vco.xml

来自「springer_-modeling_and_simulation_for_rf」· XML 代码 · 共 64 行

<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml-stylesheet href="/usr/local/vamdoc-1.0.2-kluwer/config/model.xsl" type="text/xsl"?>
<!DOCTYPE model SYSTEM "/usr/local/vamdoc-1.0.2-kluwer/config/model.dtd"><model>
  <symbol>../symbol/vco.png</symbol>
  <comments>
    <title>Analog Voltage Controlled Oscillator</title>
    <model_name>VCO(BASIC)</model_name>
    <library>N/A</library>
    <structure>N/A</structure>
    <description>The model describes a VCO. The frequency of the output voltage<br></br>source is controlled by the input voltage. The frequency equals <br></br>KF*VIN + F0.<br></br><br></br></description>
    <link_source><A HREF="../src/vco.vhd">See source code</A></link_source>
    <dependency>
      <library>IEEE_proposed</library>
      <design_unit>ELECTRICAL_SYSTEMS</design_unit>
    </dependency>
    <dependency>
      <library>IEEE</library>
      <design_unit>MATH_REAL</design_unit>
    </dependency>
  </comments>
  <interface>
    <parameter>
      <name>F0</name>
      <type>REAL</type>
      <default>1.0</default>
      <unit>Hz</unit>
      <comment> center frequency </comment>
    </parameter>
    <parameter>
      <name>KF</name>
      <type>REAL</type>
      <default>1.0</default>
      <unit>Hz/V</unit>
      <comment> gain </comment>
    </parameter>
    <parameter>
      <name>AMPL</name>
      <type>REAL</type>
      <default>1.0</default>
      <unit>V</unit>
      <comment> amplitude </comment>
    </parameter>
    <parameter>
      <name>PHI0</name>
      <type>REAL</type>
      <default>0.0</default>
      <unit>rad</unit>
      <comment> initial phase </comment>
    </parameter>
    <port>
      <port_id>terminal</port_id>
      <name>INP</name>
      <port_type>ELECTRICAL</port_type>
      <comment> input terminal</comment>
    </port>
    <port>
      <port_id>terminal</port_id>
      <name>OUTP</name>
      <port_type>ELECTRICAL</port_type>
      <comment> output terminal</comment>
    </port>
  </interface>
</model>