configure

压缩包中包含LINUX下多个命令的源码

# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
echo "$as_me: error: cannot run $ac_config_sub" >&2;}
   { (exit 1); exit 1; }; }

echo "$as_me:$LINENO: checking build system type" >&5
echo $ECHO_N "checking build system type... $ECHO_C" >&6
if test "${ac_cv_build+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_build_alias=$build_alias
test -z "$ac_cv_build_alias" &&
  ac_cv_build_alias=`$ac_config_guess`
test -z "$ac_cv_build_alias" &&
  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
   { (exit 1); exit 1; }; }
ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:$LINENO: result: $ac_cv_build" >&5
echo "${ECHO_T}$ac_cv_build" >&6
build=$ac_cv_build
build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`


echo "$as_me:$LINENO: checking host system type" >&5
echo $ECHO_N "checking host system type... $ECHO_C" >&6
if test "${ac_cv_host+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_host_alias=$host_alias
test -z "$ac_cv_host_alias" &&
  ac_cv_host_alias=$ac_cv_build_alias
ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:$LINENO: result: $ac_cv_host" >&5
echo "${ECHO_T}$ac_cv_host" >&6
host=$ac_cv_host
host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`


echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_target_alias=$target_alias
test "x$ac_cv_target_alias" = "x" &&
  ac_cv_target_alias=$ac_cv_host_alias
ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:$LINENO: result: $ac_cv_target" >&5
echo "${ECHO_T}$ac_cv_target" >&6
target=$ac_cv_target
target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`


# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}- # FIXME: Why not just _HOST?

# config.h turns this on, so make sure it's on for our tests too
#CPPFLAGS=-D_BSD_SOURCE

# Include files that we link into our own include directory from headers.
# Initialize it with the things we always want to use.
INCLUDES="crypt.h arpa/telnet.h arpa/ftp.h arpa/tftp.h protocols/talkd.h
	tftpsubs.h"

# Files that we link from somewhere other than headers to includes .  The
# number of entries in LINK_SRCS should match that in LINK_DSTS.
LINK_SRCS=''
LINK_DSTS=''

inetdaemondir='$(libexecdir)'


# Check whether --enable-servers or --disable-servers was given.
if test "${enable_servers+set}" = set; then
  enableval="$enable_servers"

else
  enable_servers=yes
fi;
# Check whether --enable-clients or --disable-clients was given.
if test "${enable_clients+set}" = set; then
  enableval="$enable_clients"

else
  enable_clients=yes
fi;
# Check whether --enable-libls or --disable-libls was given.
if test "${enable_libls+set}" = set; then
  enableval="$enable_libls"

else
  enable_libls=yes
fi;
# Check whether --enable-encryption or --disable-encryption was given.
if test "${enable_encryption+set}" = set; then
  enableval="$enable_encryption"

else
  enable_encryption=no
fi;
# Check whether --enable-authentication or --disable-authentication was given.
if test "${enable_authentication+set}" = set; then
  enableval="$enable_authentication"

else
  enable_authentication=no
fi;


# Check whether --with-krb4 or --without-krb4 was given.
if test "${with_krb4+set}" = set; then
  withval="$with_krb4"
  KERBEROS_VERSION=4
             KERBEROS_DIR=$withval
fi;

# Check whether --with-krb5 or --without-krb5 was given.
if test "${with_krb5+set}" = set; then
  withval="$with_krb5"
  KERBEROS_VERSION=5
             KERBEROS_DIR=$withval
fi;

# Check whether --with-wrap or --without-wrap was given.
if test "${with_wrap+set}" = set; then
  withval="$with_wrap"

fi;

# Check whether --with-pam or --without-pam was given.
if test "${with_pam+set}" = set; then
  withval="$with_pam"

fi;

# Check whether --enable-ftpd or --disable-ftpd was given.
if test "${enable_ftpd+set}" = set; then
  enableval="$enable_ftpd"

else
  enable_ftpd=$enable_servers
fi;
if test "$enable_ftpd" = yes; then
   ftpd_BUILD=ftpd
else
   ftpd_BUILD=''
fi;


# Check whether --enable-inetd or --disable-inetd was given.
if test "${enable_inetd+set}" = set; then
  enableval="$enable_inetd"

else
  enable_inetd=$enable_servers
fi;
if test "$enable_inetd" = yes; then
   inetd_BUILD=inetd
else
   inetd_BUILD=''
fi;


# Check whether --enable-rexecd or --disable-rexecd was given.
if test "${enable_rexecd+set}" = set; then
  enableval="$enable_rexecd"

else
  enable_rexecd=$enable_servers
fi;
if test "$enable_rexecd" = yes; then
   rexecd_BUILD=rexecd
else
   rexecd_BUILD=''
fi;


# Check whether --enable-rlogind or --disable-rlogind was given.
if test "${enable_rlogind+set}" = set; then
  enableval="$enable_rlogind"

else
  enable_rlogind=$enable_servers
fi;
if test "$enable_rlogind" = yes; then
   rlogind_BUILD=rlogind
else
   rlogind_BUILD=''
fi;


# Check whether --enable-rshd or --disable-rshd was given.
if test "${enable_rshd+set}" = set; then
  enableval="$enable_rshd"

else
  enable_rshd=$enable_servers
fi;
if test "$enable_rshd" = yes; then
   rshd_BUILD=rshd
else
   rshd_BUILD=''
fi;


# Check whether --enable-syslogd or --disable-syslogd was given.
if test "${enable_syslogd+set}" = set; then
  enableval="$enable_syslogd"

else
  enable_syslogd=$enable_servers
fi;
if test "$enable_syslogd" = yes; then
   syslogd_BUILD=syslogd
else
   syslogd_BUILD=''
fi;


# Check whether --enable-talkd or --disable-talkd was given.
if test "${enable_talkd+set}" = set; then
  enableval="$enable_talkd"

else
  enable_talkd=$enable_servers
fi;
if test "$enable_talkd" = yes; then
   talkd_BUILD=talkd
else
   talkd_BUILD=''
fi;


# Check whether --enable-telnetd or --disable-telnetd was given.
if test "${enable_telnetd+set}" = set; then
  enableval="$enable_telnetd"

else
  enable_telnetd=$enable_servers
fi;
if test "$enable_telnetd" = yes; then
   telnetd_BUILD=telnetd
else
   telnetd_BUILD=''
fi;


# Check whether --enable-tftpd or --disable-tftpd was given.
if test "${enable_tftpd+set}" = set; then
  enableval="$enable_tftpd"

else
  enable_tftpd=$enable_servers
fi;
if test "$enable_tftpd" = yes; then
   tftpd_BUILD=tftpd
else
   tftpd_BUILD=''
fi;


# Check whether --enable-uucpd or --disable-uucpd was given.
if test "${enable_uucpd+set}" = set; then
  enableval="$enable_uucpd"

else
  enable_uucpd=$enable_servers
fi;
if test "$enable_uucpd" = yes; then
   uucpd_BUILD=uucpd
else
   uucpd_BUILD=''
fi;



# Check whether --enable-ftp or --disable-ftp was given.
if test "${enable_ftp+set}" = set; then
  enableval="$enable_ftp"

else
  enable_ftp=$enable_clients
fi;
if test "$enable_ftp" = yes; then
   ftp_BUILD=ftp
else
   ftp_BUILD=''
fi;


# Check whether --enable-ping or --disable-ping was given.
if test "${enable_ping+set}" = set; then
  enableval="$enable_ping"

else
  enable_ping=$enable_clients
fi;
if test "$enable_ping" = yes; then
   ping_BUILD=ping
else
   ping_BUILD=''
fi;


# Check whether --enable-rcp or --disable-rcp was given.
if test "${enable_rcp+set}" = set; then
  enableval="$enable_rcp"

else
  enable_rcp=$enable_clients
fi;
if test "$enable_rcp" = yes; then
   rcp_BUILD=rcp
else
   rcp_BUILD=''
fi;


# Check whether --enable-rlogin or --disable-rlogin was given.
if test "${enable_rlogin+set}" = set; then
  enableval="$enable_rlogin"

else
  enable_rlogin=$enable_clients
fi;
if test "$enable_rlogin" = yes; then
   rlogin_BUILD=rlogin
else
   rlogin_BUILD=''
fi;


# Check whether --enable-rsh or --disable-rsh was given.
if test "${enable_rsh+set}" = set; then
  enableval="$enable_rsh"

else
  enable_rsh=$enable_clients
fi;
if test "$enable_rsh" = yes; then
   rsh_BUILD=rsh
else
   rsh_BUILD=''
fi;


# Check whether --enable-logger or --disable-logger was given.
if test "${enable_logger+set}" = set; then
  enableval="$enable_logger"

else
  enable_logger=$enable_clients
fi;
if test "$enable_logger" = yes; then
   logger_BUILD=logger
else
   logger_BUILD=''
fi;


# Check whether --enable-talk or --disable-talk was given.
if test "${enable_talk+set}" = set; then
  enableval="$enable_talk"

else
  enable_talk=$enable_clients
fi;
if test "$enable_talk" = yes; then
   talk_BUILD=talk
else
   talk_BUILD=''
fi;


# Check whether --enable-telnet or --disable-telnet was given.
if test "${enable_telnet+set}" = set; then
  enableval="$enable_telnet"

else
  enable_telnet=$enable_clients
fi;
if test "$enable_telnet" = yes; then
   telnet_BUILD=telnet
else
   telnet_BUILD=''
fi;


# Check whether --enable-tftp or --disable-tftp was given.
if test "${enable_tftp+set}" = set; then
  enableval="$enable_tftp"

else
  enable_tftp=$enable_clients
fi;
if test "$enable_tftp" = yes; then
   tftp_BUILD=tftp
else
   tftp_BUILD=''
fi;