chengxu.lst

PC控制八路继电器控制板

C51 COMPILER V8.05a   CHENGXU                                                              10/12/2010 19:20:58 PAGE 1   


C51 COMPILER V8.05a, COMPILATION OF MODULE CHENGXU
OBJECT MODULE PLACED IN chengxu.OBJ
COMPILER INVOKED BY: C:\Keil\C51\BIN\C51.EXE chengxu.c BROWSE DEBUG OBJECTEXTEND

line level    source

   1          /********************************************************************
   2                                      汇诚科技
   3          
   4          实现功能:随机输出控制程序
   5          使用芯片：AT89S52
   6          晶振：11.0592MHZ
   7          波特率：9600
   8          编译环境：Keil
   9          作者：zhangxinchunleo
  10          网站：www.ourhc.cn
  11          淘宝店：汇诚科技 http://shop36330473.taobao.com
  12          【声明】此程序仅用于学习与参考，引用请注明版权和作者信息！     
  13          
  14          *********************************************************************/
  15          /********************************************************************
  16          程序说明：
  17          
  18          程序中数组KM（数据表）中的数据控制8个继电器的吸合状态，继电器不断变化状态，
  19          适合用作控制广告彩灯，灯箱，等等。。。
  20          *********************************************************************/
  21          #include<reg52.h>              //库文件
  22          #define uchar unsigned char//宏定义无符号字符型
  23          #define uint unsigned int  //宏定义无符号整型
  24          /********************************************************************
  25                                      初始定义
  26          *********************************************************************/
  27          
  28          /*定义八位出为单片机P2口*/
  29          sbit K1=P2^0;
  30          sbit K2=P2^1;
  31          sbit K3=P2^2;
  32          sbit K4=P2^3;
  33          sbit K5=P2^4;
  34          sbit K6=P2^5;
  35          sbit K7=P2^6;
  36          sbit K8=P2^7;
  37          
  38          /*定义八位入为单片机P1口*/
  39          sbit SB1=P1^0;
  40          sbit SB2=P1^1;
  41          sbit SB3=P1^2;
  42          sbit SB4=P1^3;
  43          sbit SB5=P1^4;
  44          sbit SB6=P1^5;
  45          sbit SB7=P1^6;
  46          sbit SB8=P1^7;
  47          
  48          /********************************************************************
  49                                      数据表格
  50          *********************************************************************/
  51          code uchar KM[]={
  52          0xFF,0xE1,0xFF,0xFF,0xFF,0xFF,0xFC,0xC5,0x92,0xFF,0xB7,0xB8,0xC9,0x80,0x7F,0xFF, 
  53          0x00,0x03,0xFF,0xFF,0xFF,0xFF,0xFC,0x4F,0xEF,0x3F,0xC8,0x1A,0x20,0xC0,0x00,0x00, 
  54          0x00,0x03,0xFF,0xFF,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0x75,0x86,0xF6,0xC0,0x00,0x00, 
  55          0xFF,0x03,0xEF,0x9F,0xFB,0xFF,0xF8,0x7F,0xFF,0xFF,0xFB,0xDF,0xFE,0xC0,0x7F,0xFF, 
C51 COMPILER V8.05a   CHENGXU                                                              10/12/2010 19:20:58 PAGE 2   

  56          0x00,0x07,0xDE,0x7F,0xC7,0xFF,0xF0,0x7E,0x7F,0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00, 
  57          0x00,0x07,0x1C,0xF7,0x9F,0xDF,0xF0,0x7E,0x7F,0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00, 
  58          0xFC,0x07,0x00,0x8C,0x1F,0xBF,0xE7,0x3C,0x3F,0xFF,0xFF,0xFF,0xFF,0xC0,0x7F,0xFF, 
  59          0x00,0x07,0x00,0x08,0x1C,0x3F,0x88,0x3C,0x7F,0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00, 
  60          0x00,0x06,0x0C,0x08,0x98,0x7F,0x80,0x0D,0x9F,0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00, 
  61          0xFC,0x06,0x1C,0xE3,0x99,0xFF,0x00,0x0C,0x0F,0xFF,0xFF,0xFF,0xFF,0xC0,0x5F,0xFF, 
  62          
  63          }; //数据表格
  64          
  65          /********************************************************************
  66                                      延时函数
  67          *********************************************************************/
  68          void delay(uchar t)      //当t等于50时，大概延时0.5秒；当t等于10时，大概延时0.1秒；
  69          {
  70   1      uchar m,n,s;
  71   1      for(m=t;m>0;m--)
  72   1      for(n=20;n>0;n--)
  73   1      for(s=248;s>0;s--);
  74   1      }
  75          
  76          /********************************************************************
  77                                      主函数
  78          *********************************************************************/
  79          void main()
  80          {
  81   1       uchar a,b;
  82   1       for(a=0;a<3;a++)        //循环3次
  83   1       {
  84   2         for(b=0;b<160;b++)//继电器输出数据表里的状态
  85   2         {
  86   3           P2=KM[b];           //取表格里的数据送P2口
  87   3               delay(50);              //延时约0.5秒
  88   3          }
  89   2       }
  90   1      
  91   1      }
  92          
  93          
  94                  
  95          /********************************************************************
  96                                        结束
  97          *********************************************************************/


MODULE INFORMATION:   STATIC OVERLAYABLE
   CODE SIZE        =     43    ----
   CONSTANT SIZE    =    160    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
   DATA SIZE        =   ----    ----
   IDATA SIZE       =   ----    ----
   BIT SIZE         =   ----    ----
END OF MODULE INFORMATION.


C51 COMPILATION COMPLETE.  0 WARNING(S),  0 ERROR(S)