; 	Restore context
;------------------------------------------------------------------------------
	EXPORT AT91F_ASM_I2S_Handler
	IMPORT AT91F_I2S_Handler
	
AT91F_ASM_I2S_Handler
	IRQ_ENTRY

	ldr     r1, =AT91F_I2S_Handler
	mov     r14, pc
	bx      r1

	IRQ_EXIT
;------------------------------------------------------------------------------


	END