readme.w2k

with serial bus (Universal Serial Bus) is used to apply USB peripherals connected to the mainframe e

How to install PCMCIA/IDE or Cardbus/IDE driver in Window 2000 environment?

1. For first time user:
   When inserting the pcmcia card with device, a "New Hardware Found" message 
   shall pops up.  Select "Next" to continue installation.  
   Select "Search for a suitable driver...." button and select "Next".
   In "select a Device Driver page", user can choose either 
   "PCMCIA ATA/ATAPI Controler" that shall install the default driver or 
   user can select "Have Disk" to specify location.
   Enter path like "a:\win2000".
   Select either "Shining PCMCIA...." or "Shining Cardbus....".
   Let Win2000 to finish the installation and that's it.
2. For those user already install the driver but not working:
   Go to "Control Panel", "Device Manager", within "IDE ATA/ATAPI Controller" 
   folder, shall find "Shining PCMCIA...." yellow marked or 
   "PCMCIA ATA/ATAPI Controller" which they must be installed by using default 
   driver earlier.
   Double clik it, select "Driver" tab, select "Update Driver", select "Next" to
     continue.
   Select "Display a list of known driver...." button and select "Next".
   In "select a Device Driver page", user can choose either "PCMCIA ATA/ATAPI 
   Controler" that shall install the default driver or use can select 
   "Have Disk" to specify location.
   Enter path like "a:\win2000".
   Select either "Shining PCMCIA...." or "Shining Cardbus....".
   Let Win2000 to finish the installation and that's it.

 
   Note:  "Shining PCMCIA/IDE Controller Win2000" is made for PCMICA mode
		  IDE controller.
          "Shining Cardbus/IDE Controller Win2000" is made for Cardbus mode
		  IDE controller.