hysteresis_grid0.mdl

This file is hysterisis two level controller

      gainval		      "1.0"
      ExternalReset	      "none"
      InitialConditionSource  "internal"
      InitialCondition	      "0"
      InitialConditionMode    "State and output"
      SampleTime	      "1"
      OutDataTypeMode	      "Inherit via internal rule"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	off
      LimitOutput	      off
      UpperSaturationLimit    "inf"
      LowerSaturationLimit    "-inf"
      ShowSaturationPort      off
      ShowStatePort	      off
      IgnoreLimit	      off
      StateMustResolveToSignalObject off
      RTWStateStorageClass    "Auto"
    }
    Block {
      BlockType		      EnablePort
      StatesWhenEnabling      "held"
      ShowOutputPort	      off
      ZeroCross		      on
    }
    Block {
      BlockType		      From
      IconDisplay	      "Tag"
    }
    Block {
      BlockType		      Fcn
      Expr		      "sin(u[1])"
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Gain
      Gain		      "1"
      Multiplication	      "Element-wise(K.*u)"
      ParameterDataTypeMode   "Same as input"
      ParameterDataType	      "sfix(16)"
      ParameterScalingMode    "Best Precision: Matrix-wise"
      ParameterScaling	      "2^0"
      OutDataTypeMode	      "Same as input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Goto
      IconDisplay	      "Tag"
    }
    Block {
      BlockType		      Ground
    }
    Block {
      BlockType		      Inport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      LatchByDelayingOutsideSignal off
      LatchByCopyingInsideSignal off
      Interpolate	      on
    }
    Block {
      BlockType		      Logic
      Operator		      "AND"
      Inputs		      "2"
      AllPortsSameDT	      on
      OutDataTypeMode	      "Logical (see Configuration Parameters: Optimiza"
"tion)"
      LogicDataType	      "uint(8)"
      SampleTime	      "-1"
    }
    Block {
      BlockType		      MATLABFcn
      MATLABFcn		      "sin"
      OutputDimensions	      "-1"
      OutputSignalType	      "auto"
      Output1D		      on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Mux
      Inputs		      "4"
      DisplayOption	      "none"
      UseBusObject	      off
      BusObject		      "BusObject"
      NonVirtualBus	      off
    }
    Block {
      BlockType		      Outport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      OutputWhenDisabled      "held"
      InitialOutput	      "[]"
    }
    Block {
      BlockType		      PMComponent
      SubClassName	      "unknown"
    }
    Block {
      BlockType		      PMIOPort
    }
    Block {
      BlockType		      Product
      Inputs		      "2"
      Multiplication	      "Element-wise(.*)"
      InputSameDT	      on
      OutDataTypeMode	      "Same as first input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Zero"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Relay
      OnSwitchValue	      "eps"
      OffSwitchValue	      "eps"
      OnOutputValue	      "1"
      OffOutputValue	      "0"
      OutputDataTypeScalingMode	"All ports same datatype"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      ConRadixGroup	      "Use specified scaling"
      ZeroCross		      on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Saturate
      UpperLimit	      "0.5"
      LowerLimit	      "-0.5"
      LinearizeAsGain	      on
      ZeroCross		      on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Scope
      ModelBased	      off
      TickLabels	      "OneTimeTick"
      ZoomMode		      "on"
      Grid		      "on"
      TimeRange		      "auto"
      YMin		      "-5"
      YMax		      "5"
      SaveToWorkspace	      off
      SaveName		      "ScopeData"
      LimitDataPoints	      on
      MaxDataPoints	      "5000"
      Decimation	      "1"
      SampleInput	      off
      SampleTime	      "-1"
    }
    Block {
      BlockType		      "S-Function"
      FunctionName	      "system"
      SFunctionModules	      "''"
      PortCounts	      "[]"
    }
    Block {
      BlockType		      SubSystem
      ShowPortLabels	      on
      Permissions	      "ReadWrite"
      PermitHierarchicalResolution "All"
      SystemSampleTime	      "-1"
      RTWFcnNameOpts	      "Auto"
      RTWFileNameOpts	      "Auto"
      SimViewingDevice	      off
      DataTypeOverride	      "UseLocalSettings"
      MinMaxOverflowLogging   "UseLocalSettings"
    }
    Block {
      BlockType		      Sum
      IconShape		      "rectangular"
      Inputs		      "++"
      InputSameDT	      on
      OutDataTypeMode	      "Same as first input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Switch
      Criteria		      "u2 >= Threshold"
      Threshold		      "0"
      InputSameDT	      on
      OutDataTypeMode	      "Inherit via internal rule"
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      ZeroCross		      on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Terminator
    }
    Block {
      BlockType		      ToWorkspace
      VariableName	      "simulink_output"
      MaxDataPoints	      "1000"
      Decimation	      "1"
      SampleTime	      "0"
      FixptAsFi		      off
    }
    Block {
      BlockType		      UnitDelay
      X0		      "0"
      SampleTime	      "1"
      StateMustResolveToSignalObject off
      RTWStateStorageClass    "Auto"
    }
  }
  AnnotationDefaults {
    HorizontalAlignment	    "center"
    VerticalAlignment	    "middle"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    FontName		    "Helvetica"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  LineDefaults {
    FontName		    "Helvetica"
    FontSize		    9
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  System {
    Name		    "hysteresis_grid0"
    Location		    [2, 82, 1278, 972]
    Open		    on
    ModelBrowserVisibility  off
    ModelBrowserWidth	    200
    ScreenColor		    "white"
    PaperOrientation	    "landscape"
    PaperPositionMode	    "auto"
    PaperType		    "usletter"
    PaperUnits		    "inches"
    ZoomFactor		    "100"
    ReportName		    "simulink-default.rpt"
    Block {
      BlockType		      Reference
      Name		      "3-phase \nInstantaneous \nActive & Reactive Pow"
"er"
      Ports		      [2, 1]
      Position		      [540, 379, 590, 426]
      FontSize		      10
      SourceBlock	      "powerlib_extras/Measurements/3-phase \nInstanta"
"neous \nActive & Reactive Power"
      SourceType	      "3-phase instantaneous active and reactive power"
      ShowPortLabels	      on
    }
    Block {
      BlockType		      Reference
      Name		      "3-phase \nInstantaneous \nActive & Reactive Pow"
"er1"
      Ports		      [2, 1]
      Position		      [535, 794, 585, 841]
      FontSize		      10
      SourceBlock	      "powerlib_extras/Measurements/3-phase \nInstanta"
"neous \nActive & Reactive Power"
      SourceType	      "3-phase instantaneous active and reactive power"
      ShowPortLabels	      on
    }
    Block {
      BlockType		      SubSystem
      Name		      "Controlador de corriente \nde hysteresis"
      Ports		      [0, 1]
      Position		      [115, 51, 180, 99]
      ForegroundColor	      "blue"
      BackgroundColor	      "cyan"
      FontName		      "Arial"
      FontWeight	      "bold"
      TreatAsAtomicUnit	      off
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      MaskHideContents	      off
      System {
	Name			"Controlador de corriente \nde hysteresis"
	Location		[2, 86, 1270, 752]
	Open			on
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"usletter"
	PaperUnits		"inches"
	ZoomFactor		"100"
	Block {
	  BlockType		  SubSystem
	  Name			  "Current\nRegulator"
	  Ports			  [2, 1]
	  Position		  [300, 55, 360, 115]
	  BackgroundColor	  "lightBlue"
	  TreatAsAtomicUnit	  off
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  MaskHideContents	  off
	  MaskType		  "Regulateur de courant a hysteresis"
	  MaskPromptString	  "Hysteresis band (A)"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "h=@1;"
	  MaskIconFrame		  on
	  MaskIconOpaque	  off
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "10"
	  System {
	    Name		    "Current\nRegulator"
	    Location		    [251, 575, 715, 769]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "Iabc"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "Iabc*"
	      Position		      [25, 128, 55, 142]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      DataTypeConversion
	      Name		      "Data Type \nConversion"
	      Position		      [260, 44, 280, 66]
	      ShowName		      off
	      OutDataTypeMode	      "boolean"
	    }
	    Block {
	      BlockType		      DataTypeConversion
	      Name		      "Data Type \nConversion1"
	      Position		      [345, 44, 365, 66]
	      ShowName		      off
	      OutDataTypeMode	      "double"
	    }
	    Block {
	      BlockType		      DataTypeConversion
	      Name		      "Data Type \nConversion2"
	      Position		      [345, 94, 365, 116]
	      ShowName		      off
	      OutDataTypeMode	      "double"
	    }
	    Block {
	      BlockType		      DataTypeConversion
	      Name		      "Data Type \nConversion3"
	      Position		      [345, 144, 365, 166]
	      ShowName		      off
	      OutDataTypeMode	      "double"
	    }
	    Block {
	      BlockType		      DataTypeConversion
	      Name		      "Data Type \nConversion4"
	      Position		      [250, 94, 270, 116]
	      ShowName		      off
	      OutDataTypeMode	      "boolean"
	    }
	    Block {
	      BlockType		      DataTypeConversion
	      Name		      "Data Type \nConversion5"
	      Position		      [250, 144, 270, 166]
	      ShowName		      off
	      OutDataTypeMode	      "boolean"
	    }
	    Block {
	      BlockType		      Demux
	      Name		      "Demux1"
	      Ports		      [1, 3]
	      Position		      [85, 20, 90, 60]
	      ShowName		      off
	      Outputs		      "3"
	    }
	    Block {
	      BlockType		      Demux
	      Name		      "Demux2"
	      Ports		      [1, 3]
	      Position		      [85, 115, 90, 155]
	      ShowName		      off
	      Outputs		      "3"
	    }
	    Block {
	      BlockType		      Logic
	      Name		      "Logical\nOperator"
	      Ports		      [1, 1]
	      Position		      [295, 45, 325, 65]
	      ShowName		      off
	      Operator		      "NOT"
	    }
	    Block {
	      BlockType		      Logic
	      Name		      "Logical\nOperator1"
	      Ports		      [1, 1]
	      Position		      [290, 95, 320, 115]
	      ShowName		      off
	      Operator		      "NOT"
	    }
	    Block {
	      BlockType		      Logic
	      Name		      "Logical\nOperator2"
	      Ports		      [1, 1]
	      Position		      [290, 145, 320, 165]
	      ShowName		      off
	      Operator		      "NOT"
	    }
	    Block {
	      BlockType		      Mux
	      Name		      "Mux"
	      Ports		      [6, 1]
	      Position		      [400, 15, 405, 170]
	      ShowName		      off
	      Inputs		      "6"
	    }
	    Block {
	      BlockType		      Relay
	      Name		      "Relay"
	      Position		      [200, 17, 220, 43]
	      ShowName		      off
	      OnSwitchValue	      "h/2"
	      OffSwitchValue	      "-h/2"
	    }
	    Block {
	      BlockType		      Relay
	      Name		      "Relay1"
	      Position		      [200, 67, 220, 93]
	      ShowName		      off
	      OnSwitchValue	      "h/2"
	      OffSwitchValue	      "-h/2"
	    }
	    Block {
	      BlockType		      Relay
	      Name		      "Relay2"
	      Position		      [200, 117, 220, 143]
	      ShowName		      off
	      OnSwitchValue	      "h/2"
	      OffSwitchValue	      "-h/2"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum"
	      Ports		      [2, 1]
	      Position		      [160, 19, 180, 41]
	      ShowName		      off
	      Inputs		      "-+"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum1"