btmtk_config.c

mtk平台蓝牙驱动源代码mtk平台蓝牙驱动源代码mtk平台蓝牙驱动源代码mtk平台蓝牙驱动源代码

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2006
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/

/*******************************************************************************
 * Filename:
 * ---------
 * btmtk_config.c
 *
 * Project:
 * --------
 *   Maui
 *
 * Description:
 * ------------
 *   This file is used to describe the configuration of GPIO pins to control bluetooth module.
 *
 * Author:
 * -------
 * -------
 *
 *==============================================================================
 *             HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *------------------------------------------------------------------------------
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *==============================================================================
 *******************************************************************************/

#ifdef  __BTMODULE_RFMD3500__
/*RFMD*/
/*RFMD*/ const unsigned char bt_gpio_setting[16] =
/*RFMD*/ {   8,   1,   // power on : pin(if use GPO, please plus 100), pol
/*RFMD*/     9,   1,   // gsm2bt   : pin(if use GPO, please plus 100), pol
/*RFMD*/  0xFF,   1,   // bt2gsm(5): pin(EINT n), pol
/*RFMD*/    33,  34,   // rxd3(33), txd3(34)
/*RFMD*/  0xFF,0xFF,   // cts3(35), rtx3(36)
/*RFMD*/     0,   0,   // reserved
/*RFMD*/     0,   0,   // reserved
/*RFMD*/     0,   0    // reserved
/*RFMD*/ };
/*RFMD*/
#endif

#ifdef  __BTMODULE_MT6601__
/*GORM*/
/*GORM*/ const unsigned char bt_gpio_setting[16] =
/*GORM*/ {
			//43,    1,   // power on : pin(if use GPO, please plus 100), pol
			0xff,    1,  //yth revised on 08/04/09
			
/*GORM*/    34,    1,   // reset    : pin(if use GPO, please plus 100), pol
/*GORM*/     3,    1,   // bt2gsm   : pin(EINT n), pol
/*GORM*/    49,   50,   // rxd3, txd3
/*GORM*/  0xFF, 0xFF,   // cts3, rts3
/*GORM*/    26,    3,   // lpoclk, mode
/*GORM*/    51,   54,  // PCM clk, PCM sync
/*GORM*/    52,   53   // PCM data output, PCM data input
/*RFMD*/ };
/*GORM*/
#endif