oemsetnt.old

with serial bus (Universal Serial Bus) is used to apply USB peripherals connected to the mainframe e

    set Tag              =   #(MiniportDrivers, $(MiniportDriver), 4)
    set EventMessageFile =   #(MiniportDrivers, $(MiniportDriver), 5)
    set TypesSupported   =   #(MiniportDrivers, $(MiniportDriver), 6)

    set Start            =   $(!SERVICE_BOOT_START)

installtheoption = +

    ;
    ; Code to add files to copy list
    ;

    ifstr(i) $(AddCopy) == "YES"
        set DoActualCopy = NO
        set FileToCheck = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
        LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
        ifstr(i) $(STATUS) == NO
            set DoActualCopy = YES
        endif

        ifstr(i) $(DoActualCopy) == NO
            shell "subroutn.inf" DriversExist $($0) $(String1)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "SCSI.INF: shelling DriversExist failed"
                goto finish_InstallOption
            endif

            ifstr(i) $($R0) == STATUS_CURRENT
            else-ifstr(i) $($R0) == STATUS_NEW
                set DoActualCopy = YES
            else-ifstr(i) $($R0) == STATUS_USERCANCEL
                Debug-Output "SCSI.INF: User cancelled SCSI installation"
                goto finish_InstallOption
            else
                Debug-Output "SCSI.INF: Error reported in DriversExist routine in SUBROUTN.INF"
                goto finish_InstallOption
            endif
        endif

        ifstr(i) $(DoActualCopy) == YES

            shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "SCSI.INF: shelling DoAskSourceEx failed"
                goto finish_InstallOption
            endif

            ifstr(i) $($R0) == STATUS_SUCCESSFUL
                set SrcDir = $($R1)
                ifstr(i) $($R2) != ""
                    set DrivesToFree = >($(DrivesToFree), $($R2))
                endif
            else
                Debug-Output "SCSI.INF: User cancelled asking source."
                goto finish_InstallOption
            endif

            install Install-AddCopyOption
            ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
                Debug-Output "Adding SCSI files to copy list failed"
                goto finish_InstallOption
            endif
        else
            set DoCopy = NO
        endif

    endif

    ifstr(i) $(DoCopy) == "YES"
        read-syms ProgressCopy$($0)
        install Install-DoCopyOption
        ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
            Debug-Output "Copying files failed"
            goto finish_InstallOption
        else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
            set Status = STATUS_USERCANCEL
            goto finish_InstallOption
        endif
    endif

    ifstr(i) $(DoConfig) == "YES"
        ;
        ; first run a privilege check on modifying the setup node
        ;

        shell "registry.inf" CheckSetupModify
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto finish_InstallOption
        endif

        ifstr(i) $($R0) != STATUS_SUCCESSFUL
            goto finish_InstallOption
        endif

        ;
        ; then make a new SCSI entry, the entry is created automatically
        ; enabled
        ;

        set ServiceNode   = $(MiniportDriver)
        set ServiceBinary = System32\drivers\#(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)

        set ServicesValues   = { +
                {Type,           0, $(!REG_VT_DWORD),     $(Type)                  }, +
                {Start,          0, $(!REG_VT_DWORD),     $(Start)                 }, +
                {Group,          0, $(!REG_VT_SZ),        $(Group)                 }, +
                {ErrorControl,   0, $(!REG_VT_DWORD),     $(ErrorControl)          }, +
                {Tag,            0, $(!REG_VT_DWORD),     $(Tag)                   }, +
                {BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary)         }  +
                }
        set ParametersValues = ""
        set DeviceValues     = {}
        set EventLogValues   = { +
                {EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
                {TypesSupported,   0, $(!REG_VT_DWORD),     $(TypesSupported)   }  +
                }

        shell "registry.inf"  MakeServicesEntry $(ServiceNode)      +
                                                $(ServicesValues)   +
                                                $(ParametersValues) +
                                                $(DeviceValues)     +
                                                $(EventLogValues)   +
                                                Parameters



        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
            goto finish_InstallOption
        endif

        ifstr(i) $($R0) != STATUS_SUCCESSFUL
            Debug-Output "MakeServicesEntry failed for SCSI"
            goto finish_InstallOption
        endif

    endif

    set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
    ForListDo $(DrivesToFree)
        LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
    EndForListDo

    Return $(Status)


[Install-AddCopyOption]

    ;
    ; Add the files to the copy list
    ;
    AddSectionKeyFileToCopyList   Files-ScsiMiniportDrivers         +
                                  $(MiniportDriver)                 +
                                  $(SrcDir)                      +
                                  $(!STF_WINDOWSSYSPATH)\drivers

    exit


[Install-DoCopyOption]

    ;
    ; Copy files in the copy list
    ;
    CopyFilesInCopyList
    exit

;-------------------------------------------------------------------------
; 4. DeInstallOption:
;
; FUNCTION:  To remove files representing Option
;            To remove the registry entry corresponding to the Option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;-------------------------------------------------------------------------
[DeInstallOption]
    ;
    ; Set default values for
    ;
    set Status   = STATUS_FAILED
    ;
    ; extract parameters
    ;
    set Option   = $($1)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_DeInstallOption
    endif
    read-syms Strings$($0)

    ;
    ; check to see if Option is supported.
    ;

    set OptionList = ^(Options, 0)
    ifcontains $(Option) in $(OptionList)
    else
        goto finish_DeInstallOption
    endif
    set OptionList = ""

    ;
    ; fetch details about option
    ;

    set MiniportDriver = #(Options, $(Option), 1)
    set MiniportFile   = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
    set FilePath       = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)

    ;
    ; check to see if file is installed
    ; if not give success
    ;

    LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
    ifstr(i) $(STATUS) == "NO"
        set Status = STATUS_SUCCESSFUL
        goto finish_DeInstallOption
    endif

    shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        ; this could happen if there is no start value or there is no
        ; key, in which case the option is not installed
        set Status = STATUS_SUCCESSFUL
        goto finish_DeInstallOption
    endif

    ifstr(i) $($R1) == $(!SERVICE_BOOT_START)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String3)
        ifstr(i) $($R0) != STATUS_SUCCESSFUL
            goto do_removal
        endif
        ifstr(i) $($R1) == "CANCEL"
            goto finish_DeInstallOption
        endif
    endif

do_removal =+
    ;
    ; disable the registry entry
    ;

    shell "registry.inf" RemoveServicesEntry $(MiniportDriver)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "SCSI.INF: Failed to shell RemoveServicesEntry"
        goto finish_DeInstallOption
    endif

    ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Debug-Output "SCSI.INF: Failed to disable services entry"
        goto finish_DeInstallOption
    endif

    ;
    ; we won't remove the file because we can only do so during the next boot.
    ; if the user chooses to reinstall the same driver during this boot
    ; he will still end up deleting the driver on next boot. if the file
    ; should be deleted a warning should be put up saying that the user should
    ; not try to reinstall the driver during this boot
    ;
    ;    AddFileToDeleteList $(FilePath)

    set Status = STATUS_SUCCESSFUL

finish_DeInstallOption =+
    return $(Status)


;-------------------------------------------------------------------------
; 5. GetInstalledOptions:
;
; FUNCTION:  To find out the list of options which are installed
;
; INPUT:     $($0): Language to Use
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_FAILED
;
;            $($R1): List of options installed
;            $($R2): Option installed Text List
;-------------------------------------------------------------------------
[GetInstalledOptions]
    set Status = STATUS_FAILED
    set InstalledOptions = {}
    set InstalledOptionsText = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_GetInstalledOptions
    endif

    set OptionList = ^(Options, 0)
    ForListDo $(OptionList)
        set MiniportDriver = #(Options, $($), 1)
        set MiniportFile   = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
        set FilePath       = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
        LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
        ifstr(i) $(STATUS) == "YES"
            shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
            ifint $($ShellCode) == $(!SHELL_CODE_OK)
                ifstr(i) $($R0) == STATUS_SUCCESSFUL
                    ifstr(i) $($R1) != $(!SERVICE_DISABLED)

                        set OptionText = #(OptionsText$($0), $($), 1)
                        set InstalledOptions     = >($(InstalledOptions), $($))
                        set InstalledOptionsText = >($(InstalledOptionsText), $(OptionText))

                    endif
                endif
            endif
        endif
    EndForListDo
    set Status = STATUS_SUCCESSFUL
finish_GetInstalledOptions =+
    Return $(Status) $(InstalledOptions) $(InstalledOptionsText)


;**************************************************************************
; PROGRESS GUAGE VARIABLES
;**************************************************************************

[ProgressCopyENG]
    ProCaption   = "Windows NT Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correcly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

[StringsENG]
    String1 = "SCSI Adapter"
    String2 = "Please enter the full path to the OEM SCSI "+
              "Adapter files.  Then choose Continue."
    String3 = "The SCSI Adapter has been marked as a boot device.  Removing "+
              "it may cause the system not to boot."$(!LF)$(!LF)"Are you sure "+
              "you want to remove the Adapter."

[Source Media Descriptions]
    1  = "Shining EIDE Software Diskette" , TAGFILE = steide

[Files-ScsiMiniportDrivers]
statpnt = 1, statpnt.sys , SIZE=23552
stcbint = 1, statpnt.sys , SIZE=23552