📄 zdapp.lst
字号:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 13/Nov/2008 11:59:04 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2\Components\stac #
# k\zdo\ZDApp.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2\Projects\zs #
# tack\Samples\SampleApp\CC2430DB\..\..\..\Tools\CC #
# 2430DB\f8wRouter.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_CFG_APP_PENDING_QUEUE=TRUE -DRTR_NWK #
# -DBLINK_LEDS "-DCONST=const __code" #
# -DGENERIC=__generic) -f "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\Tools\CC2430DB\f8wCon #
# fig.cfg" (-DSECURE=0 -DDEFAULT_CHANLIST=0x0000080 #
# 0 -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\Source\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\ZMain\TI2430DB\" -I #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\..\..\..\..\..\Compo #
# nents\mt\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\hal\ #
# include\" -I "C:\Texas Instruments\ZStack-1.4.2\P #
# rojects\zstack\Samples\SampleApp\CC2430DB\..\..\. #
# .\..\..\Components\hal\target\CC2430EB\" -I #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\..\..\..\..\..\Compo #
# nents\osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\osal #
# \include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\af\" -I "C:\Texas Instruments\ZStack-1.4.2\Proj #
# ects\zstack\Samples\SampleApp\CC2430DB\..\..\..\. #
# .\..\Components\stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\sec\" -I "C:\Texas Instruments\ZStack-1.4.2\Pro #
# jects\zstack\Samples\SampleApp\CC2430DB\..\..\..\ #
# ..\..\Components\stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\zdo\" -I "C:\Texas Instruments\ZStack-1.4.2\Pro #
# jects\zstack\Samples\SampleApp\CC2430DB\..\..\..\ #
# ..\..\Components\zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\zmac #
# \" -I "C:\Texas Instruments\ZStack-1.4.2\Projects #
# \zstack\Samples\SampleApp\CC2430DB\..\..\..\..\.. #
# \Components\services\saddr\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\serv #
# ices\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# include\" -I "C:\Texas Instruments\ZStack-1.4.2\P #
# rojects\zstack\Samples\SampleApp\CC2430DB\..\..\. #
# .\..\..\Components\mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# low_level\srf03\single_chip\" -D CC2430EB -D #
# ZTOOL_P1 -D MT_TASK -lC "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\RouterEB\List\" -lA "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\RouterEB\List\" #
# --diag_suppress Pe001,Pa010 --diag_remark pe550 #
# -o "C:\Texas Instruments\ZStack-1.4.2\Projects\zs #
# tack\Samples\SampleApp\CC2430DB\RouterEB\Obj\" #
# -e --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2\Components\sta #
# ck\zdo\ZDApp.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\CC2430DB\RouterEB\List\ZDApp.l #
# st #
# Object file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\CC2430DB\RouterEB\Obj\ZDApp.r5 #
# 1 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2\Components\stack\zdo\ZDApp.c
1 /*********************************************************************
2 Filename: ZDApp.c
3 Revised: $Date: 2007-05-31 15:56:04 -0700 (Thu, 31 May 2007) $
4 Revision: $Revision: 14490 $
5
6 Description:
7
8 This file contains the interface to the Zigbee Device Application.
9 This is the Application part that the use can change. This also
10 contains the Task functions.
11
12 Notes:
13
14 Copyright (c) 2006 by Texas Instruments, Inc.
15 All Rights Reserved. Permission to use, reproduce, copy, prepare
16 derivative works, modify, distribute, perform, display or sell this
17 software and/or its documentation for any purpose is prohibited
18 without the express written consent of Texas Instruments, Inc.
19 *********************************************************************/
20
21 /*********************************************************************
22 * INCLUDES
23 */
24 #include "ZComDef.h"
25 #include "ZMac.h"
26 #include "OSAL.h"
27 #include "OSAL_Tasks.h"
28 #include "OSAL_PwrMgr.h"
29 #include "OSAL_Nv.h"
30 #include "AF.h"
31 #include "APSMEDE.h"
32 #include "NLMEDE.h"
33 #include "AddrMgr.h"
34 #include "ZDCache.h"
35 #include "ZDProfile.h"
36 #include "ZDObject.h"
37 #include "ZDConfig.h"
38 #include "ZDSecMgr.h"
39 #include "ZDApp.h"
40 #include "DebugTrace.h"
41 #include "nwk_util.h"
42 #include "OnBoard.h"
\ In segment SFR_AN, at 0xc9
\ unsigned char volatile __sfr WDCTL
\ WDCTL:
\ 000000 DS 1
43 #include "ZGlobals.h"
44
45 #if ( SECURE != 0 )
46 #include "ssp.h"
47 #endif
48
49 #if defined( MT_ZDO_FUNC )
50 #include "MT_ZDO.h"
51 #endif
52
53 /* HAL */
54 #include "hal_led.h"
55 #include "hal_lcd.h"
56 #include "hal_key.h"
57
58 #if defined( MT_MAC_FUNC ) || defined( MT_MAC_CB_FUNC )
59 #error "ERROR! MT_MAC functionalities should be disabled on ZDO devices"
60 #endif
61 /*********************************************************************
62 * MACROS
63 */
64
65 /*********************************************************************
66 * CONSTANTS
67 */
68 #if !defined( NWK_START_DELAY )
69 #define NWK_START_DELAY 100 // in milliseconds
70 #endif
71
72 #if !defined( EXTENDED_JOINING_RANDOM_MASK )
73 #define EXTENDED_JOINING_RANDOM_MASK 0x007F
74 #endif
75
76 #if !defined( BEACON_REQUEST_DELAY )
77 #define BEACON_REQUEST_DELAY 100 // in milliseconds
78 #endif
79
80 #if !defined( BEACON_REQ_DELAY_MASK )
81 #define BEACON_REQ_DELAY_MASK 0x007F
82 #endif
83
84 #if defined (AUTO_SOFT_START)
85 #define MAX_RESUME_RETRY 3
86 #define NUM_DISC_ATTEMPTS 3
87 #else
88 #define MAX_RESUME_RETRY 1
89 #endif
90
91 #define MAX_DEVICE_UNAUTH_TIMEOUT 5000 // 5 seconds
92
93 // Beacon Order Settings (see NLMEDE.h)
94 #define DEFAULT_BEACON_ORDER BEACON_ORDER_NO_BEACONS
95 #define DEFAULT_SUPERFRAME_ORDER DEFAULT_BEACON_ORDER
96
97 #if ( SECURE != 0 )
98 #if !defined( MAX_NWK_FRAMECOUNTER_CHANGES )
99 // The number of times the frame counter can change before
100 // saving to NV
101 #define MAX_NWK_FRAMECOUNTER_CHANGES 1000
102 #endif
103 #endif
104
105 // Leave control bits
106 #define ZDAPP_LEAVE_CTRL_INIT 0
107 #define ZDAPP_LEAVE_CTRL_SET 1
108 #define ZDAPP_LEAVE_CTRL_RA 2
109
110 // Standard time to update NWK NV data
111 #define ZDAPP_UPDATE_NWK_NV_TIME 100
112
113 // Address Manager Stub Implementation
114 #define ZDApp_NwkWriteNVRequest AddrMgrWriteNVRequest
115
116 /*********************************************************************
117 * TYPEDEFS
118 */
119
120 /*********************************************************************
121 * GLOBAL VARIABLES
122 */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -