events.c

PWM同步

/** ###################################################################
**     Filename  : Events.C
**     Project   : Iadc
**     Processor : 56F8346
**     Beantype  : Events
**     Version   : Driver 01.02
**     Compiler  : Metrowerks DSP C Compiler
**     Date/Time : 2009-2-9, 10:52
**     Abstract  :
**         This is user's event module.
**         Put your event handler code here.
**     Settings  :
**     Contents  :
**         AdcFD_OnEnd - void AdcFD_OnEnd(void);
**
**     (c) Copyright UNIS, spol. s r.o. 1997-2005
**     UNIS, spol. s r.o.
**     Jundrovska 33
**     624 00 Brno
**     Czech Republic
**     http      : www.processorexpert.com
**     mail      : [e-mail]
** ###################################################################*/
/* MODULE Events */

#include "Cpu.h"
#include "Events.h"

Word16   phaseA;
Word16   phaseB;
int   *pointer;
/*
** ===================================================================
**     Event       :  AdcFD_OnEnd (module Events)
**
**     From bean   :  AdcFD [ADC]
**     Description :
**         This event is called after the measurement (which
**         consists of <1 or more conversions>) is/are finished.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
#pragma interrupt called /* Comment this line if the appropriate 'Interrupt preserve registers' property */
                         /* is set to 'yes' (#pragma interrupt saveall is generated before the ISR)      */
void AdcFD_OnEnd(void)
{
  /* Write your code here ... */
  /*pointer = &phaseA;
  AdcFD_GetChanValue(0,pointer);
  pointer = &phaseB;
  AdcFD_GetChanValue(1,pointer);*/

  phaseA = (Word16)PESL(ADCB, ADC_READ_SAMPLE, 0);
  phaseB = (Word16)PESL(ADCB, ADC_READ_SAMPLE, 1);

}

/*
** ===================================================================
**     Event       :  PWM_sync_OnReload (module Events)
**
**     From bean   :  PWM_sync [PWMMC]
**     Description :
**         This event is called before PWM cycle according to reload
**         frequency. (only when the bean is enabled - <Enable> and
**         the events are enabled - <EnableEvent>) (event is
**         available only if interrupt service/event is enabled).
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
#pragma interrupt called /* Comment this line if the appropriate 'Interrupt preserve registers' property */
                         /* is set to 'yes' (#pragma interrupt saveall is generated before the ISR)      */
void PWM_sync_OnReload(void)
{
  
  /* Write your code here ... */
  PWM_sync_SetRatio16(0,(UWord16)phaseA);
  PWM_sync_SetRatio16(2,(UWord16)phaseB);
  PWM_sync_Load();
}

/*
** ===================================================================
**     Event       :  PWM_sync_OnFault0 (module Events)
**
**     From bean   :  PWM_sync [PWMMC]
**     Description :
**         This event is called when fault 0 occurs. (only when the
**         bean is enabled - <Enable> and the events are enabled -
**         <EnableEvent>). (event is available only if interrupt
**         service/event is enabled). The event clears Fault flag
**         only when the Fault is set to manual clearing mode. When
**         the Fault is set to the automatic clearing mode, the
**         Fault flag must be cleared by the user using
**         ClearFaultFlag() method.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
#pragma interrupt called /* Comment this line if the appropriate 'Interrupt preserve registers' property */
                         /* is set to 'yes' (#pragma interrupt saveall is generated before the ISR)      */
void PWM_sync_OnFault0(void)
{
  /* Write your code here ... */
}

/*
** ===================================================================
**     Event       :  PWM_sync_OnFault1 (module Events)
**
**     From bean   :  PWM_sync [PWMMC]
**     Description :
**         This event is called when fault 1 occurs. (only when the
**         bean is enabled - <Enable> and the events are enabled -
**         <EnableEvent>). (event is available only if interrupt
**         service/event is enabled). The event clears Fault flag
**         only when the Fault is set to manual clearing mode. When
**         the Fault is set to the automatic clearing mode, the
**         Fault flag must be cleared by the user using
**         ClearFaultFlag() method.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
#pragma interrupt called /* Comment this line if the appropriate 'Interrupt preserve registers' property */
                         /* is set to 'yes' (#pragma interrupt saveall is generated before the ISR)      */
void PWM_sync_OnFault1(void)
{
  /* Write your code here ... */
}

/*
** ===================================================================
**     Event       :  PWM_sync_OnFault2 (module Events)
**
**     From bean   :  PWM_sync [PWMMC]
**     Description :
**         This event is called when fault 2 occurs. (only when the
**         bean is enabled - <Enable> and the events are enabled -
**         <EnableEvent>). (event is available only if interrupt
**         service/event is enabled). The event clears Fault flag
**         only when the Fault is set to manual clearing mode. When
**         the Fault is set to the automatic clearing mode, the
**         Fault flag must be cleared by the user using
**         ClearFaultFlag() method.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
#pragma interrupt called /* Comment this line if the appropriate 'Interrupt preserve registers' property */
                         /* is set to 'yes' (#pragma interrupt saveall is generated before the ISR)      */
void PWM_sync_OnFault2(void)
{
  /* Write your code here ... */
}

/* END Events */

/*
** ###################################################################
**
**     This file was created by UNIS Processor Expert 2.97 [03.74]
**     for the Freescale 56800 series of microcontrollers.
**
** ###################################################################
*/