📄 sampleapphw.lst
字号:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 13/Nov/2008 11:59:03 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\CC2430DB\Source\SampleAppHw.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2\Projects\zs #
# tack\Samples\SampleApp\CC2430DB\..\..\..\Tools\CC #
# 2430DB\f8wRouter.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_CFG_APP_PENDING_QUEUE=TRUE -DRTR_NWK #
# -DBLINK_LEDS "-DCONST=const __code" #
# -DGENERIC=__generic) -f "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\Tools\CC2430DB\f8wCon #
# fig.cfg" (-DSECURE=0 -DDEFAULT_CHANLIST=0x0000080 #
# 0 -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\Source\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\ZMain\TI2430DB\" -I #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\..\..\..\..\..\Compo #
# nents\mt\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\hal\ #
# include\" -I "C:\Texas Instruments\ZStack-1.4.2\P #
# rojects\zstack\Samples\SampleApp\CC2430DB\..\..\. #
# .\..\..\Components\hal\target\CC2430EB\" -I #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\..\..\..\..\..\Compo #
# nents\osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\osal #
# \include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\af\" -I "C:\Texas Instruments\ZStack-1.4.2\Proj #
# ects\zstack\Samples\SampleApp\CC2430DB\..\..\..\. #
# .\..\Components\stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\sec\" -I "C:\Texas Instruments\ZStack-1.4.2\Pro #
# jects\zstack\Samples\SampleApp\CC2430DB\..\..\..\ #
# ..\..\Components\stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\stac #
# k\zdo\" -I "C:\Texas Instruments\ZStack-1.4.2\Pro #
# jects\zstack\Samples\SampleApp\CC2430DB\..\..\..\ #
# ..\..\Components\zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\zmac #
# \" -I "C:\Texas Instruments\ZStack-1.4.2\Projects #
# \zstack\Samples\SampleApp\CC2430DB\..\..\..\..\.. #
# \Components\services\saddr\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\serv #
# ices\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# include\" -I "C:\Texas Instruments\ZStack-1.4.2\P #
# rojects\zstack\Samples\SampleApp\CC2430DB\..\..\. #
# .\..\..\Components\mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\..\..\..\..\..\Components\mac\ #
# low_level\srf03\single_chip\" -D CC2430EB -D #
# ZTOOL_P1 -D MT_TASK -lC "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\RouterEB\List\" -lA "C:\Texas #
# Instruments\ZStack-1.4.2\Projects\zstack\Samples\ #
# SampleApp\CC2430DB\RouterEB\List\" #
# --diag_suppress Pe001,Pa010 --diag_remark pe550 #
# -o "C:\Texas Instruments\ZStack-1.4.2\Projects\zs #
# tack\Samples\SampleApp\CC2430DB\RouterEB\Obj\" #
# -e --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2\Projects\zstac #
# k\Samples\SampleApp\CC2430DB\Source\SampleAppHw.c #
# " #
# List file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\CC2430DB\RouterEB\List\SampleA #
# ppHw.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2\Projects\zstack #
# \Samples\SampleApp\CC2430DB\RouterEB\Obj\SampleAp #
# pHw.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2\Projects\zstack\Samples\SampleApp\CC2430DB\Source\SampleAppHw.c
1 /*********************************************************************
2 Filename: SampleAppHw.c
3 Revised: $Date: 2007-03-08 13:26:13 -0800 (Thu, 08 Mar 2007) $
4 Revision: $Revision: 13719 $
5
6 Description:
7
8 Copyright (c) 2007 by Texas Instruments, Inc.
9 All Rights Reserved. Permission to use, reproduce, copy, prepare
10 derivative works, modify, distribute, perform, display or sell this
11 software and/or its documentation for any purpose is prohibited
12 without the express written consent of Texas Instruments, Inc.
13 *********************************************************************/
14
15 /*********************************************************************
16 * INCLUDES
17 */
18 #include "ZComDef.h"
19 #include "hal_mcu.h"
\ In segment SFR_AN, at 0x8f
\ unsigned char volatile __sfr P0INP
\ P0INP:
\ 000000 DS 1
\ In segment SFR_AN, at 0xf3
\ unsigned char volatile __sfr P0SEL
\ P0SEL:
\ 000000 DS 1
\ In segment SFR_AN, at 0xfd
\ unsigned char volatile __sfr P0DIR
\ P0DIR:
\ 000000 DS 1
20 #include "hal_defs.h"
21
22 #include "SampleAppHw.h"
23
24 /*********************************************************************
25 * MACROS
26 */
27
28 /*********************************************************************
29 * CONSTANTS
30 */
31
32 #if defined( CC2430DB )
33 /* NOTES: Jumper should be between P7.1 and P7.3 on the CC2430DB.
34 * P7.1 -> CC2430 P1.3
35 * p7.3 -> CC2430 P0.4
36 */
37 #define JUMPERIN_BIT 0x08
38 #define JUMPERIN_SEL P1SEL
39 #define JUMPERIN_DIR P1DIR
40 #define JUMPERIN_INP P1INP
41 #define JUMPERIN P1
42
43 #define JUMPEROUT_BIT 0x10
44 #define JUMPEROUT_SEL P0SEL
45 #define JUMPEROUT_DIR P0DIR
46 #define JUMPEROUT_INP P0INP
47 #define JUMPEROUT P0
48
49 #elif defined( CC2430EB )
50 /* NOTES: Jumper should be between I/O A pin 9 and 11 on the CC2430EB.
51 * I/O A pin 9 -> CC2430 P0.2
52 * I/O A pin 11 -> CC2430 P0.3
53 */
54 #define JUMPERIN_BIT 0x04
55 #define JUMPERIN_SEL P0SEL
56 #define JUMPERIN_DIR P0DIR
57 #define JUMPERIN_INP P0INP
58 #define JUMPERIN P0
59
60 #define JUMPEROUT_BIT 0x08
61 #define JUMPEROUT_SEL P0SEL
62 #define JUMPEROUT_DIR P0DIR
63 #define JUMPEROUT_INP P0INP
64 #define JUMPEROUT P0
65
66 #if defined (HAL_UART) && (HAL_UART==TRUE)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -