opt.h

ucos+lwip在44b0+8019开发板上跑得比较稳定的程序。是ADS的工程

/*
 * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
 * All rights reserved. 
 * 
 * Redistribution and use in source and binary forms, with or without modification, 
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
 * OF SUCH DAMAGE.
 *
 * This file is part of the lwIP TCP/IP stack.
 * 
 * Author: Adam Dunkels <[e-mail]>
 *
 */
#ifndef __LWIP_OPT_H__
#define __LWIP_OPT_H__

#include "lwip/debug.h"
/* Include user defined options first */
//#include "lwipopts.h"

/* Define default values for unconfigured parameters. */

/* Platform specific locking */

/*
 * enable SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection
 * for certain critical regions during buffer allocation, deallocation and memory
 * allocation and deallocation.
 */

#ifndef SYS_LIGHTWEIGHT_PROT
#define SYS_LIGHTWEIGHT_PROT           0
#endif

#ifndef NO_SYS
#define NO_SYS 0
#endif
/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
   lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
   byte alignment -> define MEM_ALIGNMENT to 2. */

#ifndef MEM_ALIGNMENT
#define MEM_ALIGNMENT           4
#endif

/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs to be copied, this should be set high. */
#ifndef MEM_SIZE
#define MEM_SIZE                4096//org is 1600
#endif

/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
   sends a lot of data out of ROM (or other static memory), this
   should be set high. */
#ifndef MEMP_NUM_PBUF
#define MEMP_NUM_PBUF           16
#endif

/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
   per active UDP "connection". */
#ifndef MEMP_NUM_UDP_PCB
#define MEMP_NUM_UDP_PCB        10//org 4
#endif
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
   connections. */
#ifndef MEMP_NUM_TCP_PCB
#define MEMP_NUM_TCP_PCB        10//org 5
#endif
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
   connections. */
#ifndef MEMP_NUM_TCP_PCB_LISTEN
#define MEMP_NUM_TCP_PCB_LISTEN 8
#endif
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
   segments. */
#ifndef MEMP_NUM_TCP_SEG
#define MEMP_NUM_TCP_SEG        16
#endif
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
   timeouts. */
#ifndef MEMP_NUM_SYS_TIMEOUT
#define MEMP_NUM_SYS_TIMEOUT    3
#endif

/* The following four are used only with the sequential API and can be
   set to 0 if the application only will use the raw API. */
/* MEMP_NUM_NETBUF: the number of struct netbufs. */
#ifndef MEMP_NUM_NETBUF
#define MEMP_NUM_NETBUF         2
#endif
/* MEMP_NUM_NETCONN: the number of struct netconns. */
#ifndef MEMP_NUM_NETCONN
#define MEMP_NUM_NETCONN        4
#endif
/* MEMP_NUM_APIMSG: the number of struct api_msg, used for
   communication between the TCP/IP stack and the sequential
   programs. */
#ifndef MEMP_NUM_API_MSG
#define MEMP_NUM_API_MSG        16//8
#endif
/* MEMP_NUM_TCPIPMSG: the number of struct tcpip_msg, which is used
   for sequential API communication and incoming packets. Used in
   src/api/tcpip.c. */
#ifndef MEMP_NUM_TCPIP_MSG
#define MEMP_NUM_TCPIP_MSG      16//8
#endif

/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */

#ifndef PBUF_POOL_SIZE
#define PBUF_POOL_SIZE          32//16
#endif

/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */

#ifndef PBUF_POOL_BUFSIZE
#define PBUF_POOL_BUFSIZE       128
#endif

/* PBUF_LINK_HLEN: the number of bytes that should be allocated for a
   link level header. */

#ifndef PBUF_LINK_HLEN
#define PBUF_LINK_HLEN          0
#endif



/* ---------- ARP options ---------- */

/** Number of active hardware address, IP address pairs cached */
#ifndef ARP_TABLE_SIZE
#define ARP_TABLE_SIZE 10
#endif

/**
 * If enabled, outgoing packets are queued during hardware address
 * resolution. The etharp.c implementation queues 1 packet only.
 */
#ifndef ARP_QUEUEING
#define ARP_QUEUEING 1
#endif
/**
 * If defined to 1, cache entries are updated or added for every kind of ARP traffic
 * or broadcast IP traffic. Recommended for routers.
 * If defined to 0, only existing cache entries are updated. Entries are added when
 * lwIP is sending to them. Recommended for embedded devices.
 */
#ifndef ETHARP_ALWAYS_INSERT
#define ETHARP_ALWAYS_INSERT 1
#endif

/* ---------- IP options ---------- */
/* Define IP_FORWARD to 1 if you wish to have the ability to forward
   IP packets across network interfaces. If you are going to run lwIP
   on a device with only one network interface, define this to 0. */
#ifndef IP_FORWARD
#define IP_FORWARD              0
#endif

/* If defined to 1, IP options are allowed (but not parsed). If
   defined to 0, all packets with IP options are dropped. */
#ifndef IP_OPTIONS
#define IP_OPTIONS              1
#endif

/** IP reassembly and segmentation. Even if they both deal with IP
 *  fragments, note that these are orthogonal, one dealing with incoming
 *  packets, the other with outgoing packets
 */

/** Reassemble incoming fragmented IP packets */
#ifndef IP_REASSEMBLY
#define IP_REASSEMBLY     1
#endif

/** Fragment outgoing IP packets if their size exceeds MTU */
#ifndef IP_FRAG
#define IP_FRAG           1
#endif

/* ---------- ICMP options ---------- */

#ifndef ICMP_TTL
#define ICMP_TTL                255
#endif

/* ---------- DHCP options ---------- */

#ifndef LWIP_DHCP
#define LWIP_DHCP               0
#endif

/* 1 if you want to do an ARP check on the offered address
   (recommended). */
#ifndef DHCP_DOES_ARP_CHECK
#define DHCP_DOES_ARP_CHECK     1
#endif

/* ---------- UDP options ---------- */
#define LWIP_UDP                1

#ifndef LWIP_UDP
#define LWIP_UDP                1
#endif

#ifndef UDP_TTL
#define UDP_TTL                 255
#endif

/* ---------- TCP options ---------- */
#define LWIP_TCP                1

#ifndef LWIP_TCP
#define LWIP_TCP                1
#endif

#ifndef TCP_TTL
#define TCP_TTL                 255
#endif

#ifndef TCP_WND
#define TCP_WND                 2048
#endif 

#ifndef TCP_MAXRTX
#define TCP_MAXRTX              12
#endif

#ifndef TCP_SYNMAXRTX
#define TCP_SYNMAXRTX           6
#endif


/* Controls if TCP should queue segments that arrive out of
   order. Define to 0 if your device is low on memory. */
#ifndef TCP_QUEUE_OOSEQ
#define TCP_QUEUE_OOSEQ         1
#endif

/* TCP Maximum segment size. */
#ifndef TCP_MSS
#define TCP_MSS                 128 /* A *very* conservative default. */
#endif

/* TCP sender buffer space (bytes). */
#ifndef TCP_SND_BUF
#define TCP_SND_BUF             256
#endif

/* TCP sender buffer space (pbufs). This must be at least = 2 *
   TCP_SND_BUF/TCP_MSS for things to work. */
#ifndef TCP_SND_QUEUELEN
#define TCP_SND_QUEUELEN        4 * TCP_SND_BUF/TCP_MSS
#endif


/* Maximum number of retransmissions of data segments. */

/* Maximum number of retransmissions of SYN segments. */

/* TCP writable space (bytes). This must be less than or equal
   to TCP_SND_BUF. It is the amount of space which must be
   available in the tcp snd_buf for select to return writable */
#ifndef TCP_SNDLOWAT
#define TCP_SNDLOWAT            TCP_SND_BUF/2
#endif




#ifndef LWIP_EVENT_API
#define LWIP_EVENT_API    0
#define LWIP_CALLBACK_API 1
#else 
#define LWIP_EVENT_API    1
#define LWIP_CALLBACK_API 0
#endif 

#ifndef LWIP_COMPAT_SOCKETS
#define LWIP_COMPAT_SOCKETS     1
#endif


#ifndef TCPIP_THREAD_PRIO
#define TCPIP_THREAD_PRIO 1
#endif

#ifndef SLIPIF_THREAD_PRIO
#define SLIPIF_THREAD_PRIO 1
#endif

#ifndef DEFAULT_THREAD_PRIO
#define DEFAULT_THREAD_PRIO 1
#endif
/* ---------- Statistics options ---------- */
#define LWIP_STATS	0

#ifndef LWIP_STATS
#define LWIP_STATS	1
#endif

#if LWIP_STATS

#define LINK_STATS
#define IP_STATS
#define ICMP_STATS
#define UDP_STATS
#define TCP_STATS
#define MEM_STATS
#define MEMP_STATS
#define PBUF_STATS
#define SYS_STATS

#endif /* LWIP_STATS */

/* Debugging options all default to off */

#ifndef DBG_TYPES_ON
#define DBG_TYPES_ON 0
#endif

#ifndef DEMO_DEBUG
#define DEMO_DEBUG      DBG_OFF
#endif

#ifndef ETHARP_DEBUG
#define ETHARP_DEBUG     DBG_OFF
#endif

#ifndef NETIF_DEBUG
#define NETIF_DEBUG      DBG_OFF
#endif

#ifndef PBUF_DEBUG
#define PBUF_DEBUG       DBG_OFF
#endif

#ifndef API_LIB_DEBUG
#define API_LIB_DEBUG    DBG_OFF
#endif

#ifndef API_MSG_DEBUG
#define API_MSG_DEBUG    DBG_OFF
#endif

#ifndef SOCKETS_DEBUG
#define SOCKETS_DEBUG    DBG_OFF
#endif

#ifndef ICMP_DEBUG
#define ICMP_DEBUG       DBG_OFF
#endif

#ifndef INET_DEBUG
#define INET_DEBUG       DBG_OFF
#endif

#ifndef IP_DEBUG
#define IP_DEBUG         DBG_OFF
#endif

#ifndef IP_REASS_DEBUG
#define IP_REASS_DEBUG   DBG_OFF
#endif

#ifndef MEM_DEBUG
#define MEM_DEBUG        DBG_OFF
#endif

#ifndef MEMP_DEBUG
#define MEMP_DEBUG       DBG_OFF
#endif

#ifndef SYS_DEBUG
#define SYS_DEBUG        DBG_OFF
#endif

#ifndef TCP_DEBUG
#define TCP_DEBUG        DBG_OFF
#endif

#ifndef TCP_INPUT_DEBUG
#define TCP_INPUT_DEBUG  DBG_OFF
#endif

#ifndef TCP_FR_DEBUG
#define TCP_FR_DEBUG     DBG_OFF
#endif

#ifndef TCP_RTO_DEBUG
#define TCP_RTO_DEBUG    DBG_OFF
#endif

#ifndef TCP_REXMIT_DEBUG
#define TCP_REXMIT_DEBUG DBG_OFF
#endif

#ifndef TCP_CWND_DEBUG
#define TCP_CWND_DEBUG   DBG_OFF
#endif

#ifndef TCP_WND_DEBUG
#define TCP_WND_DEBUG    DBG_OFF
#endif

#ifndef TCP_OUTPUT_DEBUG
#define TCP_OUTPUT_DEBUG DBG_OFF
#endif

#ifndef TCP_RST_DEBUG
#define TCP_RST_DEBUG    DBG_OFF
#endif

#ifndef TCP_QLEN_DEBUG
#define TCP_QLEN_DEBUG   DBG_OFF
#endif

#ifndef UDP_DEBUG
#define UDP_DEBUG        DBG_OFF
#endif

#ifndef TCPIP_DEBUG
#define TCPIP_DEBUG      DBG_OFF
#endif

#ifndef SLIP_DEBUG 
#define SLIP_DEBUG       DBG_OFF
#endif

#ifndef DHCP_DEBUG 
#define DHCP_DEBUG       DBG_OFF
#endif


#ifndef DBG_MIN_LEVEL
#define DBG_MIN_LEVEL DBG_LEVEL_OFF
#endif

#endif /* __LWIP_OPT_H__ */