📄 osal_sampleapp.lst
字号:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 13/Nov/2008 11:16:32 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\Source\OSAL_SampleApp.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2\Projects\zs #
# tack\Samples\SampleApp\CC2430DB\..\..\..\Tools\CC #
# 2430DB\f8wEndev.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_OPT_FFD=0 -DBLINK_LEDS "-DCONST=const #
# __code" -DGENERIC=__generic) -f "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\Tools\CC2430DB\f8wCon #
# fig.cfg" (-DSECURE=0 -DDEFAULT_CHANLIST=0x0000080 #
# 0 -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\Source\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\ZMain\TI2430DB\" -I #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\..\..\..\..\..\Compo #
# nents\mt\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\hal\ #
# include\" -I "C:\Texas Instruments\ZStack-1.4.2\P #
# rojects\zstack\Samples\SampleApp\CC2430DB\..\..\. #
# .\..\..\Components\hal\target\CC2430EB\" -I #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\..\..\..\..\..\Compo #
# nents\osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\osal #
# \include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\af\" -I "C:\Texas Instruments\ZStack-1.4.2\Proj #
# ects\zstack\Samples\SampleApp\CC2430DB\..\..\..\. #
# .\..\Components\stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\sec\" -I "C:\Texas Instruments\ZStack-1.4.2\Pro #
# jects\zstack\Samples\SampleApp\CC2430DB\..\..\..\ #
# ..\..\Components\stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\zdo\" -I "C:\Texas Instruments\ZStack-1.4.2\Pro #
# jects\zstack\Samples\SampleApp\CC2430DB\..\..\..\ #
# ..\..\Components\zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\zmac #
# \" -I "C:\Texas Instruments\ZStack-1.4.2\Projects #
# \zstack\Samples\SampleApp\CC2430DB\..\..\..\..\.. #
# \Components\services\saddr\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\serv #
# ices\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# include\" -I "C:\Texas Instruments\ZStack-1.4.2\P #
# rojects\zstack\Samples\SampleApp\CC2430DB\..\..\. #
# .\..\..\Components\mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# low_level\srf03\single_chip\" -D CC2430EB -D #
# NWK_AUTO_POLL -D ZTOOL_P1 -D MT_TASK -lC #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\EndDeviceEB\List\" #
# -lA "C:\Texas Instruments\ZStack-1.4.2\Projects\z #
# stack\Samples\SampleApp\CC2430DB\EndDeviceEB\List #
# \" --diag_suppress Pe001,Pa010 --diag_remark #
# pe550 -o "C:\Texas Instruments\ZStack-1.4.2\Proje #
# cts\zstack\Samples\SampleApp\CC2430DB\EndDeviceEB #
# \Obj\" -e --require_prototypes -z9 #
# --no_code_motion --debug --core=plain #
# --dptr=16,1 --data_model=large #
# --code_model=banked --calling_convention=xdata_re #
# entrant --place_constants=data --nr_virtual_regs #
# 8 "C:\Texas Instruments\ZStack-1.4.2\Projects\zst #
# ack\Samples\SampleApp\Source\OSAL_SampleApp.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\CC2430DB\EndDeviceEB\List\OSAL #
# _SampleApp.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\CC2430DB\EndDeviceEB\Obj\OSAL_ #
# SampleApp.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2\Projects\zstack\Samples\SampleApp\Source\OSAL_SampleApp.c
1 /*********************************************************************
2 Filename: OSAL_SampleApp.c
3 Revised: $Date: 2007-03-08 13:26:13 -0800 (Thu, 08 Mar 2007) $
4 Revision: $Revision: 13719 $
5
6 Description:
7
8 This file contains all the settings and other functions that
9 the user should set and change.
10
11 Notes:
12
13 Copyright (c) 2007 by Texas Instruments, Inc.
14 All Rights Reserved. Permission to use, reproduce, copy, prepare
15 derivative works, modify, distribute, perform, display or sell this
16 software and/or its documentation for any purpose is prohibited
17 without the express written consent of Texas Instruments, Inc.
18 *********************************************************************/
19
20
21 /*********************************************************************
22 * INCLUDES
23 */
24 #include "ZComDef.h"
25 #include "OSAL.h"
26 #include "OSAL_Tasks.h"
27 #include "OSAL_Custom.h"
28
29 #if defined ( MT_TASK )
30 #include "MTEL.h"
31 #endif
32
33 #if !defined( NONWK )
34 #include "nwk.h"
35 #include "APS.h"
36 #include "ZDApp.h"
37 #endif
38
39 #include "SampleApp.h"
40
41 #include "OnBoard.h"
42
43 #include "hal_drivers.h"
44
45 /*********************************************************************
46 * MACROS
47 */
48
49 /*********************************************************************
50 * CONSTANTS
51 */
52
53 /*********************************************************************
54 * TYPEDEFS
55 */
56
57 /*********************************************************************
58 * GLOBAL VARIABLES
59 */
60
61 /*********************************************************************
62 * USER DEFINED TASK TABLE
63 */
64
65 /*********************************************************************
66 * EXTERNAL VARIABLES
67 */
68
69 /*********************************************************************
70 * EXTERNAL FUNCTIONS
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -