⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c.svn-base

📁 u-boot for S3c2443 processor
💻 SVN-BASE
字号:
/* * Copyright (C) 2003 Motorola Inc. * Xianghua Xiao (x.xiao@motorola.com) * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA *//* * PCI Configuration space access support for MPC85xx PCI Bridge */#include <common.h>#include <asm/cpm_85xx.h>#include <pci.h>#if defined(CONFIG_PCI)/* * Initialize PCI Devices, report devices found. */#ifndef CONFIG_PCI_PNPstatic struct pci_config_table pci_mpc85xxads_config_table[] = {	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_IDSEL_NUMBER, PCI_ANY_ID,	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,				       PCI_ENET0_MEMADDR,				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},	{ }};#endifstruct pci_controller local_hose = {#ifndef CONFIG_PCI_PNP	config_table: pci_mpc85xxads_config_table,#endif};void pci_init_board(void){    struct pci_controller* hose = (struct pci_controller *)&local_hose;    volatile immap_t    *immap = (immap_t *)CFG_CCSRBAR;    volatile ccsr_pcix_t *pcix = &immap->im_pcix;    u16 reg16;    hose->first_busno = 0;    hose->last_busno = 0xff;    pci_set_region(hose->regions + 0,	CFG_PCI_MEM_BASE,	CFG_PCI_MEM_PHYS,	(CFG_PCI_MEM_SIZE/2),	PCI_REGION_MEM);    pci_set_region(hose->regions + 1,	(CFG_PCI_MEM_BASE+0x08000000),	(CFG_PCI_MEM_PHYS+0x08000000),	0x1000000, /* 16M */	PCI_REGION_IO);    hose->region_count = 2;    pci_setup_indirect(hose,	(CFG_IMMR+0x8000),	(CFG_IMMR+0x8004));    pci_register_hose(hose);    hose->last_busno = pci_hose_scan(hose);    pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);    reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;    pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);    /* Clear non-reserved bits in status register */    pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);    pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);    pcix->potar1   = (CFG_PCI_MEM_BASE >> 12) & 0x000fffff;    pcix->potear1  = 0x00000000;    pcix->powbar1  = (CFG_PCI_MEM_BASE >> 12) & 0x000fffff;    pcix->powbear1 = 0x00000000;    pcix->powar1   = 0x8004401a; /* 128M MEM space */    pcix->potar2   = ((CFG_PCI_MEM_BASE + 0x08000000) >> 12)  & 0x000fffff;    pcix->potear2  = 0x00000000;    pcix->powbar2  = ((CFG_PCI_MEM_BASE + 0x08000000) >> 12) && 0x000fffff;    pcix->powbear2 = 0x00000000;    pcix->powar2   = 0x80088017; /* 16M IO  space */    pcix->pitar1 = 0x00000000;    pcix->piwbar1 = 0x00000000;    pcix->piwar1 = 0xa0F5501f;}#endif /* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -