docbdk.c

M-System DOC(Disk on a Chip) Flash芯片映像读写工具, 可以进行二片Flash芯片的内容互相拷贝, 提高烧录程序的效率.

                                sizeof(BootRecord)];
  VolumeRecord * volumePtr;

  DBG_PRINT_FLOW(FLZONE_BDK,"Flow: bdkMount() Entered.\r\n");

  if ((flBdkVol->bdkGlobalStatus & BDK_S_HEADER_FOUND)==0)/* header not found */
  {
#ifdef MTD_STANDALONE
	 FLFlash      *   flashPtr;

     checkStatus(bdkFindDiskOnChip((FLDword FAR2 *)&dwTemp,(FLDword FAR2 *)&dwTemp));	 
     DBG_PRINT_FLOW(FLZONE_BDK,"Flow: bdkMount() - DiskOnChip found.\r\n");
     /* flBdkVol->flash was initialized by bdkFindDiskOnChip */
	 flashPtr        = flBdkVol->flash; 
#endif /* MTD_STANDALONE */

     dwNoOfBlocks = (FLDword)(flashPtr->mediaSize >> flashPtr->erasableBlockSizeBits);     
     wUnitsPerChip = (FLWord)dwNoOfBlocks / flashPtr->noOfChips;
     flBdkVol->blockPerFloor = ((flashPtr->noOfChips +  flashPtr->noOfFloors - 1)/ 
                               flashPtr->noOfFloors) * wUnitsPerChip;
     flBdkVol->erasableBlockBits = flashPtr->erasableBlockSizeBits;
     flBdkVol->sectorsInUnitBits = (FLByte)flashPtr->erasableBlockSizeBits - FL_SECTOR_SIZE_BITS;
     flBdkVol->sectorsInUnitMask = (1 << flBdkVol->sectorsInUnitBits) - 1; 

     /* Set header signature acording to supported TLs*/

     if ((flashPtr->flags & SAFTL_ENABLED)==0)
     {
         DBG_PRINT_ERR(FLZONE_BDK,"Error: bdkMount() Unknown DiskOnChip device, therfore Binary partitions are not supported.\r\n");
         return( flFeatureNotSupported );
     }

     DBG_PRINT_FLOW(FLZONE_BDK,"SAFTL search for media header.\r\n");

     /* Find media header */
     checkStatus(bdkRetrieveHeader(headerBuffer));

     /* Perform the BB matching */
#ifdef MTD_READ_BBT
     checkStatus(bdkDefinePartition(headerBuffer));
#endif /* MTD_READ_BBT */

     volumePtr = (VolumeRecord *) (headerBuffer+sizeof(BootRecord));
     flBdkVol = flBdkVols + flNoOfPartitions;
     for (bMaxPartition = 0 ;(BINARY_PARTITIONS >= bMaxPartition + flNoOfPartitions) &&
          (LE4(volumePtr->flags) & BDK_SAFTL_BINARY) ; flBdkVol++,volumePtr++)
     {
         tffscpy(flBdkVol,flBdkVols + flNoOfPartitions,sizeof(BDKVol));
         flBdkVol->erasableBlockBits = flashPtr->erasableBlockSizeBits;
         flBdkVol->sectorsInUnitBits = (FLByte)flashPtr->erasableBlockSizeBits - FL_SECTOR_SIZE_BITS;
         flBdkVol->sectorsInUnitMask = (1 << flBdkVol->sectorsInUnitBits) - 1; 

         dwVolumeFlags = LE4(volumePtr->flags);
#ifndef FL_SKIP_ARGS_CHECK
#ifndef MTD_READ_BBT

	 if(dwVolumeFlags & BDK_SAFTL_ADVANCED_MATCHING)
	 {
	   if(bMaxPartition == 0)
	   {
	      DBG_PRINT_ERR(FLZONE_BDK,"ERROR - No SPL partition found - undefine NO_READ_BBT_CODE.\r\n\n");
	      return flBadFormat;
	   }
	   break;
	 }
#endif /* MTD_READ_BBT */
#endif /* FL_SKIP_ARGS_CHECK */
         flBdkVol->startPartitionBlock = (FLWord)LE4(volumePtr->firstUnit);
         flBdkVol->endPartitionBlock   = (FLWord)LE4(volumePtr->lastUnit);
#ifdef HW_PROTECTION
         flBdkVol->protectionArea = (FLByte)LE4(volumePtr->protectionArea);
         flBdkVol->protectionType = (FLWord)(dwVolumeFlags & 
                                             (PROTECTABLE | CHANGEABLE_PROTECTION));
#endif /* HW_PROTECTION */
        flHandleTable[flSocketNo][bMaxPartition] = flNoOfPartitions+bMaxPartition;
        bMaxPartition++;
        flBdkVol->bdkGlobalStatus  = BDK_S_DOC_FOUND | BDK_S_HEADER_FOUND;

        /* Find MTD flags and update unit size in case of forced reliable mode */
        if(dwVolumeFlags & BDK_SAFTL_NO_MATCHING)
        {
           flBdkVol->MTDFlags = MTD_NO_MATCHING;
        }
        else 
        {
           flBdkVol->MTDFlags = 0;
        }
        if(dwVolumeFlags & BDK_SAFTL_REL_PARTITION)
        {      
           if((dwVolumeFlags             & BDK_SAFTL_FAST_PARTITION) &&
			  (flashPtr->flashTechnology & FL_SUPPORT_FAST     ))
           {
              flBdkVol->MTDFlags |= MTD_REL_MODE | MTD_FAST_MODE; 
           }
           else if(flashPtr->flashTechnology & FL_SUPPORT_RELIABLE)
           {
              flBdkVol->MTDFlags |= MTD_REL_MODE;
           }

		   /* Reduce erasable block size */
           if((flashPtr->flashTechnology & FL_SUPPORT_MLC) &&
			  (flBdkVol->MTDFlags & MTD_REL_MODE        )    )
		   {
			  flBdkVol->sectorsInUnitBits--;
              flBdkVol->sectorsInUnitMask = (1L<<flBdkVol->sectorsInUnitBits)-1;
              flBdkVol->erasableBlockBits--; 
		   }
        }
     } /* End loop over the binary partitions and initializing them */
     flNoOfPartitions = (FLByte)(flNoOfPartitions + bMaxPartition);
  } /* End if this is the first time we mounted this media */

  /* set the current partition by changing the flBdkVol global pointer */
  if ((flPartitionNo>MAX_BINARY_PARTITIONS_PER_DRIVE) ||
      (flHandleTable[flSocketNo][flPartitionNo] == BDK_INVALID_VOLUME_HANDLE))
  {
     DBG_PRINT_FLOW(FLZONE_BDK,"Device is not formated the specified binary partition.\r\n");
     return flBadDriveHandle;
  }
  else
  {
    flBdkVol = &flBdkVols[flHandleTable[flSocketNo][flPartitionNo]];
  }
  DBG_PRINT_FLOW(FLZONE_BDK,"Flow: bdkMount() Exit.\r\n");
  return flOK;
}

#ifdef MTD_STANDALONE

#ifdef EXIT

/*-------------------------------------------------------------------
 *                         b d k E x i t
 *
 * Reset BDK variables and Free 'bdkWin' memory.
 *
 *  Parameters : None
 *
 *  global variable input :
 *     flBdkVol                  : current binary partition record
 *     flBdkVol->bdkGlobalStatus : Was DiskOnChip already found
 *
 *  global variable output :
 *     None
 *
 *  use functions:
 *       bdkInit                 : Clear all global data structures.
 *       flash->dismount         : Free dynamicaly allocated memory
 *
 * Return:
 *       None
 *-------------------------------------------------------------------*/

void bdkExit( void )
{
  DBG_PRINT_FLOW(FLZONE_BDK,"Flow: bdkExit() Entered.\r\n");
  if( flBdkVol->bdkGlobalStatus & BDK_S_DOC_FOUND )  /* DiskOnChip was found */
  {
    /* Free DiskOnChip memory window pointer - for virual memory platforms */
    freePointer(bdkWin,DOC_WIN);
#ifdef MTD_READ_BBT
    /* Free memory used y matching tables */
    if(flBdkVol->flash->dismount != NULL)
      flBdkVol->flash->dismount(flBdkVol->flash);
#endif /* MTD_READ_BBT */
  }
  bdkInit();
  DBG_PRINT_FLOW(FLZONE_BDK,"Flow: bdkExit() Exit.\r\n");
  FL_SYS_FUNC_RELEASE;
}

#endif /* EXIT */


/*--------------------------------------------------------------------------
 *                     b d k F i n d D i s k O n C h i p
 *
 *  Find DiskOnChip in the specified memory range and identify the flash
 *  media (initialize flash). Update 'docSize' and 'docAddress' according
 *  to the DiskOnChip size and address respectively.
 *
 *  Note : If the DiskOnChip location is known, specify the same address
 *         for DOC_LOW_ADDRESS and DOC_HIGH_ADDRESS. or use bdkSetDocWindow
 *
 *  Parameters : 'docAddress'      - pointer to the DiskOnChip address
 *               'docSize'         - pointer to the returned size
 *
 *  global variable input :
 *           flBdkVol                  - current binary partition record
 *           flBdkVol->bdkGlobalStatus - was this device found before
 *           bdkDocWindow              - if > 0 only this address will be checked
 *
 *  global variable output :
 *           flBdkVol->flash           - flash record enabling media I\O
 *           bdkGlobalStatus           - set to BDK_S_DOC_FOUND
 *           bdkDocWindow              - save physical window address
 *
 *  use functions:
 *       bdkInit                      - Init package data structures
 *       flRegisterDOCRam             - Register RAM MTD
 *       flRegisterDOCOREN            - Register OREN MTD
 *       Socket Initializetion        - Init socket(routine pointer is set by 
 *                                      registrarion of the socket)
 *       MTD Identify                 - Identify DOC (Routine pointers are set
 *                                      but registration of MTD)
 *
 *  Return:
 *      flOK                  - success
 *      other Non-zero value  - error returned from called functions.
 *
 * Routine for BDK stand alone package.
 *------------------------------------------------------------------------*/

FLStatus bdkFindDiskOnChip(FLDword FAR2 *docAddressPtr, FLDword FAR2 *docSizePtr )
{
  FLFlash    *flashPtr;
  FLSocket   *socketPtr;

  if(flInitStatus==FALSE)
      bdkInit();

  if ((flBdkVol->bdkGlobalStatus & BDK_S_DOC_FOUND) == 0) /* initialize MTD */
  {
      flBdkVol        = flBdkVols;
      flashPtr        = flFlashOf(0);
      socketPtr       = flSocketOf(0);
      flBdkVol->flash = flashPtr;

      checkStatus(flRegisterComponents());
      checkStatus(flIdentifyFlash(socketPtr,flashPtr));

      /* Identify flashPtr connected to the ASIC */
      flBdkVol->bdkDocWindow     = ((FLDword)flashPtr->socket->window.baseAddress << 12);
      flBdkVol->bdkGlobalStatus |= BDK_S_DOC_FOUND;
  } /* End if - first time this device was accessed */

  *docAddressPtr  = flBdkVol->bdkDocWindow;
  *docSizePtr     = flBdkVol->flash->mediaSize ;

  return flOK;
}

/*--------------------------------------------------------------------------
 *               b d k S e t B o o t P a r t i t i o n N o
 *
 *  Set current binary partiton pointer to a specific binary partition
 *
 *  Note : This routine is neccesay only for partitions > 0 .
 *
 *  Parameters : 'partitionNo'     - serial number of binary partition
 *
 *  global variable output :
 *           flPartitionNo  - changed to the current partition number.
 *
 *  use functions: bdkMount()
 *
 *  Return:
 *     flOK on success
 *     flBadParameter if BDK is not customized to support that many partitions.
 *
 * Routine for BDK stand alone package only.
 *------------------------------------------------------------------------*/

FLStatus bdkSetBootPartitionNo(FLByte bPartitionNo)
{
  FLStatus status;
  FLByte savedbPartitionNo;

  savedbPartitionNo = flPartitionNo;
  flPartitionNo     = bPartitionNo;
  status = bdkMount();
  if(status != flOK)
  {
    flPartitionNo = savedbPartitionNo;
    DBG_PRINT_ERR(FLZONE_BDK,"ERROR: Failed Setting BDK partiton.\r\n");
    DBG_PRINT_ERR_PRM(FLZONE_BDK,(FLTXT("       With status %d.\r\n"),status));
  }
  return status;
}


/*-------------------------------------------------------------------
 *                    b d k C h e c k S i g n O f f s e t
 *
 *  This routine is kept for backward compatability. Since SAFTL does not support
 * different signature offsets, the routine does nothing. It is in just to keep the 
 * old interface unchanged.
 *
 *  Parameters : 'signPtr'          - 4-character signature of storage units
 *
 *  global variable input :
 *           None
 *
 *  global variable output :
 *           None
 *
 *
 *  Return :
 *      flOK                - success
 *
 * Routine for BDK stand alone package only.
 *-------------------------------------------------------------------*/

FLStatus bdkCheckSignOffset( FLByte FAR2 *signPtr )
{