usb_task.c

基于at90usb1287的数据存储器例子

// ---- REDUCED HOST ONLY USB MODE ---------------------------------------------
#elif ((USB_DEVICE_FEATURE == DISABLE)&& (USB_HOST_FEATURE == ENABLED))
   usb_host_task();
// -----------------------------------------------------------------------------

//! ---- ERROR, NO MODE ENABLED -------------------------------------------------
#elif ((USB_DEVICE_FEATURE == DISABLE)&& (USB_HOST_FEATURE == DISABLE))
   #error  at least one of USB_DEVICE_FEATURE or USB_HOST_FEATURE should be enabled
   #error  otherwise the usb task has nothing to do ...
#endif
// -----------------------------------------------------------------------------

}

//! @brief USB interrupt subroutine
//!
//! This function is called each time a USB interrupt occurs.
//! The following USB DEVICE events are taken in charge:
//! - VBus On / Off
//! - Start Of Frame
//! - Suspend
//! - Wake-Up
//! - Resume
//! - Reset
//! - Start of frame
//!
//! The following USB HOST events are taken in charge:
//! - Device connection
//! - Device Disconnection
//! - Start Of Frame
//! - ID pin change
//! - SOF (or Keep alive in low speed) sent
//! - Wake up on USB line detected
//!
//! For each event, the user can launch an action by completing
//! the associate define (See conf_usb.h file to add action upon events)
//!
//! Note: Only interrupts events that are enabled are processed
//!
//! @param none
//!
//! @return none
#ifdef AVRGCC
 ISR(USB_GEN_vect)
#else
#pragma vector = USB_GENERAL_vect
__interrupt void usb_general_interrupt()
#endif
{
   #if (USB_HOST_PIPE_INTERRUPT_TRANSFER == ENABLE)
   U8 i;
   U8 save_pipe_nb;
   #endif
// ---------- DEVICE events management -----------------------------------
#if (USB_DEVICE_FEATURE == ENABLED)
  //- VBUS state detection
   if (Is_usb_vbus_transition() && Is_usb_vbus_interrupt_enabled())
   {
      Usb_ack_vbus_transition();
      if (Is_usb_vbus_high())
      {
         usb_connected = TRUE;
         Usb_vbus_on_action();
         Usb_send_event(EVT_USB_POWERED);
			Usb_enable_reset_interrupt();
         usb_start_device();
			Usb_attach();
      }
      else
      {
         Usb_vbus_off_action();
         usb_connected = FALSE;
         usb_configuration_nb = 0;
         Usb_send_event(EVT_USB_UNPOWERED);
      }
   }
  // - Device start of frame received
   if (Is_usb_sof() && Is_sof_interrupt_enabled())
   {
      Usb_ack_sof();
      Usb_sof_action();
   }
  // - Device Suspend event (no more USB activity detected)
   if (Is_usb_suspend() && Is_suspend_interrupt_enabled())
   {
      Usb_ack_suspend();
      Usb_enable_wake_up_interrupt();
      Usb_ack_wake_up();                 // clear wake up to detect next event
      Usb_freeze_clock();
      Usb_send_event(EVT_USB_SUSPEND);
      Usb_suspend_action();
   }
  // - Wake up event (USB activity detected): Used to resume
   if (Is_usb_wake_up() && Is_swake_up_interrupt_enabled())
   {
      Usb_unfreeze_clock();
      Usb_ack_wake_up();
      Usb_disable_wake_up_interrupt();
      Usb_wake_up_action();
      Usb_send_event(EVT_USB_WAKE_UP);
   }
  // - Resume state bus detection
   if (Is_usb_resume() && Is_resume_interrupt_enabled())
   {
      Usb_disable_wake_up_interrupt();
      Usb_ack_resume();
      Usb_disable_resume_interrupt();
      Usb_resume_action();
      Usb_send_event(EVT_USB_RESUME);
   }
  // - USB bus reset detection
   if (Is_usb_reset()&& Is_reset_interrupt_enabled())
   {
      Usb_ack_reset();
      usb_init_device();
      Usb_reset_action();
      Usb_send_event(EVT_USB_RESET);
   }
#endif// End DEVICE FEATURE MODE

// ---------- HOST events management -----------------------------------
#if (USB_HOST_FEATURE == ENABLED && USB_DEVICE_FEATURE == ENABLED)
  // - ID pin change detection
   if(Is_usb_id_transition()&&Is_usb_id_interrupt_enabled())
   {
      if(Is_usb_id_device())
      { g_usb_mode=USB_MODE_DEVICE;}
      else
      { g_usb_mode=USB_MODE_HOST;}
      Usb_ack_id_transition();
      if( g_usb_mode != g_old_usb_mode) // Basic Debounce
      {
         if(Is_usb_id_device()) // Going to device mode
         {
            Usb_send_event(EVT_USB_DEVICE_FUNCTION);
         }
         else                   // Going to host mode
         {
            Usb_send_event(EVT_USB_HOST_FUNCTION);
         }
         Usb_id_transition_action();
         LOG_STR_CODE(log_id_change);
         #if ( ID_PIN_CHANGE_GENERATE_RESET == ENABLE)
        // Hot ID transition generates wdt reset
            #ifndef  AVRGCC
               Wdt_change_16ms(); while(1);
            #else
               Wdt_change_enable(); while(1);
            #endif
         #endif
      }
   }
#endif
#if (USB_HOST_FEATURE == ENABLED)
  // - The device has been disconnected
   if(Is_device_disconnection() && Is_host_device_disconnection_interrupt_enabled())
   {
      host_disable_all_pipe();
      Host_ack_device_disconnection();
      device_state=DEVICE_DISCONNECTED;
      Usb_send_event(EVT_HOST_DISCONNECTION);
      LOG_STR_CODE(log_device_disconnect);
      Host_device_disconnection_action();
   }
  // - Device connection
   if(Is_device_connection() && Is_host_device_connection_interrupt_enabled())
   {
      Host_ack_device_connection();
      host_disable_all_pipe();
      Host_device_connection_action();
   }
  // - Host Start of frame has been sent
   if (Is_host_sof() && Is_host_sof_interrupt_enabled())
   {
      Host_ack_sof();
      Usb_send_event(EVT_HOST_SOF);
      private_sof_counter++;

      // delay timeout management for interrupt tranfer mode in host mode
      #if ((USB_HOST_PIPE_INTERRUPT_TRANSFER==ENABLE) && (TIMEOUT_DELAY_ENABLE==ENABLE))
      if (private_sof_counter>=250)   // Count 1/4 sec
      {
         private_sof_counter=0;
         for(i=0;i<MAX_EP_NB;i++)
         {
            if(it_pipe_str[i].enable==ENABLE)
            {
               save_pipe_nb=Host_get_selected_pipe();
               Host_select_pipe(i);
               if((++it_pipe_str[i].timeout>TIMEOUT_DELAY) && (Host_get_pipe_type()!=TYPE_INTERRUPT))
               {
                  it_pipe_str[i].enable=DISABLE;
                  it_pipe_str[i].status=PIPE_DELAY_TIMEOUT;
                  Host_stop_pipe_interrupt(i);
                  if (is_any_interrupt_pipe_active()==FALSE)    // If no more transfer is armed
                  {
                     if (g_sav_int_sof_enable==FALSE)
                     {
                        Host_disable_sof_interrupt();
                     }
                  }
                  it_pipe_str[i].handle(PIPE_DELAY_TIMEOUT,it_pipe_str[i].nb_byte_processed);
               }
               Host_select_pipe(save_pipe_nb);
            }
         }
      }
      #endif  // (USB_HOST_PIPE_INTERRUPT_TRANSFER==ENABLE) && (TIMEOUT_DELAY_ENABLE==ENABLE))
      Host_sof_action();
   }
  // - Host Wake-up has been received
   if (Is_host_hwup() && Is_host_hwup_interrupt_enabled())
   {
      Host_disable_hwup_interrupt();  // Wake up interrupt should be disable host is now wake up !
      // CAUTION HWUP can be cleared only when USB clock is active (not frozen)!
      Pll_start_auto();               // First Restart the PLL for USB operation
      Wait_pll_ready();               // Get sure pll is lock
      Usb_unfreeze_clock();           // Enable clock on USB interface
      Host_ack_hwup();                // Clear HWUP interrupt flag
      Usb_send_event(EVT_HOST_HWUP);  // Send software event
      Host_hwup_action();             // Map custom action
   }
#endif // End HOST FEATURE MODE
}


extern void suspend_action(void)
{
   Enable_interrupt();
   Enter_power_down_mode();
}

extern void host_suspend_action(void)
{
   //Enter_power_down_mode();  //For example...
}