emhwlib_properties_6000.h

Sigma SMP8634 Mrua v. 2.8.2.0

	RMDispDigitalOutPropertyID_PadsConfig = 6094,
	/** DispDigitalOut_InputPadsConfig_type, (R/W) @par 
		Several input options - OBSOLETE, use PadsControl/QueryPadsControl instead! */
	RMDispDigitalOutPropertyID_InputPadsConfig = 6095,
	/** DispDigitalOut_PadsControl_type, (W) @par 
		Several options for the digital input and output ports */
	RMDispDigitalOutPropertyID_PadsControl = 6202,
	/** DispDigitalOut_QueryPadsControl_in_type and DispDigitalOut_QueryPadsControl_out_type, (R/W Exchange) @par 
		Get the current state of several options for the digital input and output ports */
	RMDispDigitalOutPropertyID_QueryPadsControl = 6203,
	/** ::void, (W) @par 
		Trigger an update of the xtal counter values for VSyncTimes. Need to be followed by a Validate call. */
	RMDispDigitalOutPropertyID_UpdateVSyncTimes = 6209,
	/** DispDigitalOut_VSyncTimes_type, (R) @par 
		Retreive the xtal counter value at the time of each input and output vsync resp. frame start */
	RMDispDigitalOutPropertyID_VSyncTimes = 6208,
};

/** Module Enum Default */
enum RMDispMainAnalogOutPropertyID {
	/** ::RMbool, (R/W) @par 
		Defines if the SD input signal is oversampled 2 times */
	RMDispMainAnalogOutPropertyID_EnableSDTVInput2xOversample = 6107,
	/** ::RMbool, (R/W) @par 
		Saves energy! */
	RMDispMainAnalogOutPropertyID_EnableSync = 6108,
	/** ::RMbool, (R/W) @par 
		Blackout the picture */
	RMDispMainAnalogOutPropertyID_EnablePicture = 6109,
	/** ::enum EMhwlibSharpnessControl, (R/W) @par 
		Sharpness/Notch filter allows to scale the luma amplitude around the chroma carrier frequency. A complete notch is performed by setting to 0 the luma amplitude around the chroma carrier frequency. Sharpness is done by amplifying luma amplitude on its high frequency (the high frequency is the chroma carrier frequency) */
	RMDispMainAnalogOutPropertyID_Sharpness = 6110,
	/** ::enum EMhwlibChromaFilter, (R/W) @par 
		Sets/Gets the Chroma filter */
	RMDispMainAnalogOutPropertyID_ChromaFilter = 6111,
	/** ::enum EMhwlibLumaFilter, (R/W) @par 
		Sets/Gets the Luma filter */
	RMDispMainAnalogOutPropertyID_LumaFilter = 6112,
	/** ::enum EMhwlibColorSpace, (R/W) @par 
		Enum Default; */
	RMDispMainAnalogOutPropertyID_ColorSpaceCVBS = 6113,
};

/** Module Enum Default */
enum RMDispComponentOutPropertyID {
	/** ::RMbool, (R/W) @par 
		Defines if the SD input signal is oversampled 2 times */
	RMDispComponentOutPropertyID_EnableSDTVInput2xOversample = 6114,
	/** ::RMbool, (R/W) @par 
		Saves energy! */
	RMDispComponentOutPropertyID_EnableSync = 6115,
	/** ::RMbool, (R/W) @par 
		Blackout the picture */
	RMDispComponentOutPropertyID_EnablePicture = 6116,
	/** ::enum EMhwlibChromaFilter, (R/W) @par 
		Sets/Gets the Chroma filter */
	RMDispComponentOutPropertyID_ChromaFilter = 6117,
	/** ::enum EMhwlibLumaFilter, (R/W) @par 
		Sets/Gets the Luma filter */
	RMDispComponentOutPropertyID_LumaFilter = 6118,
};

/** Module Enum Default */
enum RMDispCompositeOutPropertyID {
	/** ::RMbool, (R/W) @par 
		Defines if the SD input signal is oversampled 2 times */
	RMDispCompositeOutPropertyID_EnableSDTVInput2xOversample = 6119,
	/** ::RMbool, (R/W) @par 
		Saves energy! */
	RMDispCompositeOutPropertyID_EnableSync = 6120,
	/** ::RMbool, (R/W) @par 
		Blackout the picture */
	RMDispCompositeOutPropertyID_EnablePicture = 6121,
	/** ::enum EMhwlibSharpnessControl, (R/W) @par 
		Sharpness/Notch filter allows to scale the luma amplitude around the chroma carrier frequency. A complete notch is performed by setting to 0 the luma amplitude around the chroma carrier frequency. Sharpness is done by amplifying luma amplitude on its high frequency (the high frequency is the chroma carrier frequency) */
	RMDispCompositeOutPropertyID_Sharpness = 6122,
	/** ::enum EMhwlibChromaFilter, (R/W) @par 
		Sets/Gets the Chroma filter */
	RMDispCompositeOutPropertyID_ChromaFilter = 6123,
	/** ::enum EMhwlibLumaFilter, (R/W) @par 
		Sets/Gets the Luma filter */
	RMDispCompositeOutPropertyID_LumaFilter = 6124,
};

/** Module Enum Default */
enum RMDemuxEnginePropertyID {
	RMDemuxEngine_unused = 0, 
};

/** Module Enum Default */
enum RMMpegEnginePropertyID {
	RMMpegEngine_unused = 0, 
};

/** Module Enum Default */
enum RMVideoDecoderPropertyID {
	/** ::RMuint32, (R) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_FrameCounter = 6132,
	/** ::RMbool, (W) @par 
		If FALSE, video decoder skips all frames until first SequenceHeader/VOL in stream. If TRUE video decoder starts decoding from the first IFrame in stream, using the previous stored SequenceHeader/VOL. It should be set after video stop and before video play. After video stop the decoder modifies it to FALSE. */
	RMVideoDecoderPropertyID_StorePreviousVideoHeader = 6133,
	/** ::struct VideoDecoder_NextPicture_type, (R) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_PeekNextPicture = 6134,
	/** VideoDecoder_ConnectReader_in_type and VideoDecoder_ConnectReader_out_type, (R/W Exchange) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_ConnectReader = 6135,
	/** ::void, (W) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_DisconnectReader = 6136,
	/** ::RMuint32, (W) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_ReleasePicture = 6137,
	/** ::RMuint32, (W) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_AcquirePicture = 6138,
	/** ::RMuint32, (W) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_KeepPictureBeforeFlushing = 6139,
	/** ::void, (W) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_FlushReaderDisplayFIFO = 6140,
	/** ::struct VideoDecoder_NextPicture_type, (R) @par 
		Enum Default; */
	RMVideoDecoderPropertyID_NextPicture = 6141,
	/** ::struct EMhwlibActiveFormatDescription, (R) @par 
		Returns the current active format (extracted from the user data) and the picture aspect ratio of the encoded frame. */
	RMVideoDecoderPropertyID_ActiveFormat = 6192,
};

/** This module provides access to the Audio DSP specific functionalities */
enum RMAudioEnginePropertyID {
	RMAudioEngine_unused = 0, 
};

/** This module provides access to the Audio decoder settings */
enum RMAudioDecoderPropertyID {
	/** ::RMuint32, (R) @par 
		Enum Default; */
	RMAudioDecoderPropertyID_CurrentPTS = 6143,
	/** AudioDecoder_SynchroniseAudioWithDisplayPTS_type, (W) @par 
		Enum Default; */
	RMAudioDecoderPropertyID_SynchroniseAudioWithDisplayPTS = 6145,
	/** AudioDecoder_AudioPlayTime_type, (W) @par 
		Enum Default; */
	RMAudioDecoderPropertyID_AudioPlayTime = 6187,
	/** AudioDecoder_AudioBDJPanning_type, (W) @par 
		BDJ panning parameter in (x, y) coordinate. */
	RMAudioDecoderPropertyID_AudioBDJPanning = 6199,
	/** AudioDecoder_AudioBDJGain_type, (W) @par 
		BDJ gain parameter [-51dB to +12dB], Note:-51=-OO, -50=-50dB and so on. */
	RMAudioDecoderPropertyID_AudioBDJGain = 6200,
	/** AudioDecoder_AudioControlPCMX_type, (R/W) @par 
		PCMX decoder control (0:nothing change, 1: to flush bts fifo, 2:EOS Signal). */
	RMAudioDecoderPropertyID_AudioControlPCMX = 6207,
};

/** This module provides access to the Audio decoder settings */
enum RMAudioCapturePropertyID {
	RMAudioCapture_unused = 0, 
};

/** This module provides access to the Voip codec settings */
enum RMVoipCodecPropertyID {
	RMVoipCodec_unused = 0, 
};

/** Module Enum Default */
enum RMCRCDecoderPropertyID {
	RMCRCDecoder_unused = 0, 
};

/** Module Enum Default */
enum RMXCRCDecoderPropertyID {
	RMXCRCDecoder_unused = 0, 
};

/** Module Enum Default */
enum RMStreamCapturePropertyID {
	RMStreamCapture_unused = 0, 
};

/** Module Enum Default */
enum RMRawDataTransferPropertyID {
	RMRawDataTransfer_unused = 0, 
};

/** Module Enum Default */
enum RMI2CPropertyID {
	/** I2C_DeviceParams_type, (R/W) @par 
		Obsolete, use DeviceParameter / QueryDeviceParameter instead! */
	RMI2CPropertyID_DeviceParams = 6146,
	/** ::struct EMhwlibI2CDeviceParameter, (W) @par 
		Enum Default; */
	RMI2CPropertyID_DeviceParameter = 6205,
	/** I2C_QueryDeviceParameter_in_type and I2C_QueryDeviceParameter_out_type, (R/W Exchange) @par 
		Enum Default; */
	RMI2CPropertyID_QueryDeviceParameter = 6206,
	/** I2C_WriteRMuint8_type, (W) @par 
		Enum Default; */
	RMI2CPropertyID_WriteRMuint8 = 6147,
	/** I2C_QueryRMuint8_in_type and I2C_QueryRMuint8_out_type, (R/W Exchange) @par 
		Enum Default; */
	RMI2CPropertyID_QueryRMuint8 = 6148,
	/** ::RMuint8, (R/W) @par 
		Enum Default; */
	RMI2CPropertyID_RMuint8Access_NoSubAddress = 6149,
	/** I2C_WriteData_type, (W) @par 
		Enum Default; */
	RMI2CPropertyID_WriteData = 6150,
	/** I2C_QueryData_in_type and I2C_QueryData_out_type, (R/W Exchange) @par 
		Enum Default; */
	RMI2CPropertyID_QueryData = 6151,
	/** I2C_SelectSegment_type, (W) @par 
		Enum Default; */
	RMI2CPropertyID_SelectSegment = 6152,
	/** I2C_Send_type, (W) @par 
		Send a single byte over I2C */
	RMI2CPropertyID_Send = 6214,
	/** I2C_Read_in_type and I2C_Read_out_type, (R/W Exchange) @par 
		Read a single byte from I2C */
	RMI2CPropertyID_Read = 6215,
	/** I2C_SendData_type, (W) @par 
		Send multiple bytes (burst transfer, up to 256 bytes) */
	RMI2CPropertyID_SendData = 6216,
	/** I2C_ReadData_in_type and I2C_ReadData_out_type, (R/W Exchange) @par 
		Read multiple bytes (burst transfer, up to 256 bytes) */
	RMI2CPropertyID_ReadData = 6217,
	/** I2C_SendLargeData_type, (W) @par 
		Send multiple bytes (burst transfer, up to 64k bytes) */
	RMI2CPropertyID_SendLargeData = 6218,
	/** I2C_ReadLargeData_in_type and I2C_ReadLargeData_out_type, (R/W Exchange) @par 
		Read multiple bytes (burst transfer, up to 64k bytes) */
	RMI2CPropertyID_ReadLargeData = 6219,
	/** I2C_SetSegment_type, (W) @par 
		Set a segment pointer in an I2C device */
	RMI2CPropertyID_SetSegment = 6220,
	/** ::RMbool, (R/W) @par 
		Get: returns TRUE on chips with a burst write bug; Set: TRUE disables burst write, performs single byte writes instead */
	RMI2CPropertyID_BurstPatch = 6211,
};

/** Module Enum Default */
enum RMGFXEnginePropertyID {
	RMGFXEngine_unused = 0, 
};

/** Module Enum Default */
enum RMMMPropertyID {
	RMMM_unused = 0, 
};