ch8_matrix.fit.qmsg

用fpga+usb显现的4通道800K的数据采集方案。

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.0 Build 33 02/05/2007 SJ Full Version " "Info: Version 7.0 Build 33 02/05/2007 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Wed Jun 04 13:12:09 2008 " "Info: Processing started: Wed Jun 04 13:12:09 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off CH8_Matrix -c CH8_Matrix " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off CH8_Matrix -c CH8_Matrix" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "CH8_Matrix EP2C70F896C8 " "Info: Selected device EP2C70F896C8 for design \"CH8_Matrix\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0}
{ "Info" "ITAN_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0}
{ "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_TOP" "1 0 " "Info: The Fitter has identified 1 logical partitions of which 0 have a previous placement to use" { { "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_NONE_OVERRIDE" "249 Top " "Info: Previous placement does not exist for 249 of 249 atoms in partition Top" {  } {  } 0 0 "Previous placement does not exist for %1!d! of %1!d! atoms in partition %2!s!" 0 0}  } {  } 0 0 "The Fitter has identified %1!d! logical partitions of which %2!d! have a previous placement to use" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C70F896I8 " "Info: Device EP2C70F896I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ G7 " "Info: Pin ~ASDO~ is reserved at location G7" {  } {  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ K9 " "Info: Pin ~nCSO~ is reserved at location K9" {  } {  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS69n/DEV_CLRn~ D4 " "Info: Pin ~LVDS69n/DEV_CLRn~ is reserved at location D4" {  } {  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0}
{ "Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "2 46 " "Warning: No exact pin location assignment(s) for 2 pins of 46 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "TB_MIX " "Info: Pin TB_MIX not assigned to an exact location on the device" {  } { { "CH8_Matrix.bdf" "" { Schematic "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/CH8_Matrix.bdf" { { -392 1096 1272 -376 "TB_MIX" "" } } } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { TB_MIX } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { TB_MIX } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "flagb " "Info: Pin flagb not assigned to an exact location on the device" {  } { { "CH8_Matrix.bdf" "" { Schematic "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/CH8_Matrix.bdf" { { -464 496 664 -448 "flagb" "" } } } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { flagb } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { flagb } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "CLK_40M (placed in PIN T2 (CLK2, LVDSCLK1p, Input)) " "Info: Automatically promoted node CLK_40M (placed in PIN T2 (CLK2, LVDSCLK1p, Input))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G3 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G3" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0}  } { { "CH8_Matrix.bdf" "" { Schematic "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/CH8_Matrix.bdf" { { -392 -616 -448 -376 "CLK_40M" "" } } } } { "d:/program files/quartusii/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/program files/quartusii/quartus/bin/Assignment Editor.qase" 1 { { 0 "CLK_40M" } } } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { CLK_40M } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { CLK_40M } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "div_mult:inst8\|counter\[0\]  " "Info: Automatically promoted node div_mult:inst8\|counter\[0\] " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "div_mult:inst8\|counter\[1\]~41 " "Info: Destination node div_mult:inst8\|counter\[1\]~41" {  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[1]~41 } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[1]~41 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "div_mult:inst8\|counter\[0\]~50 " "Info: Destination node div_mult:inst8\|counter\[0\]~50" {  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[0]~50 } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[0]~50 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0}  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[0] } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[0] } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "gating_pulse:inst\|Get_CLK  " "Info: Automatically promoted node gating_pulse:inst\|Get_CLK " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0}  } { { "gating_pulse.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/gating_pulse.v" 3 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { gating_pulse:inst|Get_CLK } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { gating_pulse:inst|Get_CLK } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "div_mult:inst8\|counter\[8\]  " "Info: Automatically promoted node div_mult:inst8\|counter\[8\] " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "div_mult:inst8\|counter\[8\]~34 " "Info: Destination node div_mult:inst8\|counter\[8\]~34" {  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[8]~34 } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[8]~34 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0}  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[8] } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst8|counter[8] } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}