ar5212_xmit.c.svn-base

最新之atheros芯片driver source code, 基于linux操作系统,內含atheros芯片HAL全部代码

/*
 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
 * Copyright (c) 2002-2008 Atheros Communications, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 * $Id: ar5212_xmit.c,v 1.7 2008/11/10 04:08:03 sam Exp $
 */
#include "opt_ah.h"

#include "ah.h"
#include "ah_internal.h"

#include "ar5212/ar5212.h"
#include "ar5212/ar5212reg.h"
#include "ar5212/ar5212desc.h"
#include "ar5212/ar5212phy.h"
#ifdef AH_SUPPORT_5311
#include "ar5212/ar5311reg.h"
#endif

#ifdef AH_NEED_DESC_SWAP
static void ar5212SwapTxDesc(struct ath_desc *ds);
#endif

/*
 * Update Tx FIFO trigger level.
 *
 * Set bIncTrigLevel to TRUE to increase the trigger level.
 * Set bIncTrigLevel to FALSE to decrease the trigger level.
 *
 * Returns TRUE if the trigger level was updated
 */
HAL_BOOL
ar5212UpdateTxTrigLevel(struct ath_hal *ah, HAL_BOOL bIncTrigLevel)
{
	struct ath_hal_5212 *ahp = AH5212(ah);
	uint32_t txcfg, curLevel, newLevel;
	HAL_INT omask;

	/*
	 * Disable interrupts while futzing with the fifo level.
	 */
	omask = ar5212SetInterrupts(ah, ahp->ah_maskReg &~ HAL_INT_GLOBAL);

	txcfg = OS_REG_READ(ah, AR_TXCFG);
	curLevel = MS(txcfg, AR_FTRIG);
	newLevel = curLevel;
	if (bIncTrigLevel) {		/* increase the trigger level */
		if (curLevel < MAX_TX_FIFO_THRESHOLD)
			newLevel++;
	} else if (curLevel > MIN_TX_FIFO_THRESHOLD)
		newLevel--;
	if (newLevel != curLevel)
		/* Update the trigger level */
		OS_REG_WRITE(ah, AR_TXCFG,
			(txcfg &~ AR_FTRIG) | SM(newLevel, AR_FTRIG));

	/* re-enable chip interrupts */
	ar5212SetInterrupts(ah, omask);

	return (newLevel != curLevel);
}

/*
 * Set the properties of the tx queue with the parameters
 * from qInfo.  
 */
HAL_BOOL
ar5212SetTxQueueProps(struct ath_hal *ah, int q, const HAL_TXQ_INFO *qInfo)
{
	struct ath_hal_5212 *ahp = AH5212(ah);
	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;

	if (q >= pCap->halTotalQueues) {
		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
		    __func__, q);
		return AH_FALSE;
	}
	return ath_hal_setTxQProps(ah, &ahp->ah_txq[q], qInfo);
}

/*
 * Return the properties for the specified tx queue.
 */
HAL_BOOL
ar5212GetTxQueueProps(struct ath_hal *ah, int q, HAL_TXQ_INFO *qInfo)
{
	struct ath_hal_5212 *ahp = AH5212(ah);
	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;


	if (q >= pCap->halTotalQueues) {
		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
		    __func__, q);
		return AH_FALSE;
	}
	return ath_hal_getTxQProps(ah, qInfo, &ahp->ah_txq[q]);
}

/*
 * Allocate and initialize a tx DCU/QCU combination.
 */
int
ar5212SetupTxQueue(struct ath_hal *ah, HAL_TX_QUEUE type,
	const HAL_TXQ_INFO *qInfo)
{
	struct ath_hal_5212 *ahp = AH5212(ah);
	HAL_TX_QUEUE_INFO *qi;
	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
	int q, defqflags;

	/* by default enable OK+ERR+DESC+URN interrupts */
	defqflags = HAL_TXQ_TXOKINT_ENABLE
		  | HAL_TXQ_TXERRINT_ENABLE
		  | HAL_TXQ_TXDESCINT_ENABLE
		  | HAL_TXQ_TXURNINT_ENABLE;
	/* XXX move queue assignment to driver */
	switch (type) {
	case HAL_TX_QUEUE_BEACON:
		q = pCap->halTotalQueues-1;	/* highest priority */
		defqflags |= HAL_TXQ_DBA_GATED
		       | HAL_TXQ_CBR_DIS_QEMPTY
		       | HAL_TXQ_ARB_LOCKOUT_GLOBAL
		       | HAL_TXQ_BACKOFF_DISABLE;
		break;
	case HAL_TX_QUEUE_CAB:
		q = pCap->halTotalQueues-2;	/* next highest priority */
		defqflags |= HAL_TXQ_DBA_GATED
		       | HAL_TXQ_CBR_DIS_QEMPTY
		       | HAL_TXQ_CBR_DIS_BEMPTY
		       | HAL_TXQ_ARB_LOCKOUT_GLOBAL
		       | HAL_TXQ_BACKOFF_DISABLE;
		break;
	case HAL_TX_QUEUE_UAPSD:
		q = pCap->halTotalQueues-3;	/* nextest highest priority */
		if (ahp->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE) {
			HALDEBUG(ah, HAL_DEBUG_ANY,
			    "%s: no available UAPSD tx queue\n", __func__);
			return -1;
		}
		break;
	case HAL_TX_QUEUE_DATA:
		for (q = 0; q < pCap->halTotalQueues; q++)
			if (ahp->ah_txq[q].tqi_type == HAL_TX_QUEUE_INACTIVE)
				break;
		if (q == pCap->halTotalQueues) {
			HALDEBUG(ah, HAL_DEBUG_ANY,
			    "%s: no available tx queue\n", __func__);
			return -1;
		}
		break;
	default:
		HALDEBUG(ah, HAL_DEBUG_ANY,
		    "%s: bad tx queue type %u\n", __func__, type);
		return -1;
	}

	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: queue %u\n", __func__, q);

	qi = &ahp->ah_txq[q];
	if (qi->tqi_type != HAL_TX_QUEUE_INACTIVE) {
		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: tx queue %u already active\n",
		    __func__, q);
		return -1;
	}
	OS_MEMZERO(qi, sizeof(HAL_TX_QUEUE_INFO));
	qi->tqi_type = type;
	if (qInfo == AH_NULL) {
		qi->tqi_qflags = defqflags;
		qi->tqi_aifs = INIT_AIFS;
		qi->tqi_cwmin = HAL_TXQ_USEDEFAULT;	/* NB: do at reset */
		qi->tqi_cwmax = INIT_CWMAX;
		qi->tqi_shretry = INIT_SH_RETRY;
		qi->tqi_lgretry = INIT_LG_RETRY;
		qi->tqi_physCompBuf = 0;
	} else {
		qi->tqi_physCompBuf = qInfo->tqi_compBuf;
		(void) ar5212SetTxQueueProps(ah, q, qInfo);
	}
	/* NB: must be followed by ar5212ResetTxQueue */
	return q;
}

/*
 * Update the h/w interrupt registers to reflect a tx q's configuration.
 */
static void
setTxQInterrupts(struct ath_hal *ah, HAL_TX_QUEUE_INFO *qi)
{
	struct ath_hal_5212 *ahp = AH5212(ah);

	HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
	    "%s: tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n", __func__,
	    ahp->ah_txOkInterruptMask, ahp->ah_txErrInterruptMask,
	    ahp->ah_txDescInterruptMask, ahp->ah_txEolInterruptMask,
	    ahp->ah_txUrnInterruptMask);

	OS_REG_WRITE(ah, AR_IMR_S0,
		  SM(ahp->ah_txOkInterruptMask, AR_IMR_S0_QCU_TXOK)
		| SM(ahp->ah_txDescInterruptMask, AR_IMR_S0_QCU_TXDESC)
	);
	OS_REG_WRITE(ah, AR_IMR_S1,
		  SM(ahp->ah_txErrInterruptMask, AR_IMR_S1_QCU_TXERR)
		| SM(ahp->ah_txEolInterruptMask, AR_IMR_S1_QCU_TXEOL)
	);
	OS_REG_RMW_FIELD(ah, AR_IMR_S2,
		AR_IMR_S2_QCU_TXURN, ahp->ah_txUrnInterruptMask);
}

/*
 * Free a tx DCU/QCU combination.
 */
HAL_BOOL
ar5212ReleaseTxQueue(struct ath_hal *ah, u_int q)
{
	struct ath_hal_5212 *ahp = AH5212(ah);
	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
	HAL_TX_QUEUE_INFO *qi;

	if (q >= pCap->halTotalQueues) {
		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
		    __func__, q);
		return AH_FALSE;
	}
	qi = &ahp->ah_txq[q];
	if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
		HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: inactive queue %u\n",
		    __func__, q);
		return AH_FALSE;
	}

	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: release queue %u\n", __func__, q);

	qi->tqi_type = HAL_TX_QUEUE_INACTIVE;
	ahp->ah_txOkInterruptMask &= ~(1 << q);
	ahp->ah_txErrInterruptMask &= ~(1 << q);
	ahp->ah_txDescInterruptMask &= ~(1 << q);
	ahp->ah_txEolInterruptMask &= ~(1 << q);
	ahp->ah_txUrnInterruptMask &= ~(1 << q);
	setTxQInterrupts(ah, qi);

	return AH_TRUE;
}

/*
 * Set the retry, aifs, cwmin/max, readyTime regs for specified queue
 * Assumes:
 *  phwChannel has been set to point to the current channel
 */
HAL_BOOL
ar5212ResetTxQueue(struct ath_hal *ah, u_int q)
{
	struct ath_hal_5212 *ahp = AH5212(ah);
	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
	HAL_CHANNEL_INTERNAL *chan = AH_PRIVATE(ah)->ah_curchan;
	HAL_TX_QUEUE_INFO *qi;
	uint32_t cwMin, chanCwMin, value, qmisc, dmisc;

	if (q >= pCap->halTotalQueues) {
		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
		    __func__, q);
		return AH_FALSE;
	}
	qi = &ahp->ah_txq[q];
	if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
		HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: inactive queue %u\n",
		    __func__, q);
		return AH_TRUE;		/* XXX??? */
	}

	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: reset queue %u\n", __func__, q);

	if (qi->tqi_cwmin == HAL_TXQ_USEDEFAULT) {
		/*
		 * Select cwmin according to channel type.
		 * NB: chan can be NULL during attach
		 */
		if (chan && IS_CHAN_B(chan))
			chanCwMin = INIT_CWMIN_11B;
		else
			chanCwMin = INIT_CWMIN;
		/* make sure that the CWmin is of the form (2^n - 1) */
		for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1)
			;
	} else
		cwMin = qi->tqi_cwmin;

	/* set cwMin/Max and AIFS values */
	OS_REG_WRITE(ah, AR_DLCL_IFS(q),
		  SM(cwMin, AR_D_LCL_IFS_CWMIN)
		| SM(qi->tqi_cwmax, AR_D_LCL_IFS_CWMAX)
		| SM(qi->tqi_aifs, AR_D_LCL_IFS_AIFS));

	/* Set retry limit values */
	OS_REG_WRITE(ah, AR_DRETRY_LIMIT(q), 
		   SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH)
		 | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG)
		 | SM(qi->tqi_lgretry, AR_D_RETRY_LIMIT_FR_LG)
		 | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)
	);

	/* NB: always enable early termination on the QCU */
	qmisc = AR_Q_MISC_DCU_EARLY_TERM_REQ
	      | SM(AR_Q_MISC_FSP_ASAP, AR_Q_MISC_FSP);

	/* NB: always enable DCU to wait for next fragment from QCU */
	dmisc = AR_D_MISC_FRAG_WAIT_EN;

#ifdef AH_SUPPORT_5311
	if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_OAHU) {
		/* Configure DCU to use the global sequence count */
		dmisc |= AR5311_D_MISC_SEQ_NUM_CONTROL;
	}
#endif
	/* multiqueue support */
	if (qi->tqi_cbrPeriod) {
		OS_REG_WRITE(ah, AR_QCBRCFG(q), 
			  SM(qi->tqi_cbrPeriod,AR_Q_CBRCFG_CBR_INTERVAL)
			| SM(qi->tqi_cbrOverflowLimit, AR_Q_CBRCFG_CBR_OVF_THRESH));
		qmisc = (qmisc &~ AR_Q_MISC_FSP) | AR_Q_MISC_FSP_CBR;
		if (qi->tqi_cbrOverflowLimit)
			qmisc |= AR_Q_MISC_CBR_EXP_CNTR_LIMIT;
	}
	if (qi->tqi_readyTime) {
		OS_REG_WRITE(ah, AR_QRDYTIMECFG(q),
			  SM(qi->tqi_readyTime, AR_Q_RDYTIMECFG_INT)
			| AR_Q_RDYTIMECFG_ENA);
	}
	
	OS_REG_WRITE(ah, AR_DCHNTIME(q),
		  SM(qi->tqi_burstTime, AR_D_CHNTIME_DUR)
		| (qi->tqi_burstTime ? AR_D_CHNTIME_EN : 0));

	if (qi->tqi_readyTime &&
	    (qi->tqi_qflags & HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE))
		qmisc |= AR_Q_MISC_RDYTIME_EXP_POLICY;
	if (qi->tqi_qflags & HAL_TXQ_DBA_GATED)
		qmisc = (qmisc &~ AR_Q_MISC_FSP) | AR_Q_MISC_FSP_DBA_GATED;
	if (MS(qmisc, AR_Q_MISC_FSP) != AR_Q_MISC_FSP_ASAP) {
		/*
		 * These are meangingful only when not scheduled asap.
		 */
		if (qi->tqi_qflags & HAL_TXQ_CBR_DIS_BEMPTY)
			qmisc |= AR_Q_MISC_CBR_INCR_DIS0;
		else
			qmisc &= ~AR_Q_MISC_CBR_INCR_DIS0;
		if (qi->tqi_qflags & HAL_TXQ_CBR_DIS_QEMPTY)
			qmisc |= AR_Q_MISC_CBR_INCR_DIS1;
		else
			qmisc &= ~AR_Q_MISC_CBR_INCR_DIS1;
	}

	if (qi->tqi_qflags & HAL_TXQ_BACKOFF_DISABLE)
		dmisc |= AR_D_MISC_POST_FR_BKOFF_DIS;
	if (qi->tqi_qflags & HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE)
		dmisc |= AR_D_MISC_FRAG_BKOFF_EN;
	if (qi->tqi_qflags & HAL_TXQ_ARB_LOCKOUT_GLOBAL)
		dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
			    AR_D_MISC_ARB_LOCKOUT_CNTRL);
	else if (qi->tqi_qflags & HAL_TXQ_ARB_LOCKOUT_INTRA)
		dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_INTRA_FR,
			    AR_D_MISC_ARB_LOCKOUT_CNTRL);
	if (qi->tqi_qflags & HAL_TXQ_IGNORE_VIRTCOL)
		dmisc |= SM(AR_D_MISC_VIR_COL_HANDLING_IGNORE,
			    AR_D_MISC_VIR_COL_HANDLING);
	if (qi->tqi_qflags & HAL_TXQ_SEQNUM_INC_DIS)
		dmisc |= AR_D_MISC_SEQ_NUM_INCR_DIS;

	/*
	 * Fillin type-dependent bits.  Most of this can be
	 * removed by specifying the queue parameters in the
	 * driver; it's here for backwards compatibility.
	 */
	switch (qi->tqi_type) {
	case HAL_TX_QUEUE_BEACON:		/* beacon frames */
		qmisc |= AR_Q_MISC_FSP_DBA_GATED
		      |  AR_Q_MISC_BEACON_USE
		      |  AR_Q_MISC_CBR_INCR_DIS1;

		dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
			    AR_D_MISC_ARB_LOCKOUT_CNTRL)
		      |  AR_D_MISC_BEACON_USE
		      |  AR_D_MISC_POST_FR_BKOFF_DIS;
		break;
	case HAL_TX_QUEUE_CAB:			/* CAB  frames */
		/* 
		 * No longer Enable AR_Q_MISC_RDYTIME_EXP_POLICY,
		 * There is an issue with the CAB Queue
		 * not properly refreshing the Tx descriptor if
		 * the TXE clear setting is used.
		 */
		qmisc |= AR_Q_MISC_FSP_DBA_GATED
		      |  AR_Q_MISC_CBR_INCR_DIS1
		      |  AR_Q_MISC_CBR_INCR_DIS0;

		if (!qi->tqi_readyTime) {
			/*
			 * NB: don't set default ready time if driver
			 * has explicitly specified something.  This is
			 * here solely for backwards compatibility.
			 */
			value = (ahp->ah_beaconInterval
				- (ath_hal_sw_beacon_response_time -
					ath_hal_dma_beacon_response_time)
				- ath_hal_additional_swba_backoff) * 1024;
			OS_REG_WRITE(ah, AR_QRDYTIMECFG(q), value | AR_Q_RDYTIMECFG_ENA);
		}
		dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
			    AR_D_MISC_ARB_LOCKOUT_CNTRL);
		break;
	default:			/* NB: silence compiler */
		break;
	}

	OS_REG_WRITE(ah, AR_QMISC(q), qmisc);
	OS_REG_WRITE(ah, AR_DMISC(q), dmisc);

	/* Setup compression scratchpad buffer */
	/* 
	 * XXX: calling this asynchronously to queue operation can
	 *      cause unexpected behavior!!!
	 */
	if (qi->tqi_physCompBuf) {
		HALASSERT(qi->tqi_type == HAL_TX_QUEUE_DATA ||
			  qi->tqi_type == HAL_TX_QUEUE_UAPSD);
		OS_REG_WRITE(ah, AR_Q_CBBS, (80 + 2*q));
		OS_REG_WRITE(ah, AR_Q_CBBA, qi->tqi_physCompBuf);
		OS_REG_WRITE(ah, AR_Q_CBC,  HAL_COMP_BUF_MAX_SIZE/1024);
		OS_REG_WRITE(ah, AR_Q0_MISC + 4*q,
			     OS_REG_READ(ah, AR_Q0_MISC + 4*q)
			     | AR_Q_MISC_QCU_COMP_EN);
	}
	
	/*
	 * Always update the secondary interrupt mask registers - this
	 * could be a new queue getting enabled in a running system or
	 * hw getting re-initialized during a reset!
	 *
	 * Since we don't differentiate between tx interrupts corresponding
	 * to individual queues - secondary tx mask regs are always unmasked;
	 * tx interrupts are enabled/disabled for all queues collectively
	 * using the primary mask reg
	 */
	if (qi->tqi_qflags & HAL_TXQ_TXOKINT_ENABLE)
		ahp->ah_txOkInterruptMask |= 1 << q;
	else
		ahp->ah_txOkInterruptMask &= ~(1 << q);
	if (qi->tqi_qflags & HAL_TXQ_TXERRINT_ENABLE)
		ahp->ah_txErrInterruptMask |= 1 << q;