icerevisitedradix.cpp

opcode是功能强大

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
 *	Contains source code from the article "Radix Sort Revisited".
 *	\file		IceRevisitedRadix.cpp
 *	\author		Pierre Terdiman
 *	\date		April, 4, 2000
 */
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
 *	Revisited Radix Sort.
 *	This is my new radix routine:
 *  - it uses indices and doesn't recopy the values anymore, hence wasting less ram
 *  - it creates all the histograms in one run instead of four
 *  - it sorts words faster than dwords and bytes faster than words
 *  - it correctly sorts negative floating-point values by patching the offsets
 *  - it automatically takes advantage of temporal coherence
 *  - multiple keys support is a side effect of temporal coherence
 *  - it may be worth recoding in asm... (mainly to use FCOMI, FCMOV, etc) [it's probably memory-bound anyway]
 *
 *	History:
 *	- 08.15.98: very first version
 *	- 04.04.00: recoded for the radix article
 *	- 12.xx.00: code lifting
 *	- 09.18.01: faster CHECK_PASS_VALIDITY thanks to Mark D. Shattuck (who provided other tips, not included here)
 *	- 10.11.01: added local ram support
 *	- 01.20.02: bugfix! In very particular cases the last pass was skipped in the float code-path, leading to incorrect sorting......
 *	- 01.02.02:	- "mIndices" renamed => "mRanks". That's a rank sorter after all.
 *				- ranks are not "reset" anymore, but implicit on first calls
 *	- 07.05.02:	- offsets rewritten with one less indirection.
 *	- 11.03.02:	- "bool" replaced with RadixHint enum
 *
 *	\class		RadixSort
 *	\author		Pierre Terdiman
 *	\version	1.4
 *	\date		August, 15, 1998
 */
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

/*
To do:
	- add an offset parameter between two input values (avoid some data recopy sometimes)
	- unroll ? asm ?
	- 11 bits trick & 3 passes as Michael did
	- prefetch stuff the day I have a P3
	- make a version with 16-bits indices ?
*/

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Precompiled Header
#include "Opcode/Stdafx.h"

using namespace IceCore;

#define INVALIDATE_RANKS	mCurrentSize|=0x80000000
#define VALIDATE_RANKS		mCurrentSize&=0x7fffffff
#define CURRENT_SIZE		(mCurrentSize&0x7fffffff)
#define INVALID_RANKS		(mCurrentSize&0x80000000)

#define CHECK_RESIZE(n)																		\
	if(n!=mPreviousSize)																	\
	{																						\
				if(n>mCurrentSize)	Resize(n);												\
		else						ResetRanks();											\
		mPreviousSize = n;																	\
	}

#define CREATE_HISTOGRAMS(type, buffer)														\
	/* Clear counters/histograms */															\
	ZeroMemory(mHistogram, 256*4*sizeof(udword));											\
																							\
	/* Prepare to count */																	\
	ubyte* p = (ubyte*)input;																\
	ubyte* pe = &p[nb*4];																	\
	udword* h0= &mHistogram[0];		/* Histogram for first pass (LSB)	*/					\
	udword* h1= &mHistogram[256];	/* Histogram for second pass		*/					\
	udword* h2= &mHistogram[512];	/* Histogram for third pass			*/					\
	udword* h3= &mHistogram[768];	/* Histogram for last pass (MSB)	*/					\
																							\
	bool AlreadySorted = true;	/* Optimism... */											\
																							\
	if(INVALID_RANKS)																		\
	{																						\
		/* Prepare for temporal coherence */												\
		type* Running = (type*)buffer;														\
		type PrevVal = *Running;															\
																							\
		while(p!=pe)																		\
		{																					\
			/* Read input buffer in previous sorted order */								\
			type Val = *Running++;															\
			/* Check whether already sorted or not */										\
			if(Val<PrevVal)	{ AlreadySorted = false; break; } /* Early out */				\
			/* Update for next iteration */													\
			PrevVal = Val;																	\
																							\
			/* Create histograms */															\
			h0[*p++]++;	h1[*p++]++;	h2[*p++]++;	h3[*p++]++;									\
		}																					\
																							\
		/* If all input values are already sorted, we just have to return and leave the */	\
		/* previous list unchanged. That way the routine may take advantage of temporal */	\
		/* coherence, for example when used to sort transparent faces.					*/	\
		if(AlreadySorted)																	\
		{																					\
			mNbHits++;																		\
			for(udword i=0;i<nb;i++)	mRanks[i] = i;										\
			return *this;																	\
		}																					\
	}																						\
	else																					\
	{																						\
		/* Prepare for temporal coherence */												\
		udword* Indices = mRanks;															\
		type PrevVal = (type)buffer[*Indices];												\
																							\
		while(p!=pe)																		\
		{																					\
			/* Read input buffer in previous sorted order */								\
			type Val = (type)buffer[*Indices++];											\
			/* Check whether already sorted or not */										\
			if(Val<PrevVal)	{ AlreadySorted = false; break; } /* Early out */				\
			/* Update for next iteration */													\
			PrevVal = Val;																	\
																							\
			/* Create histograms */															\
			h0[*p++]++;	h1[*p++]++;	h2[*p++]++;	h3[*p++]++;									\
		}																					\
																							\
		/* If all input values are already sorted, we just have to return and leave the */	\
		/* previous list unchanged. That way the routine may take advantage of temporal */	\
		/* coherence, for example when used to sort transparent faces.					*/	\
		if(AlreadySorted)	{ mNbHits++; return *this;	}									\
	}																						\
																							\
	/* Else there has been an early out and we must finish computing the histograms */		\
	while(p!=pe)																			\
	{																						\
		/* Create histograms without the previous overhead */								\
		h0[*p++]++;	h1[*p++]++;	h2[*p++]++;	h3[*p++]++;										\
	}

#define CHECK_PASS_VALIDITY(pass)															\
	/* Shortcut to current counters */														\
	udword* CurCount = &mHistogram[pass<<8];												\
																							\
	/* Reset flag. The sorting pass is supposed to be performed. (default) */				\
	bool PerformPass = true;																\
																							\
	/* Check pass validity */																\
																							\
	/* If all values have the same byte, sorting is useless. */								\
	/* It may happen when sorting bytes or words instead of dwords. */						\
	/* This routine actually sorts words faster than dwords, and bytes */					\
	/* faster than words. Standard running time (O(4*n))is reduced to O(2*n) */				\
	/* for words and O(n) for bytes. Running time for floats depends on actual values... */	\
																							\
	/* Get first byte */																	\
	ubyte UniqueVal = *(((ubyte*)input)+pass);												\
																							\
	/* Check that byte's counter */															\
	if(CurCount[UniqueVal]==nb)	PerformPass=false;

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
 *	Constructor.
 */
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
RadixSort::RadixSort() : mRanks(null), mRanks2(null), mCurrentSize(0), mTotalCalls(0), mNbHits(0)
{
#ifndef RADIX_LOCAL_RAM
	// Allocate input-independent ram
	mHistogram	= new udword[256*4];
	mOffset		= new udword[256];
#endif
	// Initialize indices
	INVALIDATE_RANKS;
}

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
 *	Destructor.
 */
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
RadixSort::~RadixSort()
{
	// Release everything
#ifndef RADIX_LOCAL_RAM
	DELETEARRAY(mOffset);
	DELETEARRAY(mHistogram);
#endif
	DELETEARRAY(mRanks2);
	DELETEARRAY(mRanks);
}

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
 *	Resizes the inner lists.
 *	\param		nb	[in] new size (number of dwords)
 *	\return		true if success
 */
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
bool RadixSort::Resize(udword nb)
{
	// Free previously used ram
	DELETEARRAY(mRanks2);
	DELETEARRAY(mRanks);

	// Get some fresh one
	mRanks	= new udword[nb];	CHECKALLOC(mRanks);
	mRanks2	= new udword[nb];	CHECKALLOC(mRanks2);

	return true;
}

inline_ void RadixSort::CheckResize(udword nb)
{
	udword CurSize = CURRENT_SIZE;
	if(nb!=CurSize)
	{
		if(nb>CurSize)	Resize(nb);
		mCurrentSize = nb;
		INVALIDATE_RANKS;
	}
}

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
 *	Main sort routine.
 *	This one is for integer values. After the call, mRanks contains a list of indices in sorted order, i.e. in the order you may process your data.
 *	\param		input	[in] a list of integer values to sort
 *	\param		nb		[in] number of values to sort, must be < 2^31
 *	\param		hint	[in] RADIX_SIGNED to handle negative values, RADIX_UNSIGNED if you know your input buffer only contains positive values
 *	\return		Self-Reference
 */
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
RadixSort& RadixSort::Sort(const udword* input, udword nb, RadixHint hint)
{
	// Checkings
	if(!input || !nb || nb&0x80000000)	return *this;

	// Stats
	mTotalCalls++;

	// Resize lists if needed
	CheckResize(nb);

#ifdef RADIX_LOCAL_RAM
	// Allocate histograms & offsets on the stack
	udword mHistogram[256*4];
//	udword mOffset[256];
	udword* mLink[256];
#endif

	// Create histograms (counters). Counters for all passes are created in one run.
	// Pros:	read input buffer once instead of four times
	// Cons:	mHistogram is 4Kb instead of 1Kb
	// We must take care of signed/unsigned values for temporal coherence.... I just
	// have 2 code paths even if just a single opcode changes. Self-modifying code, someone?
	if(hint==RADIX_UNSIGNED)	{ CREATE_HISTOGRAMS(udword, input);	}