⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ar5212_interrupts.c

📁 最新之atheros芯片driver source code, 基于linux操作系统,內含atheros芯片HAL全部代码
💻 C
字号:
/* * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * Copyright (c) 2002-2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $Id: ar5212_interrupts.c,v 1.6 2008/11/27 22:30:00 sam Exp $ */#include "opt_ah.h"#include "ah.h"#include "ah_internal.h"#include "ar5212/ar5212.h"#include "ar5212/ar5212reg.h"#include "ar5212/ar5212phy.h"/* * Checks to see if an interrupt is pending on our NIC * * Returns: TRUE    if an interrupt is pending *          FALSE   if not */HAL_BOOLar5212IsInterruptPending(struct ath_hal *ah){	/* 	 * Some platforms trigger our ISR before applying power to	 * the card, so make sure the INTPEND is really 1, not 0xffffffff.	 */	return (OS_REG_READ(ah, AR_INTPEND) == AR_INTPEND_TRUE);}/* * Reads the Interrupt Status Register value from the NIC, thus deasserting * the interrupt line, and returns both the masked and unmasked mapped ISR * values.  The value returned is mapped to abstract the hw-specific bit * locations in the Interrupt Status Register. * * Returns: A hardware-abstracted bitmap of all non-masked-out *          interrupts pending, as well as an unmasked value */HAL_BOOLar5212GetPendingInterrupts(struct ath_hal *ah, HAL_INT *masked){	uint32_t isr, isr0, isr1;	uint32_t mask2=0;	struct ath_hal_5212 *ahp = AH5212(ah);	isr = OS_REG_READ(ah, AR_ISR);	if (isr & AR_ISR_BCNMISC) {		uint32_t isr2;		isr2 = OS_REG_READ(ah, AR_ISR_S2);		if (isr2 & AR_ISR_S2_TIM)			mask2 |= HAL_INT_TIM;		if (isr2 & AR_ISR_S2_DTIM)			mask2 |= HAL_INT_DTIM;		if (isr2 & AR_ISR_S2_DTIMSYNC)			mask2 |= HAL_INT_DTIMSYNC;		if (isr2 & (AR_ISR_S2_CABEND ))			mask2 |= HAL_INT_CABEND;	}	isr = OS_REG_READ(ah, AR_ISR_RAC);	if (isr == 0xffffffff) {		*masked = 0;		return AH_FALSE;;	}	*masked = isr & HAL_INT_COMMON;	if (isr & AR_ISR_HIUERR)		*masked |= HAL_INT_FATAL;	if (isr & (AR_ISR_RXOK | AR_ISR_RXERR))		*masked |= HAL_INT_RX;	if (isr & (AR_ISR_TXOK | AR_ISR_TXDESC | AR_ISR_TXERR | AR_ISR_TXEOL)) {		*masked |= HAL_INT_TX;		isr0 = OS_REG_READ(ah, AR_ISR_S0_S);		ahp->ah_intrTxqs |= MS(isr0, AR_ISR_S0_QCU_TXOK);		ahp->ah_intrTxqs |= MS(isr0, AR_ISR_S0_QCU_TXDESC);		isr1 = OS_REG_READ(ah, AR_ISR_S1_S);		ahp->ah_intrTxqs |= MS(isr1, AR_ISR_S1_QCU_TXERR);		ahp->ah_intrTxqs |= MS(isr1, AR_ISR_S1_QCU_TXEOL);	}	/*	 * Receive overrun is usually non-fatal on Oahu/Spirit.	 * BUT on some parts rx could fail and the chip must be reset.	 * So we force a hardware reset in all cases.	 */	if ((isr & AR_ISR_RXORN) && AH_PRIVATE(ah)->ah_rxornIsFatal) {		HALDEBUG(ah, HAL_DEBUG_ANY,		    "%s: receive FIFO overrun interrupt\n", __func__);		*masked |= HAL_INT_FATAL;	}	*masked |= mask2;	/*	 * On fatal errors collect ISR state for debugging.	 */	if (*masked & HAL_INT_FATAL) {		AH_PRIVATE(ah)->ah_fatalState[0] = isr;		AH_PRIVATE(ah)->ah_fatalState[1] = OS_REG_READ(ah, AR_ISR_S0_S);		AH_PRIVATE(ah)->ah_fatalState[2] = OS_REG_READ(ah, AR_ISR_S1_S);		AH_PRIVATE(ah)->ah_fatalState[3] = OS_REG_READ(ah, AR_ISR_S2_S);		AH_PRIVATE(ah)->ah_fatalState[4] = OS_REG_READ(ah, AR_ISR_S3_S);		AH_PRIVATE(ah)->ah_fatalState[5] = OS_REG_READ(ah, AR_ISR_S4_S);		HALDEBUG(ah, HAL_DEBUG_ANY,		    "%s: fatal error, ISR_RAC=0x%x ISR_S2_S=0x%x\n",		    __func__, isr, AH_PRIVATE(ah)->ah_fatalState[3]);	}	return AH_TRUE;}HAL_INTar5212GetInterrupts(struct ath_hal *ah){	return AH5212(ah)->ah_maskReg;}/* * Atomically enables NIC interrupts.  Interrupts are passed in * via the enumerated bitmask in ints. */HAL_INTar5212SetInterrupts(struct ath_hal *ah, HAL_INT ints){	struct ath_hal_5212 *ahp = AH5212(ah);	uint32_t omask = ahp->ah_maskReg;	uint32_t mask,mask2;	HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: 0x%x => 0x%x\n",	    __func__, omask, ints);	if (omask & HAL_INT_GLOBAL) {		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: disable IER\n", __func__);		OS_REG_WRITE(ah, AR_IER, AR_IER_DISABLE);		(void) OS_REG_READ(ah, AR_IER);   /* flush write to HW */	}	mask = ints & HAL_INT_COMMON;	mask2 = 0;	if (ints & HAL_INT_TX) {		if (ahp->ah_txOkInterruptMask)			mask |= AR_IMR_TXOK;		if (ahp->ah_txErrInterruptMask)			mask |= AR_IMR_TXERR;		if (ahp->ah_txDescInterruptMask)			mask |= AR_IMR_TXDESC;		if (ahp->ah_txEolInterruptMask)			mask |= AR_IMR_TXEOL;	}	if (ints & HAL_INT_RX)		mask |= AR_IMR_RXOK | AR_IMR_RXERR | AR_IMR_RXDESC;	if (ints & (HAL_INT_BMISC)) {		mask |= AR_IMR_BCNMISC;		if (ints & HAL_INT_TIM)			mask2 |= AR_IMR_S2_TIM;		if (ints & HAL_INT_DTIM)			mask2 |= AR_IMR_S2_DTIM;		if (ints & HAL_INT_DTIMSYNC)			mask2 |= AR_IMR_S2_DTIMSYNC;		if (ints & HAL_INT_CABEND)			mask2 |= (AR_IMR_S2_CABEND );	}	if (ints & HAL_INT_FATAL) {		/*		 * NB: ar5212Reset sets MCABT+SSERR+DPERR in AR_IMR_S2		 *     so enabling HIUERR enables delivery.		 */		mask |= AR_IMR_HIUERR;	}	/* Write the new IMR and store off our SW copy. */	HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: new IMR 0x%x\n", __func__, mask);	OS_REG_WRITE(ah, AR_IMR, mask);	OS_REG_WRITE(ah, AR_IMR_S2, 				 (OS_REG_READ(ah, AR_IMR_S2) & 				  ~(AR_IMR_S2_TIM |					AR_IMR_S2_DTIM |					AR_IMR_S2_DTIMSYNC |					AR_IMR_S2_CABEND |					AR_IMR_S2_CABTO  |					AR_IMR_S2_TSFOOR ) ) 				 | mask2);	ahp->ah_maskReg = ints;	/* Re-enable interrupts if they were enabled before. */	if (ints & HAL_INT_GLOBAL) {		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: enable IER\n", __func__);		OS_REG_WRITE(ah, AR_IER, AR_IER_ENABLE);	}	return omask;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -