break.exp

这个是LINUX下的GDB调度工具的源码

#   Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
#   2000, 2002, 2003
#   Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# [e-mail]

# This file was written by Rob Savoye. ([e-mail])

if $tracelevel then {
    strace $tracelevel
}


#
# test running programs
#
set prms_id 0
set bug_id 0

set testfile "break"
set srcfile ${testfile}.c
set srcfile1 ${testfile}1.c
set binfile ${objdir}/${subdir}/${testfile}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug additional_flags=-w}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug additional_flags=-w}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}

if  { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug additional_flags=-w}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}

if [get_compiler_info ${binfile}] {
    return -1
}

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

if [target_info exists gdb_stub] {
    gdb_step_for_stub;
}
#
# test simple breakpoint setting commands
#

# Test deleting all breakpoints when there are none installed,
# GDB should not prompt for confirmation.
# Note that gdb-init.exp provides a "delete_breakpoints" proc
# for general use elsewhere.

send_gdb "delete breakpoints\n"
gdb_expect {
     -re "Delete all breakpoints.*$" {
	    send_gdb "y\n"
	    gdb_expect {
		-re "$gdb_prompt $" {
		    fail "Delete all breakpoints when none (unexpected prompt)"
		}
		timeout	{ fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
	    }
	}
     -re ".*$gdb_prompt $"       { pass "Delete all breakpoints when none" }
    timeout	            { fail "Delete all breakpoints when none (timeout)" }
}

#
# test break at function
#
gdb_test "break main" \
    "Breakpoint.*at.* file .*$srcfile, line.*" \
    "breakpoint function"

#
# test break at quoted function
#
gdb_test "break \"marker2\"" \
    "Breakpoint.*at.* file .*$srcfile1, line.*" \
    "breakpoint quoted function"

#
# test break at function in file
#
gdb_test "break $srcfile:factorial" \
    "Breakpoint.*at.* file .*$srcfile, line.*" \
    "breakpoint function in file"

set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]

#
# test break at line number
#
# Note that the default source file is the last one whose source text
# was printed.  For native debugging, before we've executed the
# program, this is the file containing main, but for remote debugging,
# it's wherever the processor was stopped when we connected to the
# board.  So, to be sure, we do a list command.
#
gdb_test "list main" \
    ".*main \\(argc, argv, envp\\).*" \
    "use `list' to establish default source file"
gdb_test "break $bp_location1" \
    "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \
    "breakpoint line number"

#
# test duplicate breakpoint
#
gdb_test "break $bp_location1" \
    "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \
    "breakpoint duplicate"

set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]

#
# test break at line number in file
#
gdb_test "break $srcfile:$bp_location2" \
    "Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \
    "breakpoint line number in file"

set bp_location3 [gdb_get_line_number "set breakpoint 3 here"]
set bp_location4 [gdb_get_line_number "set breakpoint 4 here"]

#
# Test putting a break at the start of a multi-line if conditional.
# Verify the breakpoint was put at the start of the conditional.
#
gdb_test "break multi_line_if_conditional" \
    "Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \
    "breakpoint at start of multi line if conditional"

gdb_test "break multi_line_while_conditional" \
    "Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \
    "breakpoint at start of multi line while conditional"

set bp_location5 [gdb_get_line_number "set breakpoint 5 here"]
set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]

#
# check to see what breakpoints are set
#
if [target_info exists gdb_stub] {
    set main_line $bp_location5
} else {
    set main_line $bp_location6
}

if {$hp_aCC_compiler} {
    set proto "\\(int\\)"
} else {
    set proto ""
}

set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1]
set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1]

gdb_test "info break" \
    "Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$main_line.*
\[0-9\]+\[\t \]+breakpoint     keep y.* in marker2 at .*$srcfile1:($bp_location8|$bp_location9).*
\[0-9\]+\[\t \]+breakpoint     keep y.* in factorial$proto at .*$srcfile:$bp_location7.*
\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location1.*
\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location1.*
\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location2.*
\[0-9\]+\[\t \]+breakpoint     keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.*
\[0-9\]+\[\t \]+breakpoint     keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \
    "breakpoint info"

# FIXME: The rest of this test doesn't work with anything that can't
# handle arguments.
# Huh? There doesn't *appear* to be anything that passes arguments
# below.
if [istarget "mips-idt-*"] then {
    return
}

#
# run until the breakpoint at main is hit. For non-stubs-using targets.
#
if ![target_info exists use_gdb_stub] {
  if [istarget "*-*-vxworks*"] then {
    send_gdb "run vxmain \"2\"\n"
    set timeout 120
    verbose "Timeout is now $timeout seconds" 2
  } else {
	send_gdb "run\n"
  }
  gdb_expect {
    -re "The program .* has been started already.*y or n. $" {
	send_gdb "y\n"
	exp_continue
    }
    -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\
	                    { pass "run until function breakpoint" }
    -re ".*$gdb_prompt $"       { fail "run until function breakpoint" }
    timeout	            { fail "run until function breakpoint (timeout)" }
  }
} else {
    if ![target_info exists gdb_stub] {
	gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue"
    }
}

#
# run until the breakpoint at a line number
#
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \
			"run until breakpoint set at a line number"

#
# Run until the breakpoint set in a function in a file
#
for {set i 6} {$i >= 1} {incr i -1} {
	gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \
			"run until file:function($i) breakpoint"
}

#
# Run until the breakpoint set at a quoted function
#
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*" \
		"run until quoted breakpoint"
#
# run until the file:function breakpoint at a line number in a file
#
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \
		"run until file:linenum breakpoint"

# Test break at offset +1
set bp_location10 [gdb_get_line_number "set breakpoint 10 here"]

gdb_test "break +1" \
    "Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \
    "breakpoint offset +1"

# Check to see if breakpoint is hit when stepped onto

gdb_test "step" \
    ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \
    "step onto breakpoint"

#
# delete all breakpoints so we can start over, course this can be a test too
#
delete_breakpoints

#
# test temporary breakpoint at function
#

gdb_test "tbreak main" "Breakpoint.*at.* file .*$srcfile, line.*" "Temporary breakpoint function"

#
# test break at function in file
#

gdb_test "tbreak $srcfile:factorial" "Breakpoint.*at.* file .*$srcfile, line.*" \
	"Temporary breakpoint function in file"

#
# test break at line number
#
send_gdb "tbreak $bp_location1\n"
gdb_expect {
    -re "Breakpoint.*at.* file .*$srcfile, line $bp_location1.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
	-re ".*$gdb_prompt $"   { pass "Temporary breakpoint line number #1" }
	timeout	    { fail "breakpoint line number #1 (timeout)" }
}

gdb_test "tbreak $bp_location6" "Breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2"

#
# test break at line number in file
#
send_gdb "tbreak $srcfile:$bp_location2\n"
gdb_expect {
    -re "Breakpoint.*at.* file .*$srcfile, line $bp_location2.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
	-re ".*$gdb_prompt $"   { pass "Temporary breakpoint line number in file #1" }
	timeout	    { fail "Temporary breakpoint line number in file #1 (timeout)" }
}

set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
gdb_test  "tbreak $srcfile:$bp_location11" "Breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2"

#
# check to see what breakpoints are set (temporary this time)
#
gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint     del.*y.*in factorial$proto at .*$srcfile:$bp_location7.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location11.*" \
    "Temporary breakpoint info"


#***********

# Verify that catchpoints for fork, vfork and exec don't trigger
# inappropriately.  (There are no calls to those system functions