eph1610.h

主要是EHP1610的驱动程序

/**************************************************************************
Copyright (C) 广东天波信息技术有限公司　版权所有		    
文 件 名：	   		 头文件 
创 建 人：	       刘光根 
创建时间：	  	   2008-10-15
功能描述：	   
**************************************************************************/

#ifndef __ePH1610_H
#define __ePH1610_H
//====================================
//=====UART1=内部寄存器位定义详细说明请看Spec========================
//====================================
#define IER_RBR		0x01
#define IER_THRE	0x02
#define IER_RLS		0x04

#define IIR_RLS		0x06
#define IIR_RDA		0x04
#define IIR_CTI		0x0c
#define IIR_THRE	0x02

#define LSR_RDR		0x01
#define LSR_OE		0x02
#define LSR_PE		0x04
#define LSR_FE		0x08
#define LSR_BI		0x10
#define LSR_THRE	0x20
#define LSR_TEMT	0x40
#define LSR_RXFE	0x80

#define BUFSIZE1	0xFF
#define BUFSIZE2    0XFF

//====================================
//====================================

#define P1_LCDCS0   0
#define P1_LCDRES   1
#define P3_LCDA0    0
#define P3_LCDSCK   1
#define P3_LCDSDA   2
#define P3_LCDLight 30

//====================================
unsigned char   GenerateCRC(unsigned char *Packet,int size);
unsigned char   SetWakeup(void);
unsigned char   SetCharactorMode(unsigned char  mode,unsigned char  type) ;
unsigned char   SwitchInking(unsigned char  mode) ;
unsigned char   SetPenupTime(unsigned char Tms) ;
unsigned char   ImmediateRecognition(void);
unsigned char   SetHostReady(void) ;
unsigned char   SwitchEven(unsigned char even) ;
unsigned char   SetPenTimeOffset(unsigned char  offset) ;
unsigned char   DifferentCodeTab(unsigned char  mode);		   //SwitchCodeTab();
unsigned char   AbortcurrentInking(void) ;
unsigned char   SetWtiteArea(unsigned char left,unsigned char top,unsigned char right,unsigned char bottom);
unsigned char   SwitchGraphicMode(unsigned char  mode);
unsigned char   SetIdleTime(unsigned char idle);
unsigned char   SetRotateMode(unsigned char mode);

unsigned char  ReceiveCommannd(void) ;
unsigned char  CheckReceiveOk(unsigned char  *buf,unsigned char *str) ;
char  WriteAndWait(unsigned char *buf,unsigned char *ptr);
unsigned char WaitingInkData(void);

void  ePh1610Reset(void);
unsigned char  ePH1610main(void);
char  InitePH1610(void) ;

void Delayms(unsigned int data32) ;
void wpin(unsigned char  PortNum, unsigned char  BitNum, unsigned char  BitVal);
void PLLInit(void);
void Interruptint(void);
void   __irq IRQ_UART1(void);
void  UART1Init( void );
void SendCommand(unsigned char *buf,unsigned char num);
unsigned char  ProcessePH1610(void);

 void LCDInit(void);
 void WriteData(int data);
 void WriteCommand(int command);
 void DispClear(int num);
 void DispAddr_page(int page,int colu);
 void DispAddr_line(int row,int colu);
 void Dispdatawrite(int row,int colu,int data8);
 void DispColu(int colu);
 void DispPage(int page);
 void DispLine(int  row);

#endif