⭐ 欢迎来到虫虫下载站！ | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站
📤 上传资源

📄 mtel.s51

📁 cc2430讀取短地址程式
💻 S51
📖 第 1 页 / 共 5 页
字号:
🔍
12345 
        MOVX	@DPTR,A
        INC	DPTR
//  299   *msg++ = (byte)(LO_UINT16( cmd ));
        MOV	A,R2
        MOVX	@DPTR,A
        INC	DPTR
        INC	R6
        INC	R6
        MOV	R7,DPH
//  300 
//  301   if ( pData )
        MOV	A,?V0 + 0
        JNZ	??MT_BuildSPIMsg_0
        MOV	A,?V0 + 1
??MT_BuildSPIMsg_0:
        JZ	??MT_BuildSPIMsg_1
//  302   {
//  303     *msg++ = dataLen;
        MOV	A,R1
        MOVX	@DPTR,A
//  304 
//  305     msg = osal_memcpy( msg, pData, dataLen );
        ; Setup parameters for call to function osal_memcpy
        MOV	?V0 + 2,#0x0
        MOV	R0,#?V0 + 0
        LCALL	?PUSH_XSTACK_I_THREE
        CFI CFA_XSP16 add(XSP16, 17)
        MOV	A,R1
        MOV	R4,A
        MOV	R5,#0x0
        MOV	DPL,R6
        MOV	DPH,R7
        INC	DPTR
        MOV	R2,DPL
        MOV	R3,DPH
        MOV	DPTR,#(osal_memcpy & 0xffff)
        MOV	A,#((osal_memcpy >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	A,#0x3
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 14)
        MOV	?V0 + 0,R2
        MOV	?V0 + 1,R3
        MOV	R6,?V0 + 0
        MOV	R7,?V0 + 1
        SJMP	??MT_BuildSPIMsg_2
//  306   }
//  307   else
//  308     *msg++ = 0;
??MT_BuildSPIMsg_1:
        CLR	A
        MOVX	@DPTR,A
        INC	DPTR
        INC	R6
        MOV	R7,DPH
//  309 
//  310   *msg = SPIMgr_CalcFCS( msgPtr, (byte)(3 + dataLen) );
??MT_BuildSPIMsg_2:
        ; Setup parameters for call to function SPIMgr_CalcFCS
        MOV	A,#0x3
        ADD	A,?V0 + 3
        MOV	R1,A
        MOV	R2,?V0 + 4
        MOV	R3,?V0 + 5
        MOV	DPTR,#(SPIMgr_CalcFCS & 0xffff)
        MOV	A,#((SPIMgr_CalcFCS >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	A,R1
        MOV	DPL,R6
        MOV	DPH,R7
        MOVX	@DPTR,A
//  311 }
        SJMP	??Subroutine17_0
        CFI EndBlock cfiBlock3

        RSEG BANKED_CODE:CODE:NOROOT(0)
?Subroutine17:
        CFI Block cfiBlock4 Using cfiCommon0
        CFI NoFunction
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 15)
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI Invalid
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 14)
        CFI Valid
??Subroutine17_0:
        MOV	R7,#0x6
        LJMP	?BANKED_LEAVE_XDATA
        CFI EndBlock cfiBlock4
//  312 #endif
//  313 
//  314 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
//  315 /*********************************************************************
//  316  * @fn      MT_BuildAndSendZToolResponse
//  317  *
//  318  * @brief
//  319  *
//  320  *   Build and send a ZTOOL msg
//  321  *
//  322  * @param   byte err
//  323  *
//  324  * @return  void
//  325  */

        RSEG BANKED_CODE:CODE:NOROOT(0)
//  326 void MT_BuildAndSendZToolResponse( byte msgLen, uint16 cmd,
MT_BuildAndSendZToolResponse:
        CFI Block cfiBlock5 Using cfiCommon0
        CFI Function MT_BuildAndSendZToolResponse
//  327                                    byte dataLen, byte *pData )
//  328 {
        FUNCALL MT_BuildAndSendZToolResponse, osal_mem_alloc
        LOCFRAME XSTACK, 16, STACK
        ARGFRAME XSTACK, 16, STACK
        FUNCALL MT_BuildAndSendZToolResponse, MT_BuildSPIMsg
        LOCFRAME XSTACK, 18, STACK
        ARGFRAME XSTACK, 18, STACK
        FUNCALL MT_BuildAndSendZToolResponse, HalUARTWrite
        LOCFRAME XSTACK, 16, STACK
        ARGFRAME XSTACK, 16, STACK
        FUNCALL MT_BuildAndSendZToolResponse, osal_mem_free
        LOCFRAME XSTACK, 16, STACK
        ARGFRAME XSTACK, 16, STACK
        MOV	A,#-0x10
        LCALL	?BANKED_ENTER_XDATA
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V7 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI V6 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-15)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-16)))
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 16)
        ; Saved register size: 16
        ; Auto size: 0
        MOV	?V0 + 2,R1
        MOV	?V0 + 6,R2
        MOV	?V0 + 7,R3
        MOV	?V0 + 3,R4
        MOV	A,#0x10
        LCALL	?XSTACK_DISP0_8
        MOVX	A,@DPTR
        MOV	?V0 + 0,A
        INC	DPTR
        MOVX	A,@DPTR
        MOV	?V0 + 1,A
//  329   byte *msg_ptr;
//  330 
//  331   // Get a message buffer to build response message
//  332   msg_ptr = osal_mem_alloc( msgLen );
        ; Setup parameters for call to function osal_mem_alloc
        MOV	A,R1
        MOV	R2,A
        MOV	R3,#0x0
        MOV	DPTR,#(osal_mem_alloc & 0xffff)
        MOV	A,#((osal_mem_alloc >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	?V0 + 4,R2
        MOV	?V0 + 5,R3
        MOV	R6,?V0 + 4
        MOV	R7,?V0 + 5
//  333   if ( msg_ptr )
        MOV	A,R6
        JNZ	??MT_BuildAndSendZToolResponse_0
        MOV	A,R7
??MT_BuildAndSendZToolResponse_0:
        JZ	??MT_BuildAndSendZToolResponse_1
//  334   {
//  335 #ifdef SPI_MGR_DEFAULT_PORT
//  336     MT_BuildSPIMsg( cmd, msg_ptr, dataLen, pData );
        ; Setup parameters for call to function MT_BuildSPIMsg
        MOV	R0,#?V0 + 0
        LCALL	?PUSH_XSTACK_I_TWO
        CFI CFA_XSP16 add(XSP16, 18)
        MOV	R1,?V0 + 3
        MOV	A,R6
        MOV	R4,A
        MOV	A,R7
        MOV	R5,A
        MOV	R2,?V0 + 6
        MOV	R3,?V0 + 7
        MOV	DPTR,#(MT_BuildSPIMsg & 0xffff)
        MOV	A,#((MT_BuildSPIMsg >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	A,#0x2
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 16)
//  337     HalUARTWrite ( SPI_MGR_DEFAULT_PORT, msg_ptr, msgLen );
        ; Setup parameters for call to function HalUARTWrite
        MOV	R4,?V0 + 2
        MOV	R5,#0x0
        MOV	A,R6
        MOV	R2,A
        MOV	A,R7
        MOV	R3,A
        MOV	R1,#0x0
        MOV	DPTR,#(HalUARTWrite & 0xffff)
        MOV	A,#((HalUARTWrite >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
//  338 #endif
//  339     osal_mem_free( msg_ptr );
        ; Setup parameters for call to function osal_mem_free
        MOV	A,R6
        MOV	R2,A
        MOV	A,R7
        MOV	R3,A
        MOV	DPTR,#(osal_mem_free & 0xffff)
        MOV	A,#((osal_mem_free >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
//  340   }
//  341 }
??MT_BuildAndSendZToolResponse_1:
        SJMP	??Subroutine18_0
        CFI EndBlock cfiBlock5

        RSEG BANKED_CODE:CODE:NOROOT(0)
?Subroutine18:
        CFI Block cfiBlock6 Using cfiCommon0
        CFI NoFunction
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 18)
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-15)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-16)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V6 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V7 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI Invalid
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 16)
        CFI Valid
??Subroutine18_0:
        MOV	R7,#0x8
        LJMP	?BANKED_LEAVE_XDATA
        CFI EndBlock cfiBlock6
//  342 #endif
//  343 
//  344 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
//  345 /*********************************************************************
//  346  * @fn      MT_BuildAndSendZToolCB
//  347  *
//  348  * @brief
//  349  *
//  350  *   Build and send a ZTOOL Callback msg
//  351  *
//  352  * @param   len - length of data portion of the message
//  353  *
//  354  * @return  void
//  355  */

        RSEG BANKED_CODE:CODE:NOROOT(0)
//  356 void MT_BuildAndSendZToolCB( uint16 callbackID, byte len, byte *pData )
MT_BuildAndSendZToolCB:
        CFI Block cfiBlock7 Using cfiCommon0
        CFI Function MT_BuildAndSendZToolCB
//  357 {
        FUNCALL MT_BuildAndSendZToolCB, osal_msg_allocate
        LOCFRAME XSTACK, 16, STACK
        ARGFRAME XSTACK, 16, STACK
        FUNCALL MT_BuildAndSendZToolCB, osal_memcpy
        LOCFRAME XSTACK, 19, STACK
        ARGFRAME XSTACK, 19, STACK
        FUNCALL MT_BuildAndSendZToolCB, osal_msg_send
        LOCFRAME XSTACK, 16, STACK
        ARGFRAME XSTACK, 16, STACK
        MOV	A,#-0x10
        LCALL	?BANKED_ENTER_XDATA
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V7 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI V6 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-15)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-16)))
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 16)
        ; Saved register size: 16
        ; Auto size: 0
        MOV	A,R2
        MOV	R6,A
        MOV	A,R3
        MOV	R7,A
        MOV	?V0 + 0,R1
        MOV	?V0 + 6,R4
        MOV	?V0 + 7,R5
//  358   byte msgLen;
//  359   mtOSALSerialData_t *msgPtr;
//  360   byte *msg;
//  361 
//  362   msgLen = sizeof ( mtOSALSerialData_t ) + SPI_0DATA_MSG_LEN + len;
//  363 
//  364   msgPtr = (mtOSALSerialData_t *)osal_msg_allocate( msgLen );
        ; Setup parameters for call to function osal_msg_allocate
        MOV	A,#0x9
        LCALL	?Subroutine11 & 0xFFFF
??CrossCallReturnLabel_42:
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	?V0 + 2,R2
        MOV	?V0 + 3,R3
//  365   if ( msgPtr )
        MOV	A,R2
        JNZ	??MT_BuildAndSendZToolCB_0
        MOV	A,R3
??MT_BuildAndSendZToolCB_0:
        JZ	??MT_BuildAndSendZToolCB_1
//  366   {
//  367     msgPtr->hdr.event = CB_FUNC;
        MOV	A,#0x4
        MOV	DPL,R2
        MOV	DPH,R3
        MOVX	@DPTR,A
//  368     msgPtr->msg = (uint8 *)(msgPtr+1);
        MOV	A,R2
12345

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -