lcd.opt

串行存储芯片AT45DB161B的驱动程序

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,0,0,1,21,0,<.\lcd.c><lcd.c> { 44,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,179,2,0,0,252,255,255,255,228,255,255,255,0,0,0,0,0,0,0,0,146,3,0,0,234,1,0,0 }
OPTFFF 1,2,1,1,0,0,0,0,<.\SPI.C><SPI.C> 
OPTFFF 1,3,1,1,0,55,55,0,<.\uart.c><uart.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,0,0,0,0,0,0,0,0,212,3,0,0,93,1,0,0 }
OPTFFF 1,4,1,0,0,91,91,0,<.\DECODE.C><DECODE.C> { 44,0,0,0,0,0,0,0,1,0,0,0,64,1,0,0,179,2,0,0,252,255,255,255,228,255,255,255,22,0,0,0,29,0,0,0,168,3,0,0,7,2,0,0 }
OPTFFF 1,5,1,0,0,9,9,0,<.\READATTOSUB.C><READATTOSUB.C> { 44,0,0,0,0,0,0,0,1,0,0,0,224,1,0,0,179,2,0,0,252,255,255,255,228,255,255,255,66,0,0,0,87,0,0,0,216,3,0,0,66,2,0,0 }

ExtF <.\CONFIG.H> 35,35,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,176,0,0,0,232,0,0,0,70,4,0,0,211,2,0,0 }
ExtF <C:\KEIL\C51\INC\WINBOND\REG54.H> 73,84,0,{ 44,0,0,0,2,0,0,0,2,0,0,0,0,0,0,0,155,1,0,0,252,255,255,255,228,255,255,255,0,0,0,0,0,0,0,0,150,3,0,0,235,1,0,0 }
ExtF <.\SPI.H> 3,3,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,22,0,0,0,29,0,0,0,238,3,0,0,123,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=22118400
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTLT 1,1,1,0,1,1,0,1,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\WINBOND\W78E516B.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\Infineon\M500.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p53)(S8051.DLL)()(TP51.DLL)(-p53)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTDF 0x0
  OPTLE <>
  OPTLC <>
EndOpt